I'm using Nero 8.3.6.0 with DVDShrink, and I have for a while. After taking about a month off of copying dvds, with which I've never had any problems, I'm having trouble burning with this version of Nero. The ripping process is fine, and DVDShrink starts the burning with Nero, but I get about 7 - 10% in and I get a burn error message. This part of the burning alone takes 20 minutes, when the whole process used to take 20 minutes. I'm hoping it's not a problem with the drive itself, I'm using a PLDS DVD+-RW DH-16A6S that came with my Dell Inspiron 530s. The computer is just about 6 months old. Also, I'm copying the dvd files to an external harddrive that has about 55Gb of free space, so I don't think that's it either. I'll post the error log below. I took a look at it and found some spots that probably tell me what's wrong, but I don't know how to read it. Thanks for any help.
Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 8.3.6.0 Internal Version: 8, 3, 6, 0 (Nero Express) Recorder: <PLDS DVD+-RW DH-16A6S> Version: YD11 - HA 1 TA 0 - 8.3.6.0 Adapter driver: <Serial ATA> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <PLDS DVD+-RW DH-16A6S>Version: YD11 - HA 1 TA 0 - 8.3.6.0 Adapter driver: <Serial ATA> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD2500AAJS-75B4A0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : PLDS DVD+-RW DH-16A6S atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === PLDS DVD+-RW DH-16A6S D: CdRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2037MB (2085992kB) Free physical memory: 1158MB (1186372kB) Memory in use : 43 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.12.2008 UDF/ISO compilation 11:11:44 AM #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 11:11:45 AM #2 Phase 112 File dlgbrnst.cpp, Line 1767 DVD-Video files reallocation started 11:11:45 AM #3 Phase 114 File dlgbrnst.cpp, Line 1767 DVD-Video files reallocation completed (no file modified) 11:11:45 AM #4 Text 0 File Isodoc.cpp, Line 6713 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 11:11:45 AM #5 Phase 111 File dlgbrnst.cpp, Line 1767 DVD-Video files sorted 11:11:45 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3349 First writeable address = 0 (0x00000000) 11:11:45 AM #7 ISO9660GEN -11 File Geniso.cpp, Line 3349 First writeable address = 0 (0x00000000) 11:11:45 AM #8 Text 0 File Burncd.cpp, Line 3568 Turn on Disc-At-Once, using DVD media 11:11:46 AM #9 Text 0 File FilesystemSettingsValidator.cpp, Line 142 FS Settings: using validator 'CUDFSettingsValidatorDVD' ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical' Changing UDF revision from '1.02' to '1.02' 11:11:46 AM #10 ISO9660GEN -11 File Geniso.cpp, Line 3349 First writeable address = 0 (0x00000000) 11:11:46 AM #11 ISO9660GEN -11 File Geniso.cpp, Line 3349 First writeable address = 0 (0x00000000) 11:11:48 AM #12 Text 0 File DlgWaitCD.cpp, Line 311 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2202143 (489:21.68, 4301MB) 11:11:48 AM #13 Text 0 File DlgWaitCD.cpp, Line 323 Write in overburning mode: NO (enabled: CD) 11:11:48 AM #14 Text 0 File DlgWaitCD.cpp, Line 2948 Recorder: PLDS DVD+-RW DH-16A6S, Media type: DVD-R Disc Manufacturer ID: <TYG02> <> Disc Application Code: 64, Disc Physical Code: 193 11:11:48 AM #15 Text 0 File DlgWaitCD.cpp, Line 497 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:11:48 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 754 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2202144 (2202144) = #2202144/489:21.69 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202144 blocks [D: PLDS DVD+-RW DH-16A6S] -------------------------------------------------------------- 11:11:48 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 956 Prepare [D: PLDS DVD+-RW DH-16A6S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509990912, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2202144 | 0 | 0x00 2202144 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 11:12:08 AM #18 Text 0 File SCSIPTICommands.cpp, Line 264 Error on LockVolume: Access is denied. 11:12:08 AM #19 Text 0 File SCSIPTICommands.cpp, Line 314 SPTI - Error 5 on DismountVolue: Access is denied. 11:12:18 AM #20 Text 0 File SCSIPTICommands.cpp, Line 264 Error on LockVolume: Access is denied. 11:12:18 AM #21 Text 0 File Burncd.cpp, Line 4359 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 11:12:18 AM #22 Phase 24 File dlgbrnst.cpp, Line 1767 Caching of files started 11:12:18 AM #23 Text 0 File Burncd.cpp, Line 4481 Cache writing successful. 11:12:18 AM #24 Phase 25 File dlgbrnst.cpp, Line 1767 Caching of files completed 11:12:18 AM #25 Phase 36 File dlgbrnst.cpp, Line 1767 Burn process started at 8x (11,080 KB/s) 11:12:19 AM #26 Text 0 File ThreadedTransferInterface.cpp, Line 2673 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:12:19 AM #27 Text 0 File DVDR.cpp, Line 3297 Recording mode: Sequential Recording Mode 11:12:19 AM #28 Text 0 File DVDR.cpp, Line 3451 Start write address at LBA 0 DVD high compatibility mode: Yes 11:12:19 AM #29 SPTI -1066 File SCSIPassThrough.cpp, Line 214 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00 Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 Buffer x04ac7f40: Len x648 11:12:19 AM #30 Text 0 File Cdrdrv.cpp, Line 10187 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) Outer Limit of Data Recordable Area: 0 h Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: - Revision number of minimum recording speed: - Revision number table of recording speed: - - - - - - - Class: 0, Extended part version: 0 Start PSN of the Extra Border Zone: 0 h Start PSN of Physical format information blocks in Extra Border Zone: 0 h Media Specific [16..783]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 15 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 01 40 C1 FD 9E D8 52 00 - 02 87 0D 10 66 78 80 00 .@....R.....fx.. 03 54 59 47 30 32 00 00 - 04 00 00 00 00 00 00 00 .TYG02.......... 05 AA A2 22 22 20 02 00 - 06 08 0E 11 87 78 80 00 ...""........x.. 07 88 80 00 00 00 00 00 - 08 06 13 0D 10 0E 07 00 ................ 09 97 07 0D 0B 78 88 00 - 0A 80 00 00 00 00 10 00 .....x.......... 0B 06 18 17 85 78 75 00 - 0C D6 89 A8 92 01 20 00 .....xu......... 0D 10 00 D0 00 00 00 00 - 0E 09 21 35 2D 29 1B 00 ..........!5-).. 0F 50 1B 2B 1D 97 B5 00 - 10 88 84 00 04 00 04 00 .P.+............ 11 00 00 00 00 00 00 00 - 12 09 2D 35 2D 2B 1A 00 ..........-5-+.. 13 50 1D 2B 1F 97 B5 00 - 14 88 80 00 00 00 00 00 .P.+............ 15 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:12:19 AM #31 Text 0 File DVDR.cpp, Line 3589 Reserved Track size: 2202144 (219A20h, 4301MB) -> return code 0 11:12:19 AM #32 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 11:12:47 AM #33 Text 0 File Cdrdrv.cpp, Line 1411 11:12:47.031 - D: PLDS DVD+-RW DH-16A6S : Queue again later 11:30:20 AM #34 SPTI -1135 File SCSIPassThrough.cpp, Line 214 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) CDB Data: 0x2A 00 00 09 9B 00 00 00 20 00 00 00 Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C Buffer x0cb67dc0: Len x10000 0x00 00 01 BA 44 A2 D6 F2 4C 55 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 00 0E 03 50 F3 81 90 00 6E D8 0xA0 33 74 0E 0F 02 79 44 7D 67 64 87 E6 75 81 A1 11:30:20 AM #35 CDR -1135 File Writer.cpp, Line 306 Write error D: PLDS DVD+-RW DH-16A6S 11:30:20 AM #36 Text 0 File DVDR.cpp, Line 3857 EndDAO: Last written address was 629503 (99AFFh) 11:30:20 AM #37 Phase 38 File dlgbrnst.cpp, Line 1767 Burn process failed at 8x (11,080 KB/s) 11:30:20 AM #38 Text 0 File SCSIPTICommands.cpp, Line 314 SPTI - Error 5 on DismountVolue: Access is denied. 11:30:24 AM #39 Text 0 File Cdrdrv.cpp, Line 11450 DriveLocker: UnLockVolume completed 11:30:24 AM #40 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Your DMA is OFF, reset and enable back on. Use this link here http://forums.afterdawn.com/thread_view.cfm/260038 That's a good DVD-R media (Taiyo Yuden). Maybe try them DVD+R from Verbatim or YUDEN to see if you'll get a success. What kind of burner do you have? Is your firmware the latest? Have a look for your burner and it's firmware http://forum.rpc1.org/viewtopic.php?t=38756 Below is a current successful burned Nero log of mine. Really I can't see much comparing yours to mine, except the DMA and maybe have your burner's firmware update if you haven't done so.
Thank you very much, sir. The DMA reset did the trick, and I am back to burning DVDs in under 10 minutes. I have a few friends who had the same problem, so I will spread the word. Is there any reason why this happened? Is it something that I may have accidently triggered, or is it something that I'll just have to keep resetting every so often? Thanks again.
You're welcome - glad your back in business and burning again. I strongly deem that if you've had more than 3 or 4 failure when using Nero to burn, then it "automatically" switch your DMA to OFF or PIO Mode. Good luck.
