1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

ImgBurn all the sudden not working.... please help

Discussion in 'DVDR' started by batgirl07, Dec 8, 2008.

  1. batgirl07

    batgirl07 Member

    Joined:
    Dec 8, 2008
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    It'll take a couple mins to load a dvd. But the main problem is that when I put in a blank DVD-R, it just spins and it keeps programs from running. For example, I'm trying to burn a movie from my hard drive (which I've done a thousand times!) and ImgBurn keeps spitting it out. Then I tried a couple other burning software and they either won't load or they go "not responding" BUT if I take the DVD out, the software works without delay. But as soon as I load up the DVD my computer freezes. I just recovered the computer due to a virus so everything should be running smoothly. Please help. What could be the problem? Then I tried a couple things and Imgburn worked til about 47% done and I got an i/o error and here's the log:

    I 11:06:37 ImgBurn Version 2.4.2.0 started!
    I 11:06:37 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3)
    I 11:06:37 Total Physical Memory: 981,488 KB - Available: 360,588 KB
    W 11:06:37 Drive D:\ (FAT32) does not support single files > 4 GB in size.
    I 11:06:37 Initialising SPTI...
    I 11:06:37 Searching for SCSI / ATAPI devices...
    I 11:06:37 Found 1 DVD±RW/RAM!
    I 11:06:45 Operation Started!
    I 11:06:45 Source File: C:\HELL_RIDE.ISO
    I 11:06:45 Source File Sectors: 2,285,862 (MODE1/2048)
    I 11:06:45 Source File Size: 4,681,445,376 bytes
    I 11:06:45 Source File Volume Identifier: HELL_RIDE
    I 11:06:45 Source File Volume Set Identifier: 05CBE11BDVDSHRNK
    I 11:06:45 Source File Implementation Identifier: DVD Shrink
    I 11:06:45 Source File File System(s): ISO9660, UDF (1.02)
    I 11:06:45 Destination Device: [5:0:0] HL-DT-ST DVDRRW GSA-H21L L702 (E:) (ATA)
    I 11:06:45 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) (Speeds: 4x)
    I 11:06:45 Destination Media Sectors: 2,285,872
    I 11:06:45 Write Mode: DVD
    I 11:06:45 Write Type: DAO
    I 11:06:45 Write Speed: MAX
    I 11:06:45 Link Size: Auto
    I 11:06:45 Test Mode: No
    I 11:06:45 OPC: No
    I 11:06:45 BURN-Proof: Enabled
    E 11:06:47 Failed to Reserve Track! - Reason: Invalid Field in CDB
    E 11:06:51 Operation Failed! - Duration: 00:00:05
    I 11:06:51 Average Write Rate: N/A - Maximum Write Rate: N/A
    I 11:08:06 Operation Started!
    I 11:08:06 Source File: C:\HELL_RIDE.ISO
    I 11:08:06 Source File Sectors: 2,285,862 (MODE1/2048)
    I 11:08:06 Source File Size: 4,681,445,376 bytes
    I 11:08:06 Source File Volume Identifier: HELL_RIDE
    I 11:08:06 Source File Volume Set Identifier: 05CBE11BDVDSHRNK
    I 11:08:06 Source File Implementation Identifier: DVD Shrink
    I 11:08:06 Source File File System(s): ISO9660, UDF (1.02)
    I 11:08:06 Destination Device: [5:0:0] HL-DT-ST DVDRRW GSA-H21L L702 (E:) (ATA)
    I 11:08:06 Destination Media Type: DVD-R (Disc ID: RITEKF1) (Speeds: 4x)
    I 11:08:06 Destination Media Sectors: 2,298,496
    I 11:08:06 Write Mode: DVD
    I 11:08:06 Write Type: DAO
    I 11:08:06 Write Speed: MAX
    I 11:08:06 Link Size: Auto
    I 11:08:06 Test Mode: No
    I 11:08:06 OPC: No
    I 11:08:06 BURN-Proof: Enabled
    I 11:08:06 Filling Buffer... (20 MB)
    I 11:08:07 Writing LeadIn...
    W 11:08:15 Failed to Write Sectors 0 - 31 - Reason: Unknown (Write Error) (0x0C, 0x80)
    W 11:08:15 Retrying (1 of 20)...
    W 11:08:15 Retry Failed - Reason: Invalid Address For Write
    W 11:08:15 Retrying (2 of 20)...
    W 11:08:15 Retry Failed - Reason: Invalid Address For Write
    W 11:08:15 Retrying (3 of 20)...
    W 11:08:15 Retry Failed - Reason: Invalid Address For Write
    W 11:08:15 Retrying (4 of 20)...
    W 11:08:15 Retry Failed - Reason: Invalid Address For Write
    W 11:08:15 Retrying (5 of 20)...
    W 11:08:15 Retry Failed - Reason: Invalid Address For Write
    W 11:08:15 Retrying (6 of 20)...
    W 11:08:15 Retry Failed - Reason: Invalid Address For Write
    W 11:08:15 Retrying (7 of 20)...
    W 11:08:15 Retry Failed - Reason: Invalid Address For Write
    W 11:08:15 Retrying (8 of 20)...
    W 11:08:15 Retry Failed - Reason: Invalid Address For Write
    W 11:08:15 Retrying (9 of 20)...
    W 11:08:15 Retry Failed - Reason: Invalid Address For Write
    W 11:08:15 Retrying (10 of 20)...
    W 11:08:15 Retry Failed - Reason: Invalid Address For Write
    W 11:08:15 Retrying (11 of 20)...
    W 11:08:15 Retry Failed - Reason: Invalid Address For Write
    W 11:08:15 Retrying (12 of 20)...
    W 11:08:15 Retry Failed - Reason: Invalid Address For Write
    W 11:08:15 Retrying (13 of 20)...
    W 11:08:15 Retry Failed - Reason: Invalid Address For Write
    W 11:08:15 Retrying (14 of 20)...
    W 11:08:15 Retry Failed - Reason: Invalid Address For Write
    W 11:08:15 Retrying (15 of 20)...
    W 11:08:15 Retry Failed - Reason: Invalid Address For Write
    W 11:08:15 Retrying (16 of 20)...
    W 11:08:15 Retry Failed - Reason: Invalid Address For Write
    W 11:08:15 Retrying (17 of 20)...
    W 11:08:15 Retry Failed - Reason: Invalid Address For Write
    W 11:08:15 Retrying (18 of 20)...
    W 11:08:15 Retry Failed - Reason: Invalid Address For Write
    W 11:08:15 Retrying (19 of 20)...
    W 11:08:15 Retry Failed - Reason: Invalid Address For Write
    W 11:08:15 Retrying (20 of 20)...
    W 11:08:15 Retry Failed - Reason: Invalid Address For Write
    E 11:08:23 Failed to Write Sectors 0 - 31 - Reason: Unknown (Write Error) (0x0C, 0x80)
    E 11:08:23 Next Writable Address: 0
    I 11:08:23 Synchronising Cache...
    E 11:08:26 Failed to Write Image!
    E 11:08:26 Operation Failed! - Duration: 00:00:19
    I 11:08:26 Average Write Rate: N/A - Maximum Write Rate: N/A
    I 11:09:50 Operation Started!
    I 11:09:50 Source File: C:\HELL_RIDE.ISO
    I 11:09:50 Source File Sectors: 2,285,862 (MODE1/2048)
    I 11:09:50 Source File Size: 4,681,445,376 bytes
    I 11:09:50 Source File Volume Identifier: HELL_RIDE
    I 11:09:50 Source File Volume Set Identifier: 05CBE11BDVDSHRNK
    I 11:09:50 Source File Implementation Identifier: DVD Shrink
    I 11:09:50 Source File File System(s): ISO9660, UDF (1.02)
    I 11:09:50 Destination Device: [5:0:0] HL-DT-ST DVDRRW GSA-H21L L702 (E:) (ATA)
    I 11:09:50 Destination Media Type: DVD-R (Disc ID: RITEKF1) (Speeds: 4x)
    I 11:09:50 Destination Media Sectors: 2,285,872
    I 11:09:50 Write Mode: DVD
    I 11:09:50 Write Type: DAO
    I 11:09:50 Write Speed: 16x
    I 11:09:50 Link Size: Auto
    I 11:09:50 Test Mode: No
    I 11:09:50 OPC: No
    I 11:09:50 BURN-Proof: Enabled
    E 11:09:54 Failed to Reserve Track! - Reason: Invalid Field in CDB
    E 11:09:56 Operation Failed! - Duration: 00:00:06
    I 11:09:56 Average Write Rate: N/A - Maximum Write Rate: N/A
     
  2. ZoSoIV

    ZoSoIV Active member

    Joined:
    Oct 24, 2007
    Messages:
    3,454
    Likes Received:
    0
    Trophy Points:
    66
    do a clean re-install of you're burning programs imgburn etc. use better media like Taiyo Yuden or Verbatim burning at 6x to 8x max . make sure you have the most up to date firmware for you're drive/burner
     
  3. batgirl07

    batgirl07 Member

    Joined:
    Dec 8, 2008
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    I uninstalled and reinstalled imgburn a couple times, I even installed several different versions and I still get the same result. I can't really afford Verbatim media. I usually buy Sony, TDK, Maxell and I've never had a problem before.

    I will try the software you recommended and see if that works. How do I check the firmware??? Sorry.. I'm so computer stupid.
     
  4. ZoSoIV

    ZoSoIV Active member

    Joined:
    Oct 24, 2007
    Messages:
    3,454
    Likes Received:
    0
    Trophy Points:
    66
    Last edited: Dec 8, 2008
  5. batgirl07

    batgirl07 Member

    Joined:
    Dec 8, 2008
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    OK i did that and it says my current firmware is L702.. now where do i go from here?
     
    Last edited: Dec 8, 2008
  6. ZoSoIV

    ZoSoIV Active member

    Joined:
    Oct 24, 2007
    Messages:
    3,454
    Likes Received:
    0
    Trophy Points:
    66
    post the make and model of your drive/burner and i will look for you!

    also how old is the drive/burner? it may be shot!
     
    Last edited: Dec 8, 2008
  7. batgirl07

    batgirl07 Member

    Joined:
    Dec 8, 2008
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    thanx, i reformatted the computer (again) to see if the driver would work but no luck. it'll read a CD but if i put in a dvd or blank dvd disc it freezes and it says "no medium present". could it be that its broken?? i looked into replacing it and found an HP internal burner at bestbuy for $50. Should i just replace the darn thing? my computer is only 2yrs old but i probably burned close to 50-70 maybe 100! dvds in the past few months... after i learned how easy it was. i think i killed it.

    is this the make--> HL-DT-ST DVDRRW GSA-H21L HP Pavilion
    imgburn says my firmware is L702
     
  8. RichVa

    RichVa Member

    Joined:
    Dec 14, 2005
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    50 seems high for a dvd burner. I watch the sales adds and can usually find one for 10 to 20 less. Not a big difference, but hey times are tight.
    Ive used a number of drives to death over the years. At first I started having issues with discs in that they wouldnt play in some of my dvd players. Eventually the drives started producing discs that did not work at all. The last drive I purchased was an LG and it has lasted longer than many and is still going.
    A bit of tragic comedy: Ive had two drives where the discs exploded in the drives. Another time I was not looking and placed a disc on top of a disc that was already in the drive. It ruined the drive when I tried to write to the stack of two discs.
     
  9. batgirl07

    batgirl07 Member

    Joined:
    Dec 8, 2008
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    This is never ending. I tried to play a regular CD and it worked. After reformatting, I had to install the printer's software... no problem. Here's where it gets weird. I started DVDShrink and I put in a DVD and it took alittle longer for the DVD to play but I was able to back up the DVD. When I started Imgburn to burn it.. NOTHING! It still says "device not present" and the whole computer freezes! I give up. I can't really afford a new DVD writer, I read online where you can clean the lense with rubbing alcohol. I'm not into opening up this computer and messing with the insides. Is it broken, should I repalce it, clean it, nuke it.. I'm so fustrated.
     
  10. ZoSoIV

    ZoSoIV Active member

    Joined:
    Oct 24, 2007
    Messages:
    3,454
    Likes Received:
    0
    Trophy Points:
    66
    you can get a disc cleaner at wal-mart etc for 6 or 7 dollars. new drives on newegg are 20 to 30 dollars for a good one don't spend 50 at best buys
     
  11. batgirl07

    batgirl07 Member

    Joined:
    Dec 8, 2008
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    i did use a CD disc cleaner for CD players, it did say you can use it in your computer. But obviously, it didnt work. Thanx for all your imput though. its nice that you wanna help.
     
  12. ZoSoIV

    ZoSoIV Active member

    Joined:
    Oct 24, 2007
    Messages:
    3,454
    Likes Received:
    0
    Trophy Points:
    66
    then it looks like its time for a new drive/burner or buying a new/better computer
     

Share This Page