User User name Password  
   
Friday 27.11.2009 / 20:26
Search AfterDawn Forums:        In English   Suomeksi   Pĺ svenska
afterdawn.com > forums > consoles > xbox - hardware boot discussion > hotswap can fix xbox with error 13, 14, 16, 20 and 21. hotswap can reinstall xbox's hdd to factory condition. hotswap also install or reinstall softmod files. all dashboard problems go here. a trick to use xboxhdm in hotswap updated 12/12/2006.
Show topics
 
Forums
Forums
Hotswap Can Fix Xbox With Error 13, 14, 16, 20 And 21. Hotswap Can Reinstall Xbox's HDD To Factory Condition. Hotswap Also Install Or Reinstall Softmod Files. All Dashboard Problems Go Here. A Trick To Use Xboxhdm In Hotswap UPDATED 12/12/2006.
  Jump to:
 
Posted Message
leeroy94
Member
_
2. November 2008 @ 09:49 _ Link to this message    Send private message to this user   
ok i just did a 1.6 last night xbox crystal with the xbox hdm 1.9. and the computer i used only had 1 dvd drive hooked up to secondary and i used the primary for the swap and i dont have a hd hook up on the pc ... i just boot from the dvd ... it did take me around 15 times to get it to work ... unplug power to dvd drive on xbox boot pc and press pause break to wait till the xbox gets the correct error once u get error 12 swap and load the xboxhdm .... other than that i dont know ... cuz i got it to work ....
Advertisement
_
__
dummyfile
Newbie
_
2. November 2008 @ 10:25 _ Link to this message    Send private message to this user   
@leeroy94: Thanks for the advice. I'll be out of town until late tonight, but I'll see what I can do then. I'm not sure what crystal is, though. If that's a modchip, I don't have one...just softmodded. Again, thanks!
Moderator
_
2. November 2008 @ 10:30 _ Link to this message    Send private message to this user   
Originally posted by dummyfile:
I'm not sure what crystal is, though.
Here you go -






Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS/WPA ~ Buffalo WHR-G54S. 4node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G v3.1, WRT54G2 v1, WRT54G v5. *** Forum Rules ***
leeroy94
Member
_
2. November 2008 @ 10:40 _ Link to this message    Send private message to this user   
couldnt have said it better myself ! lmao
leeroy94
Member
_
2. November 2008 @ 10:42 _ Link to this message    Send private message to this user   
i still need to know what folder would the eeprom be located in so i can backup to pc for future hd problems.
leeroy94
Member
_
2. November 2008 @ 10:51 _ Link to this message    Send private message to this user   
one more thing .. i dont know what i would do with out the AID disk. I have used it to repair damaged already modded systems and its my fist tool i use after the xbox can read burnt disks. It can format partitions and install varios dashboards ,... i love the AID disk! and when your doing a hd hot swap with xboxhdm the xbox doesnt read the disk your pc rom drive does.
dummyfile
Newbie
_
3. November 2008 @ 11:31 _ Link to this message    Send private message to this user   
I swear no matter what I do, I can't seem to get this damn thing unlocked. Xplorer360 continues to wear me out with "Could not find a FATX drive to open!" What am I doing so differently? I pull the IDE cable when the white Microsoft logo comes up below the X. I've tried it immediately after, waiting until I feel that error is just a second away, etc. I've even unplugged by SATA ROM drives while trying this with the HDD set to master on both the primary and secondary IDE slots.

The only way I can stop being stupid is to know what I'm doing that's stupid in the first place. Thanks for understanding. *sigh*

Dummyfile
leeroy94
Member
_
3. November 2008 @ 14:40 _ Link to this message    Send private message to this user   
i could never get the waqy to work using explorer .... it always gave me errors .... the pc that i use has only IDE cables and i have 1 rom drive on secondary and the primary is just used for connecting the xbox hd after i get an error 12 ... what error code do u get when u unplug the power to the xbox dvd drive and then boot?
dummyfile
Newbie
_
3. November 2008 @ 14:43 _ Link to this message    Send private message to this user   
Right now, I actually have it all set up for error code 12. I've unplugged the IDE and power from the DVD on the Xbox, so 12 it is. When everything is plugged in properly, however, I get error code 21. But yeah...right now it's 12.
dummyfile
Newbie
_
3. November 2008 @ 15:04 _ Link to this message    Send private message to this user   
Okay I'm so sorry to spam this board, but I wanted to give a minor update before anyone hates on me 100%. I finally download a version of Xplorer360 that is actually seeing my files. I'll report back in a bit. I'm going to carefully reread everything to make sure I don't screw the pooch...again.
dummyfile
Newbie
_
3. November 2008 @ 18:52 _ Link to this message    Send private message to this user   
TheReturn: You've written a great guide. Thanks so much!
leeroy94: Thanks so much for actively trying to help someone as Xbox-dense as me.

What I did to get things working:
- Unplugged the DVD to give error code 12 rather than 21.
- Watched the green light on the eject thing, and unplugged the hard drive IDE cable as soon as I saw flashing red.
- Plugged in IDE cable connected to secondary IDE controller.
- Used Xplorer360 0.9 BETA 6 (as no other version worked for me...)
- Deleted everything from all partitions (0-4) after backing up my original stuff.
- Copied over ms-dash-mik3h to Partition 3.
- Copied over 3 blank folders "Cache", "TDATA", and "UDATA" to partition 4.
- Booted up and finally saw beauty.

I have yet to do any of the softmod stuff again and all I see is this MS dash, but things are finally going well again. Just wanted to update you brilliant minds. Thanks once again!
leeroy94
Member
_
3. November 2008 @ 20:59 _ Link to this message    Send private message to this user   
awsome im glad you got it to work ! just make sure to back up your EEPROM some where safe so that in the future if you want to install a bigger hd or your original HD fails you can fix.
dummyfile
Newbie
_
3. November 2008 @ 21:04 _ Link to this message    Send private message to this user   
I thought I had originally told it to when I said backup MS and backup MOD, but alas it didn't. AID, however, got it backed up for me. :o)
leeroy94
Member
_
3. November 2008 @ 21:20 _ Link to this message    Send private message to this user   
yes you can back it up to the HD but you have to FTP the xbox and find the EEPROM file and copy it back to the pc .... it can be used in combination with xboxhdm for making a bigger drive ... im still looking for th exact location of it i have backed it up before but forgot where i found it
anth455
Newbie
_
21. December 2008 @ 00:12 _ Link to this message    Send private message to this user   
Hi I am newbie to the xbox soft mod. does anyone have a copy of the mhackxbox file so i can start my journey to softmod my xbox. I tried 2 sites that had me pay and after i paid the site didn't have the file no more. so any help is appreciated.

thanks
onehanded
Junior Member
_
21. December 2008 @ 08:14 _ Link to this message    Send private message to this user   
Hi everyone
I have a prob with my xbox which I haven't seen on here but I am hoping that someone will know what the problem is.I start up the xbox and flubber comes on for about 3 secs maximum.Then the xbox switches itself off.anyone got any ideas,as I have tried to restore the dash and no joy.
leeroy94
Member
_
21. December 2008 @ 10:48 _ Link to this message    Send private message to this user   
flubber? lol .... does this xbox just keep rebooting? if so u dont have the correct eeprom. what are u using to modd this xbox ... more info is needed
onehanded
Junior Member
_
21. December 2008 @ 11:55 _ Link to this message    Send private message to this user   
Yes what I had done was get an eeprom reader and copy the eeprom to the desktop,as the xbox was showing error 06 sometimes 07 when booting which is to do with the unlocked drive.I then got a hardmodded xbox and tried to re-write the hardmodded xbox eeprom to the cocked up on thinking that if I lock a drive to the hardmodded xbox then when I put the new bigger drive in the f----d up one then it would work.But no I think that I have got it wrong somewhere.
leeroy94
Member
_
22. December 2008 @ 13:33 _ Link to this message    Send private message to this user   
you have more experience then me cus that EEPROM reading looked complicated, I know that when i used xboxhdm to make a bigger hd i has some issues with the xbox rebooting, only to discover that i was using an eeprom from another xbox. If you are only working with 2 units you know that the EEPROM is unique to each xbox right? you cant mix and match, although if your going with a stock xbox HD i beleive you can. I have a xboxhdm disk that i use to mod all my xboxs, then once the xbox is modded i FTP and find the EEPROM and save to my PC , use the same xboxhdm tool and remake the same xboxhdm disk but with the added eeprom and create a new bigger hd, sorry if im gabbing, but i think you said u used another eeprom :)
onehanded
Junior Member
_
22. December 2008 @ 19:02 _ Link to this message    Send private message to this user   
What I did was use the pony program and the reader to actually write the other xboxs eeprom on the broken one.I checked the eeprom when I had read the xbox with the reader again,and it did actually re-write the eeprom,so I figured that if that was the case then I could lock any hardrive with the xbox that I got the eeprom off,as the one I got the eeprom off was a hardmodded xbox,and pop the drive into the re-written xbox but it doesn't work.
onehanded
Junior Member
_
22. December 2008 @ 19:10 _ Link to this message    Send private message to this user   
The reason that I am mentioning this is because I read up on people asking about can you actually re-write the eeprom and it is possible,just that I have 160 gb hd waiting to go in but I still can't get my head around it properly yet.I have done the ps2 recently with 160gb in and I thought that this would be easier with it being microsoft based and being able to put data discs in that the xbox and the p.c can read.The other thing is I know it sounds stupid to some people,but can someone please explain what stock hardrive and virgin xbox is,as videos on youtube show using these items and maybe I am not seeing the wood for the trees.
leeroy94
Member
_
22. December 2008 @ 22:44 _ Link to this message    Send private message to this user   
Stock HD is the original xbox HD, I believe that is 10gb with 8gb accessible to the user. If your modding and just use this drive xboxhdm can back up the eeprom to the drive for u and that's that. I have never heard of a virgin xbox. I have never been able to mod an xbox that has an earlier manufacture date then 2002, all models new than that are fine. I have never seen a ps2 with a HD stock or modded, I have owned a chipped one. If you have the eeprom download xboxhdm from this site, I think you are trying to clone a drive and i fall way short on telling you how. Some drives have locking issues, I beleive that Seagate drives work the best for locking and unlocking. Sorry dude im lost now ....
onehanded
Junior Member
_
23. December 2008 @ 04:08 _ Link to this message    Send private message to this user   
Thanks for your help leeroy I will try the xboxhdm again ,and see how I go and let you know.
MickGrif
Newbie
_
28. December 2008 @ 11:34 _ Link to this message    Send private message to this user   
Hi great guide but I have a couple questions, sorry if there are noobish:
1. Can I play backup games with this mod? And is it poosible to put them onto the xbox hdd or do I have to have them on disc?
2. I cant seem to download the "mhackxbox.rar" file it keeps stopping at 12% done is there any where else I can get it from?

Thanks in advance
Advertisement
_
__
 
_
msmitchel
Newbie
_
18. January 2009 @ 19:20 _ Link to this message    Send private message to this user   
[noob warning]

Ok. So I got more than everything I need to do this. I read umpteen amounts of tuts and I am ready. But the one snag I have is unlocking the xbox HDD and getting it recognized by my pc.

I had to use an older pc cause the one I currently have my HDD runs on sata (4ports) and I have one primary ide channel , which is my cd/dvd drive. i wouldn't know if that would work or not (i'm using xplorer360) so that is why I am using a very old pc with some speed issues. It does not read the dirve at all and I restarted it with the xbox still hooked up to it and on the boot screen it says secondary ide hdd locked enter password 5 left. I take that to mean that it reads it but I did not do the hotswap right to unlock xbox.

I think I might not be getting the timing right. I've tried copying music from a cd and playing it for five minutes then swapping. I tried waiting for the ms logo to appear. I even tried disconnecting the xbox cd/dvd drive to get error 12, and nada. Please anyone help.
Losing mind.

I'm not computer illiterate so I have some general knowlegde to get me through this but it is frustrating that I can't even get the damn thing unlocked.

Can anyone also let me know if I could use my pc that has a hdd that is on a sata channel with one ide port. Meaning that I should just go buy a sata cd dvd drive and then use hdm to do the mod. Disconneting my sata drive and booting the linux cd.

I'm not sure if that older pc is kosher. I have a keyboard that is usb and I can't use it when I boot the linux cd.

I love to talk about nothing, its the only thing I know anything about.

Oscar Wilde
 
Related links
Tired of modchip chat? Talk about the games themselves at our gaming site, Blasteroids.com!
Read our Xbox backup & information package.
 
Related forum topics Posts Last post Forum room
Wireless XBOX 360 Controller on PS3 13 27. November 2009 PS3 - General discussion
Microsoft sued over Xbox 360 memory unit lockdown 28 27. November 2009 News discussion
Facebook app very popular on Xbox 360 6 27. November 2009 News discussion
Modding xbox 360 question... 2 27. November 2009 Xbox 360 - General discussion
I just have xbox 360 with Hitachi 47, i need advice 5 27. November 2009 Xbox 360 - General discussion
WHAT???? RROD on my new XBOX 360? 13 27. November 2009 Xbox 360 - General discussion
Xbox 360 drive problems 4 27. November 2009 Xbox 360 - General discussion
backing up xbox 360 games 1 27. November 2009 Xbox 360 - General discussion
Xbox Live Gold free for the weekend 16 27. November 2009 News discussion
What are the minimum PC system requirements needed to get graphics as good/fast as the Xbox 360's? 10 27. November 2009 Xbox 360 - General discussion

 
afterdawn.com > forums > consoles > xbox - hardware boot discussion > hotswap can fix xbox with error 13, 14, 16, 20 and 21. hotswap can reinstall xbox's hdd to factory condition. hotswap also install or reinstall softmod files. all dashboard problems go here. a trick to use xboxhdm in hotswap updated 12/12/2006.
 

Digital video: AfterDawn.com | AfterDawn Forums
Music: MP3Lizard.com
Gaming: Blasteroids.com | Blasteroids Forums | Compare game prices
Software: Software downloads
Blogs: User profile pages
RSS feeds: AfterDawn.com News | Software updates | AfterDawn Forums
International: AfterDawn in Finnish | AfterDawn in Swedish | download.fi
Navigate: Search | Site map
About us: About AfterDawn Ltd | Advertise on our sites | Rules, Restrictions, Legal disclaimer & Privacy policy
Contact us: Send feedback | Contact our media sales team
 
  © 1999-2009 by AfterDawn Ltd.