I am new at this program and I think I have all the settings correct. 1st I selected the 2 files (video_TS and Audio_TS)in build mode, When I push the green arrow I see the Buffer max out at 100% . The device buffer and complete bars remain blank.The bottom of the error box said: Session Fixation Error Writing Lead In. I am using Memorex blanks and tried several times with different blanks. Thanks CC
Have you tried a different brand? Try a known good brand, like 'Verbatim':set the burn speed at 4x or half the speed listed on the package. If the problem persists, check the firmware version of the burner with Imgburn. 'Tools > Drive > Capabilities' then check for an update.
Also, you don't need to select the audio ts folder, as it's empty. Everything you need should be in the video ts folder.
Thanks. I went to tools in Imgburn. "drive" is greyed out and not accessable. I downloaded this version here 2 months ago. could be it outdated? Is this an uncommon problem?. CC
The latest ImgBurn is 2.4.2.0, if that's your version, then you've got the current version. <><>To burn VIDEO_TS using ImgBurn<><> * start ImgBurn * click on Mode, Build * use the "folder icon" to browse and locate your ready to burn VIDEO_TS * insert a high quality media (YUDEN, Verbatim or SONY) * click on "Device" and "book icon for booktype", select your burner, select DVD+R media * change for DVD-ROM * click change and OK, * change burning speed to 8X, 10X, 12X, 16X (or your desire) * now click "build", relax and ImgBurn should be done within 8 mins or less. NOTE: make sure that all your burner/s has the latest firmware.
I followed the instructions but still no success. How do I update my firmware and is this a common problem? CC
