purchased an AceKard 2i now what?

Ok my R4 card doesn't work in the DSI so after much study here I have purchased a AceKard 2i. Now what do I have to do?

I have the games on a flash drive is it as easy as load the games onto the micro sd and away we go?

thanks
foxxf

 

go to http://www.linfoxdomain.com/nintendo/ds/
i recomend the AKAIO
put this on your micro sd and then add your roms

 

sinno

Thanks for the help, I downloaded AKAIO_v1.4.1Proper and unzipped it, then loaded the folder onto the sd card.

Is this right?

or should I open the folder and load components onto sd card.

anyway then I loaded 2 roms just to see if it works and it says

"system file is missing"

Any ideas????

Thanks everyone
foxxf

 

download the official firmware here http://www.acekard.com/download/ak2/ak2_416_20090404_release.zip

unpack and copy it over to your micro sd card,

your micro sd card should have the following files.

__ak2 (folder)
moonshell (folder) <---- optional for media player.
akmenu4.nds
game1.nds
game2.nds
etc

 

I got this link with video that might help u set up your Acekard 2i card for the dsi

http://www.themott.com/node/32


tony

 

Will try that

Thankyou very much appreciated

 

I have those files on the root of the micro and it still does not work. my dsi doesnt show a picture of the ak card its a blank one,empty. do you have any suggestions on what the problem maybe? i just got my ak2i today and i've been working on it for the last 3hrs and no solution. thank you in advance

 

looks like your DSi is not seeing the AK2i in the slot. try the paper card trick, put a piece of thin paper on the back on the AK2i, this will push the connect pins closer in. i use masking tapes, that works too.
oh, 1 other thing, try out the AK2i on a DS/DSL if you can to see if its not faulty.

 

ok i tried it with the ds lite and when i put it in the screen stays at the loading sign. and i tried the tape and doesnt show in the slot...

thanks for the help

 

yeah i have a dsone and its the best. however i got a dsi now, not knowing that the dsone was not going to work.

 

I got the Acekard2i, and it's working great for me! I recommend using the AKAIO Firmware over the official firmware. Reason is, I have an 8GB micoSDHC, and it would take a lot of time just to load the card; that was with the official firmware. With AKAIO, it was instant. Great support!

 

Do you have the site where i can get this firmware? I'll give that a try to see if it will work on my AK2i card. my dsi is not ready/picking up the card

 

Ya, here's the wiki page for the firmware:

AKAIO Wiki

 

Mary D7,

Thankyou
Thankyou

I did what you said and it works!!!

My kids are cheering.

Thankyou heaps

Foxxf