I have a 360 plugged in to a Sony Bravia 40W4000 tv using a component cable. Problem I am having is that when I 1st turn on the 360 and change to the component channel on the tv I receive sound but no picture from 360. After a few times booting the 360 up I receive a black and white picture, after a few more times a grainy colour picture, then eventually after a few more attempts the proper 1080p colour signal. This happens every time I go to use my 360.

Is this likely a problem with my tv component inputs or my 360? I have previously had the 360 into my PC monitor and received HD graphics no problem. Also, I have changed the component cable so that can't be the problem. Thanks in advance.

Yeah mate, the switch on the cable is set to HDTV and there is an option in my 360 setting to select 1080p which my TV supports so I presumed it would work.

Thanks I tried a different input through the component and it worked every time. Also changing my 360 lead off HD made it work all the time too.

I take it this means it is a 360 problem and not my tv. Anyone had this happen before or offer any advice please? Sounds strange to me.