The Box PVR Update

HI can anyone point me in the right direction on how to update the software I've trieds nul moden cable with no luck, can't see anything for this box. Any help greatly received

 

You will find all you need in Eamo's FTA Library about your box okay just go into The Box PVR folder and everything you need is there, link at the bottom of post or just click here and it will take you into the Folder.
http://www.4shared.com/dir/3042613/f6e3421c/sharing.html

 

Thanks malci I'll have a look at those files.

 

Not a problem, plenty of help files besides the Firmware, and it is always kept up to date.

 

All done it's easy when you know how, thanks again great help.

 

Yep. well done with your successful update Good luck and Cheers.

 

Trying to update The b0x, using the 4.57 firmaware and 4.03 loader, but if fails each time,
i have channels from an auto scan but very few work; N*l dublin
im trying to access the E*MU enable option but cannot find it, i have entered loads of codes to try it, from the menu with 1570 &1886 ans so on, but no luck, i attempted to do it from the parentol control view with no luck, any help?

 

If the box has firmware on it at all then you should be able to access the Cas System, (Removed)

EDIT- The above is for the Starview 2 The Box, and not The Box PVR, that is a completely different method of entry and the code is 2007, and auto-update needs to be turned on. (Was going off the version of Firmware you had posted.

 

no luck man,

 

Have a look what it say's in System Information and post exactly.

 

The B0x PVR
dual record pvr
E_ver 4.506, 15 oct 2007

 

Getting a bit confused here now, why are you trying to flash that box with the incorrect Firmware, that Firmware and LOader you have quoted is for Starview The Box, not The Box PVR.

 

iv been trying just about everything at this stage, the link in eamos library for the pvr loader is dead and iv been trying to find it somewhere else with no luck, so iv just tried anything really

 

This is what you want for your box, don't try anything or else you could brick it.

Firmware
http://www.4shared.com/file/77414148/dc7e6e12/StarViewPVR-21122008.html?dirPwdVerified=fe6700bc

Loader
http://www.4shared.com/file/32157004/d1ec34ca/PVR_Loader.html?dirPwdVerified=77fb70e9


You will need to unzip the Loader okay, so have you got Winrar installed.

 

No luck still fails, after 3 attempts, any idea where to go from here?

 

Don't think you are doing it correct, there is a completely different way of doing it so download these help files, that is your best bet, I do not have a PVR here at the minute, and JBVid is your man on them boxes, but have a look at the correct procedure and try it for yourself.

http://www.4shared.com/file/2603936...ade_PVR_Firmware.html?dirPwdVerified=df02cb29

http://www.4shared.com/file/2503807...the_PVR_Firmware.html?dirPwdVerified=df02cb29

http://www.4shared.com/file/3232654...RS_GUIDE_Dec2007.html?dirPwdVerified=df02cb29

 

cheers mate the update worked perfect there, i was at fault for the most part, turned on the auto update and am now rescanning, should work from here out i think,
thanks for the help

 

Well done, you will be alright now, sorry about the little confusion up above, I automatically went off the Firmware Version you posted and so it turned out the wrong box, lucky the Flash did not go on it might have bricked it lol, take care

 

hi malci how are you? good i hope.... right now to the problem bit . i had an sv1 which you sorted me out with befor xmas, its now turned it self in to a brick. so i have just got a new sv4 the box super usb. ive done the useual scan and all is well but i can not get on to the secret menu. the instuctions from your link say code 1570 but nothin happens. just stays on main menu.. any ideas please

 

Replied to your pm, and as said you will not get anywhere until you have Firmware on the box, so I am sure that you are now working on doing exactly that.