1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

adding 2nd hard drive

Discussion in 'PC hardware help' started by cfh107, Jan 29, 2009.

  1. cfh107

    cfh107 Member

    Joined:
    Jan 23, 2007
    Messages:
    30
    Likes Received:
    0
    Trophy Points:
    16
    I have now a 300GB SATA HD(10KRPM),Western Digital,VR150 hard drive I want to put a 2nd one is a 160GB Western Digital SATA HD(RMS 7200.What all do I have to do to get it to work?Do I have to go into the BIOS?It is running Vista..
     
    cfh107, Jan 29, 2009
    #1
  2. dailun

    dailun Active member

    Joined:
    Mar 16, 2006
    Messages:
    3,074
    Likes Received:
    0
    Trophy Points:
    66
    1. Power off
    2. Install drive
    3. Connect power cable to drive
    4. Connect SATA cable to drive
    5. Connect other end of SATA cable to the next available SATA connector on the mobo
    6. Power on.
    7. Partition and format as necessary
     
    dailun, Jan 29, 2009
    #2
  3. Shamb1es

    Shamb1es Regular member

    Joined:
    Sep 21, 2008
    Messages:
    279
    Likes Received:
    0
    Trophy Points:
    26
    If it doesn't show up go to your control panel -> administrative tools -> Computer Management -> Storage -> Disk management.

    It will show you a list of all the drives it detects and the partitions, even ones that aren't formatted.
     
    Shamb1es, Jan 30, 2009
    #3

Share This Page