hi.I Downloaded a m2ts video that is 1920x1080 . but when i want play on ps3 it's plays witout sound ! i have some m2ts files that isn't HD , but them plays without problem.
dose anyone to know ?

Uh, I'm no expert, but maybe you should check to see if it's got an audio stream at all.

Does it play fine on VLC or Media Player Classic?

it's work on my PC without any problem.on ps3 i have this problem !

Can you tell what your video and audio streams are? If the audio format is AAC, then it's not going to play on the PS3. (I've been having this same problem.) You'll have to convert it to AC3 in order for it to work on the PS3.

Since the video is m2ts, it'll play fine (which it does). Compare your m2ts to your other m2ts files - do the others have a different audio format than the one you're having problems with?

That seems to be the most likely answer.

...then again, I'm pulling this out of my ass, so who knows. Hope it helps, though.

Information of flie that can't play:
File type:TS
Size:406mb
Length:3'42
Resolution:1920x1080
Video codec:MPEG-2 15-3mbps
Audio codec:--

Information of flie that can play:
File type:TS
Size:85mb
Length:3'01
Resolution:704x576
Video codec:MPEG-2 3.8mbps
Audio codec:MPEG Layer2 128kbps

see... the full HD file haven't any audio !

Uh... try this, then.

1.) Download TSMuxer, unzip it, and run it. (It's all-inclusive, so there's no installing necessary.)

2.) Set the Output to "Demux," and then open your m2ts file.

3.) You should see two streams there - your video stream and your audio stream.

If you only see a video stream (the TS one), then you just don't have any audio in the m2ts container.

If you see both streams, then demux them both.

4.) You should then be able to convert the audio stream into a compliant .ac3 stream. (I use MeGUI just because I also use it to hardsub my videos, too.)

5.) Mux the new .ac3 stream and the .ts video into the m2ts container again, and it should work properly.

6.) If it doesn't work, let me know what the audio stream is and I'll get back to you on that.

So, simplified:

1.) Download TSMuxer.
2.) Demux.
3.) Convert audio.
4.) Mux.

Hope that helps.

m2ts files don't play with mpeg audio, you should convert them to ac3 using VLC wizard

Thanks all of you.

Now it's play 5 second and then Fereez ! on my pc too .

Well, what did you do? Did you convert the audio? What'd you use to do it?

1.) Download TSMuxer.
2.) Demux.
3.) Convert audio.
4.) Mux.


i did like this.
but it's can't play

What filetype was the original audio? What did you convert it to? And what did you use to convert it?

AC3Filter was orginal audio file type.a52 is codec.i used TSMuxer for covert audio.it's will convert but have problem (fereez !)

when i want to use megui show this error:
The application failed to initialize properly (0x0000135). Click on OK to terminate the application.

I'm also having the same problem. The MKV has audio but when I put it in tsMuxer there is no Track 2 or audio track. It plays fine on VLC player.

What is the source audio type? AAC, AC3???

It's AC3 on mine. I checked using mkvinfoGUI. There must be something wrong.

Originally posted by NarutoUzu:

---

It's AC3 on mine. I checked using mkvinfoGUI. There must be something wrong.

---

Run it through delay cut, this may fix whatever is wrong with the track. Or convert it with eac3to/eac3toGUI to another AC3 track.

Could you possible upload the track if it is small enough.

Originally posted by odin24:

---

Originally posted by NarutoUzu:

---

It's AC3 on mine. I checked using mkvinfoGUI. There must be something wrong.

---

Run it through delay cut, this may fix whatever is wrong with the track. Or convert it with eac3to/eac3toGUI to another AC3 track.

Could you possible upload the track if it is small enough.

---

Upload it where? And is the delay cut in eac3toGUI? Thanks for helping out by the way Odin. :)

Ok, here it is: -

(MKVInfo) |+ Segment tracks at 4291
(MKVInfo) | + A track at 4297
(MKVInfo) | + Track number: 1 at 4299
(MKVInfo) | + Track UID: 2093505896 at 4302
(MKVInfo) | + Track type: audio at 4309
(MKVInfo) | + Enabled: 1 at 4312
(MKVInfo) | + Default flag: 1 at 4315
(MKVInfo) | + Forced flag: 0 at 4318
(MKVInfo) | + Lacing flag: 1 at 4322
(MKVInfo) | + MinCache: 0 at 4325
(MKVInfo) | + Timecode scale: 1.000000 at 4329
(MKVInfo) | + Max BlockAddition ID: 0 at 4337
(MKVInfo) | + Codec ID: A_AC3 at 4341
(MKVInfo) | + Codec decode all: 1 at 4348
(MKVInfo) | + Default duration: 32.000ms (31.250 fps for a video track) at 4351
(MKVInfo) | + Language: und at 4359
(MKVInfo) | + Audio track at 4366
(MKVInfo) | + Sampling frequency: 48000.000000 at 4368
(MKVInfo) | + Channels: 2 at 4374
(MKVInfo) | + A track at 4377
(MKVInfo) | + Track number: 2 at 4380
(MKVInfo) | + Track UID: 1 at 4383
(MKVInfo) | + Track type: video at 4387
(MKVInfo) | + Enabled: 1 at 4390
(MKVInfo) | + Default flag: 1 at 4393
(MKVInfo) | + Forced flag: 0 at 4396
(MKVInfo) | + Lacing flag: 0 at 4400
(MKVInfo) | + MinCache: 1 at 4403
(MKVInfo) | + Timecode scale: 1.000000 at 4407
(MKVInfo) | + Max BlockAddition ID: 0 at 4415
(MKVInfo) | + Codec ID: V_MPEG4/ISO/AVC at 4419
(MKVInfo) | + Codec decode all: 1 at 4436
(MKVInfo) | + CodecPrivate, length 40 at 4439
(MKVInfo) | + Default duration: 41.708ms (23.976 fps for a video track) at 4482
(MKVInfo) | + Language: eng at 4490
(MKVInfo) | + Video track at 4497
(MKVInfo) | + Pixel width: 1280 at 4499
(MKVInfo) | + Pixel height: 720 at 4503
(MKVInfo) | + Interlaced: 0 at 4507
(MKVInfo) | + Display width: 16 at 4510
(MKVInfo) | + Display height: 9 at 4514
(MKVInfo) |+ EbmlVoid (size: 1024) at 4518
(MKVInfo) |+ Cluster at 5545

I believe you can get delay cut from www.digitaldigest.com, eac3 you can get there as well, or here... I think. They are two separate unrelated programs.

I thought eac3 was free. The site you gave me must be wrong. It's ok though odin I already have eac3to and eac3GUI. I will keep working on this MKV file and if I have more problems I will post about it.