xbox 2.3B modchip

I have install a 2.3B modchip in a V1.5 xbox.
The xbox dvd open i install the 2.3B flash close the dvd to install the flash . The screen is blank .
The xbox after 5 mins shuts down. Then i come to boot up the xbox the green flashing light was flash red and green and did not open the dvd .
CAN YOU HELP .....
Thanks William

P.S This 2.3B is the one with no usb pick up....

 

probably a bad flash, burn a new BIOS disc and flash bank 2, make sure you get the BIOS from a good place.

p.s if it is a bad flash, bank 1 is now dead, and if you naker up bank 2, you will need to buy a external programmer.(i can sell ya one lol)

 

Hi thanks Icarbutt can you get me a price for one.
Thanks William....

 

is your chip a pro or lite? The pro should come with the connector to flash from your pc. All you need for this is X2BM from team executer (download from their site).

 

Hi thanks Scottas the modchip is the 2.3b lite and not the pro.

 

try this link. http://www.teamxecuter.com/flashbios.htm , its a good step by step.

 

Hi lcarbutt thanks for all your help and time .
It work. thanks william. p.s.
can you tell me were i can get the evox m7 from.

 

you can get the m7 BIOS from that guide i gave you(says near the top) but i would use the xecuter 4983.06 BIOS if I were you. i will pm you the link again(just in case yo lost the guide)

 

i'm having problems flashing also can u help?

 

Okay I had the exact same problem. I got a bad flash, same chip same things happened. You may need to by a programmer. What size bios did you use?

 

of course I can, im lcarbutt personal message me your email.