Hi All, I have received this box and followed the instructions to load the software on to the box. Unfortunately I have messed up a little, instead of loading the software on to the box, I have loaded the downloader10.exe file directly on to it (loaded this to a named folder on my pc, them downloaded it onto the box). Now I fear the box has 'froze', it now says CHpl (or something similar?) when I switch on the box, does not appear to accept anything else. Can anyone please advise what I can do to correct this, also I could not find the software to load on to it, there was nothing for the -T version. Any help would be greatly appreciated. Thanks.
ok i got that too flashing a box too connect the digivox T to your computer with the lead that came with the box LEAVE the digivox-t box "OFF" open... DOWNLOADER_10 (on your computer) brouse..FOR the BIN FILE ver3.300 22 DEC 2008 (for mmds aerial) NOW.... turn "ON" the box and as it "LOADS UP" (look at the front of the digivox-box)... PRESS.... DOWNLOAD on the software as the digivox-box "LOADS" now if this fails you will have to try again all you are doing is putting on firmware on the digivox-t thats all another thing its better to use XP than VISTA (bring it to a friends house if you dont have it) thats for flashing PS.... the .bin file is here http://www.4shared.com/dir/3042613/f6e3421c/sharing.html PS... you may have to join to get it So join and re-enter the link just looked up this site for you and a fellow had the same problem it took him 10 attempts so dont lose PATIENCE with it T
