Originally posted by NEDSER:

---

Id say its a signal problem i had a similar situation in a house i was doing one in it was a fairly old spilter he had and when he got it updated it wored fine..

---

I have a signal problem, how would I update the splitter? Its a brand new apartment and my signal is all broken up with a two month old 2007 box. The funny thing is, that the signal was fine for the first three weeks and it started glitching a bit about two weeks ago, to the point now where its glitching so badly its unwatchable. My signal is at 90% on most channels but drops to 88/89 when glitching. I'm in the heart of D4 with Anti hell.

Any help out there?

Cheers bob66
A friend of mine locked his out twice!!

All you have to do to update the EUROVOX MAX 2007 box to the new NTL codes is do a rescan. Connecting to computer is not necessary.
Go to user Install and do a quick scan in Chanel Manager (RED BUTTON)
and HEY PRESTO!!
The EUROVOX MAX 2007 is an AUTO UPDATE box.

Originally posted by witnessf:

---

Originally posted by NEDSER:

---

Id say its a signal problem i had a similar situation in a house i was doing one in it was a fairly old spilter he had and when he got it updated it wored fine..

---

I have a signal problem, how would I update the splitter? Its a brand new apartment and my signal is all broken up with a two month old 2007 box. The funny thing is, that the signal was fine for the first three weeks and it started glitching a bit about two weeks ago, to the point now where its glitching so badly its unwatchable. My signal is at 90% on most channels but drops to 88/89 when glitching. I'm in the heart of D4 with Anti hell.

Any help out there?

---

If an autoscan does not work check your connections to make sure they are good.

If an autoscan does not work check your connections to make sure they are good.

---

connections are good, as Anti Hell digi TV box works fine, not a glitch in sight. Getting a go of the new 2008 box tonight, hopefully that will work. But I'd be surprised.

Originally posted by witnessf:

---

If an autoscan does not work check your connections to make sure they are good.

---

connections are good, as Anti Hell digi TV box works fine, not a glitch in sight. Getting a go of the new 2008 box tonight, hopefully that will work. But I'd be surprised.

---

Have you got the right frequencies and symbolrate?
Do a powerscan from 291-395Mhz with a symbolrate of 6887

There are some areas in IRELAND where eurovoxes are giving problems its not the box it will work fine anywhere else but in some areas cable providers have downgraded the signal. I sell boxes so i know many of my customers in dublin and some other areas of ireland are using eurvox 2006, which is working fine. they all had eurovox 2007 and it worked fine for some time but after once the providers downgraded the signal they wont work properly. I would say just try to get hold of GENUINE 2006 eurovox thats the only solution.

Originally posted by Cablemtk:

---

There are some areas in IRELAND where eurovoxes are giving problems its not the box it will work fine anywhere else but in some areas cable providers have downgraded the signal. I sell boxes so i know many of my customers in dublin and some other areas of ireland are using eurvox 2006, which is working fine. they all had eurovox 2007 and it worked fine for some time but after once the providers downgraded the signal they wont work properly. I would say just try to get hold of GENUINE 2006 eurovox thats the only solution.

---

you are dead right unfortunately certain cable providers are down grading the signal in certain areas of Ireland and the only thing you can do is try get hold of a 2006 box as they work just fine, that's what i did and no longer have any signal problems..

Can they really be downgrading the signal, my tv is still fine and my 4mb broadband is still flying at full speed...........I'm sure there is something else going on!!

Going off the box, once the channels are found the signal goes up and down like a brides nightie.....but it can't be as its works fine as above...so must be something on the box imo

Originally posted by luckyluca:

---

Can they really be downgrading the signal, my tv is still fine and my 4mb broadband is still flying at full speed...........I'm sure there is something else going on!!

Going off the box, once the channels are found the signal goes up and down like a brides nightie.....but it can't be as its works fine as above...so must be something on the box imo

---

I can understand what you saying but remember you get TV, TELEPHONE, INTERNET on ONE SINGLE SAME Cable so its the game of frequency in this case. It works same way some people get 2mbps and next door neighbour has 8mbps broadband. so they limit the use according to the need of the customer or subscription level. So same goes with TV services and others as well. Ans yes they can downgrade the strength without effecting anything else.

Originally posted by luckyluca:

---

Can they really be downgrading the signal, my tv is still fine and my 4mb broadband is still flying at full speed...........I'm sure there is something else going on!!

Going off the box, once the channels are found the signal goes up and down like a brides nightie.....but it can't be as its works fine as above...so must be something on the box imo

---

I agree I think there is something going on.
I don't think they would downgrade there signal,
there would be too many complaints

I can't really go into detail but i know for a fact that a certain cable provider are indeed downgrading the signal in certain areas of the country, whatever way they do it it's affecting the boxes and not the analogue channels on normal tv or their digital packages

I had the same issue - lost 98% of channels
To resolve:
Go to Menu -
Select Installation -
Select User Installation -
input pin
Hit red button for auto scan - This refreshed all the channels ok.

Ta for the help.

B

I still can't believe this is a downgrade issue, I get the full tv xl package and this is working fine....if there is signal to provide that, surely there would also be enough for the other, when connected on the full stream ???

For me its the fact the Eurovox signal is up and down constantly on the channel selected, if this was happening on the line it would affect the normal tv packages....I think its a hardware issue

Originally posted by luckyluca:

---

I still can't believe this is a downgrade issue, I get the full tv xl package and this is working fine....if there is signal to provide that, surely there would also be enough for the other, when connected on the full stream ???

For me its the fact the Eurovox signal is up and down constantly on the channel selected, if this was happening on the line it would affect the normal tv packages....I think its a hardware issue

---

May be people dont realise that they have clone boxes. Main difference in clone eurovoxes and clone starview compared to original ones was TUNER. Clones had crap tuner so i am sure who ever is having these problems have clone boxes. And yes before anyone say let me clear it yes clones do work fine for days and even weeks but dont last for years.

Your Right,

I've sold alot of 2006's, & 2007's and i've never had A problem,
They either have clone boxes, or bad conections.

Well I have checked the connections and the signal status is good and all settings fine.........are there cloned black 2008 boxes out there??

Could be just a faulty tuner in a legitimate box.....

its the two combined , the boxes tuner seems very sensitive so if theres any splitting it can't handle it , the 2006 boxes work fine as does the digivox on the same input and it does appear that in darndale and ringend the signal is just slightly down... so if your in those areas i'd recomend a different box maybe swap with someone who's area is not effected...

Originally posted by barm:

---

Originally posted by witnessf:

---

If an autoscan does not work check your connections to make sure they are good.

---

connections are good, as Anti Hell digi TV box works fine, not a glitch in sight. Getting a go of the new 2008 box tonight, hopefully that will work. But I'd be surprised.

---

Have you got the right frequencies and symbolrate?
Do a powerscan from 291-395Mhz with a symbolrate of 6887

---

I updated the firmware on my 2007 Eurovox and the picture is perfect. Even though the signals qualities (85-90%) are the same, the box isn’t glitching at all, which is a relief.

Just got a Eurovox 2008 box, anyone got the software for it? much appreciated :)

Tracy

Originally posted by tracy_dub:

---

Just got a Eurovox 2008 box, anyone got the software for it? much appreciated :)

Tracy

---

Tracy,

You will find all you need in the link at the bottom of Steo's post here http://forums.afterdawn.com/thread_view.cfm/2/535766

Great thanks!!

Originally posted by tracy_dub:

---

Great thanks!!

---

Youre Welcome :)

Hi guys, just got a new Eurovox 2008, I have downloaded the software ok, but it will not update the codes for me once i download the channels, can anyone help with this?

Thanks a mill

You will need the codes for the area you are in, where are you?