Hello, I have a Digivox-T for about a month working fine(over 100 channels). Last couple of days channels are breaking up or getting "Scrambled or Bad Channel" I "factory reset,powered off at back,rescan,emu to on and set default key and exit out let it update" but they are still breaking up I also seem to be missing alot of channels(get about 70 channels) I also tried re-downloading the firmware (v3300) and re-scanning but still the same When i go to manual scan the level is 83% Quality 44% It seems to be freq's 290MHz,298MHz,330MHz not working Do I need to re-align the aerial or would a amplifier do
hi, i have digivox T as well level is 83% quality is 72% some times i have the same trouble maby re-align would help alot with scrambled channels or bad channel I get that too but what I noticed was some channels are off till 7pm but I have that problem with premier channel do this: let it on for a minute or two to see if it comes in some times it takes longer but i would align the aerial again it would help some times birds land on the aerial as well just a few points to look at T
Cheers tdtd80 I read this on another thread Intermittent Signal Quality Fluctuations suse103, problem was the god damn power supply. had read before about this issue but it didn't twig with me over the past few days as the reason for this problem. my psu was only 12V (although I thought I read it could deliver more), swapped it out with an 18V and everything is perfect now. interesting though that the 12V was at times adequate to drive the downconverter.. obviously needs a little more ooomph thanks for your help. Mine is 24DC 350mA Output, is this what you have? Is it tricy to re-align the aerial. Would you load up the manual scan screen and move the aerial while watching the signal strenght and quality bars?
this is the one i bought with my box http://www.bubblesupplies.co.uk/pro...-(for-Chorus-Ireland-{47}-MMDS-dish)-24V.html glad to hear you got it sorted..... as for the aeriel I was lucky I have direct sight to the transmitter i put it up myself and faced it over there and it worked.. have a look at you neighbours and see which way they are facing ??? just a story: I had sky through the dish, with 50% strength and 50% quality and the bar used to go up and down... but when it rained it used to drop alot and go off so the better the signal strength and quality the better picture i suppose you can move the aerial a little to see if it helps ps... mind yourself on the roof T
Cheers tdtd80, No its still losing connection to some freq's like 298MHz,connects 80% strenght 40% quality then disconnects, connects then disconnects That quote above was from someone else with same issue as me who fixed it by changing power supply My power supply is 24V 350mA like yours so maybe its faulty or dish mis-aligned Strange things is last week they were all working fine
its strange that it was working fine last week for you I suppose that they are selling so fast that they are making them fast too where quality in their work may be getting low... if your friends have the set-up bring your box to their house and set it up there ??? T
Hi tdtd80, Went and bought a new power supply in town Antiference Pro Series 12V 100mA Signal now locking and signal quality gone from 40% to 52% Seems the power supplies we have are not the best http://www.skywonder.co.uk/product.php?productid=1100&cat=0&page=1 If you have any more problems with your signal you should get a better one Thanks for your help
Are yous on Ch888s mmds ? I've had the same problem with those frequenices on the cable network im in meath
Ya Ch888s mmds was losing channels on certain freq's eg 298MHz Those cheap power supplies are not great better off getting a decent one
hi timo these are the freq i got and below ones that are'nt working 274.000 371.000 282.000 378.000 290.000 386.000 298.000 394.000 306.000 410.000 314.000 426.000 322.000 Freqs not working 274,282,290,306,378,386,394 this is what i hav now got, of the cable network. Can u or anyone add to this!!!! I did a manual scan and this is whant i got the ones with D create duplicate stations so i deleted them. Still missing a few channels (MuTv ClTv etc.) User Install CH NUM Frequency Symbol Rate 0001 316 6875 322 6875 0003 339 6875 341 6875 0005 347 6875 D 349 6875 0007 355 6875 0008 D 357 6875 D 363 6875 0010 366 6875 0011 371 6875 D 373 6875 0013 388 6875 0014 D 390 6875 D 396 6875 0016 398 6875 0017 409 6875 D 411 6875 0019 417 6875 0020 D 419 6875 D 425 6875 0022 427 6875 0023 443 6875 D 446 6875 0025 451 6875 0026 D 453 6875
WOW dont know what happen ther the user install had got spaces any way the ch numbers are per line no ch 2 just freqs and its like that with a few, thinking about getting a booster seen a good one thats for digital cable and broadband that might sort me out finger cross
just to let u know a number of channels,3 adults,zee,the box and mutv have changed encryption to the n3 on cable=gone,not too sure about terrestial.
