1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Please help! Pc bsoding with new sata card repeatedly!

Discussion in 'Building a new PC' started by PlagasX, Jun 12, 2009.

  1. PlagasX

    PlagasX Member

    Joined:
    Mar 15, 2007
    Messages:
    15
    Likes Received:
    0
    Trophy Points:
    11
    Hello, I just recently built my own pc.

    Here is the setup:

    Gigabyte ep45-ud3r mobo
    ATI 4870 512mb
    4gb g-Skill ram
    250gb HD.
    Antec Earthwatts 500wtt


    Now whenever i install this pci Sata card I have here it's a Roswill via 6421 Sata+Raid controller. My computer goes passed POST and just restarts over and over again. When I take the card out it's normal and boots fine.

    Why is this happening??? Is there something I should said in my BIOS??
    I have heard that if you already have onboard SATA it could interfere with your SATA card. Is this True??

    Please HELP! Thanks
     
  2. Vicious88

    Vicious88 Regular member

    Joined:
    Jan 25, 2007
    Messages:
    274
    Likes Received:
    0
    Trophy Points:
    26
    Yes, it is very possible for On-Board Sata and Sata Cards to interfere with each other.

    The only remody that I know of right off the top of my head is to install the card and then Re-Install your OS using the SATA Drivers option (the Windows XP install, for example will prompt you as it's loading up to press a button if you want to load any non-default SATA drivers).

    If you don't already have a SATA Driver disk to go alongside your card, you may want to download that information and burn it to a CD prior to re-installing your OS.

    Additionally, any SATA harddrives you have should have come with SATA driver disks, which you may want to have handy as well.

    Considering you just built the computer, I don't image you have much data to loose by re-installing your OS.
     
  3. sammorris

    sammorris Senior member

    Joined:
    Mar 4, 2004
    Messages:
    33,335
    Likes Received:
    7
    Trophy Points:
    118
    Even if PCI S-ATA cards can interfere with onboard (which I've never heard and bear in mind I use three of them in one of my PCs in conjunction with all the ports on the motherboard at the same time), that wouldn't stop your PC from POSTing.
    Try a different PCI slot to see if it's a bad slot, but if not, it's a faulty card. It wouldn't surprise me if it was. Rosewill stuff is cheap tat.
     
  4. Vicious88

    Vicious88 Regular member

    Joined:
    Jan 25, 2007
    Messages:
    274
    Likes Received:
    0
    Trophy Points:
    26
    If he's getting a Blue Screen of Death (BSOD) it has to be coming from Windows, and NOT the BIOS -- therefore, his computer is POSTing correctly.
     
  5. sammorris

    sammorris Senior member

    Joined:
    Mar 4, 2004
    Messages:
    33,335
    Likes Received:
    7
    Trophy Points:
    118
    Ah yes I see that now, I saw POST and 'restarting over and over' and didn't bother to read the whole message. Did you actually install the drivers in windows or did it start doing this as soon as you plugged it in?
     

Share This Page