Can I just put a new hard drive in my xbox with out backing up the old one??? If i can, what do I need to do to get the new drive to run???? I all ready have the preflashed(x-ecuter2 lite) mod chip in & where do I go from here with putting evox on the drive?? THAX
i recommend getting slayers or firefuckers auto installer. that will sort it all out no probs i used slayers myself
this is how I change a HDD 1.backup your /C and /E folder to your pc 2.make an evox boot disc 3.shove the new HDD in the xbox(no prep needed) 4.connect the ethernet cables to you xbox and pc, put in the boot disc, open up flash fxp, establish a connection to your xbox, click on commands, click RAW commands and send these commands over Formatpath \Device\Harddisk0\Partition1 It will give you a number in the bottm right of the screen (the command box) Then do this RAW command FormatDrive 'the number' Do the same as above for the next few raw commands: Formatpath \Device\Harddisk0\Partition2 FormatDrive 'the number' Formatpath \Device\Harddisk0\Partition6 FormatDrive 'the number' Formatpath \Device\Harddisk0\Partition7 FormatDrive 'the number' MAKE SURE YOU DONT FORGET THE SPACE INBETWEEN FormatDrive AND \Device OR IT WILL NOT WORK. 5.send your /c and /e to your new HDD i know you said you did not want to back-up but i thought i would tell you how i do it(this is easier than editing an evox ini)
