Getting Command Line Error with Nero

I initially got a "Internal Target Error" using Nero which was fixed by lowering the burn speed to 4x from 8x. Now I'm getting a "Command Line Error". Here's the error report. Any help would be appreciated



1K22-*serial number removed by creaky*

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.3.6.0
Internal Version: 8, 3, 6, 0
(Nero Express)
Recorder: <HL-DT-ST DVD-RW GWA-4082N>Version: CB03 - HA 1 TA 0 - 8.3.6.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST DVD-RW GWA-4082N>Version: CB03 - HA 1 TA 0 - 8.3.6.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HTS541060G9SA00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RW GWA-4082N atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD-RW GWA-4082N F: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
BUFE : 0
Physical memory : 503MB (515436kB)
Free physical memory: 123MB (126792kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.5.2009
ISO compilation
14:14:14 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

14:14:14 #2 Text 0 File Isodoc.cpp, Line 6713
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

14:14:14 #3 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

14:14:15 #4 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using DVD media

14:14:15 #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'

14:14:16 #6 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 1971439 (438:05.64, 3850MB)
Last address to be written: 1971439 (438:05.64, 3850MB)

14:14:16 #7 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)

14:14:16 #8 Text 0 File DlgWaitCD.cpp, Line 2948
Recorder: HL-DT-ST DVD-RW GWA-4082N, Media type: DVD-R
Disc Manufacturer ID: <MBI 01> <RG40>
Disc Application Code: 64, Disc Physical Code: 193

14:14:16 #9 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================

14:14:16 #10 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1971440 (1971440) = #1971440/438:5.65
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1971440 blocks [F: HL-DT-ST DVD-RW GWA-4082N]
--------------------------------------------------------------

14:14:16 #11 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [F: HL-DT-ST DVD-RW GWA-4082N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 2 to 2: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4037509120, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 2 | 0 | 0x41 | 0 | 0 | 0x00
0 | 2 | 1 | 0x41 | 1971440 | 0 | 0x00
1971440 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

14:14:17 #12 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

14:14:17 #13 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

14:14:17 #14 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

14:14:17 #15 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.

14:14:17 #16 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

14:14:17 #17 Phase 32 File dlgbrnst.cpp, Line 1767
Simulation started at 8x (11,080 KB/s)

14:14:17 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14:14:17 #19 Text 0 File DVDR.cpp, Line 3297
Recording mode: Sequential Recording Mode

14:14:17 #20 Text 0 File DVDR.cpp, Line 3451
Start write address at LBA 0
DVD high compatibility mode: Yes


....Continued in the next post....

 

14:14:18 #21 Text 0 File Cdrdrv.cpp, Line 10187
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 2114EF h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 0 h
Start PSN of Physical format information blocks in Extra Border Zone: 0 h
Media Specific [16..783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00


14:14:18 #22 SPTI -1066 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0x53 00 00 00 00 00 1E 14 F0 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 10 53 00 00 0C 24 00 00 C0 00 05

14:14:18 #23 Text 0 File DVDR.cpp, Line 3589
Reserved Track size: 1971440 (1E14F0h, 3850MB) -> return code -1066

14:14:18 #24 CDR -1066 File ThreadedTransferInterface.cpp, Line 1680
Invalid field in command
F: HL-DT-ST DVD-RW GWA-4082N

14:14:18 #25 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1680
Could not perform start of Disc-at-once

14:14:18 #26 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 73340800

14:14:18 #27 Phase 34 File dlgbrnst.cpp, Line 1767
Simulation failed at 8x (11,080 KB/s)

14:14:18 #28 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

14:14:19 #29 Text 0 File Cdrdrv.cpp, Line 11450
DriveLocker: UnLockVolume completed

14:14:19 #30 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

Thanks for the tip However, I have burned several DVDs successfully with the burner before the error cropped up.

Anyhow I'll look into getting a new DVD drive.

 

Hey I guess you were right because when I switched back from Moser Baer to Sony which I had been using all along, it worked!

Thanks loads!