321RIP! DVDXcopy (all versions) RF to Ripper Enabled file patcher

A little file patch that I hacked up this afternoon to enable CSS ripper functionality for the RF versions of DVDXcopy.
It makes the RF version work in the same way that the older non RF versions did, with the added bonus of No "DVD BACKUP" warning screen! Just patch once and go! The patch is permanent (unless you upgrade to another RF version then you will have to patch again!)

Download Here: http://321rip.tripod.com/

How to use: Download the 321RIP.zip file and extract 321rip.exe into your DVDXcopyRF folder. Double click the 321RIP icon, click the Enable Ripper button and Viola! Ripper functions are now enabled.

Thanks for xbadboy2 for bringing the basics of this to my attention.

**Edit 11/06/04.** Version 1.1 (IP)
I have re-written the patch to be a lot more intelligent. So long as you have installed in the standard places it will patch from ANYWHERE on your system. Just "Click and Go!"

[bold]FAQ's PLEASE READ!![/bold]
1: Will this patch work on the non Ripper Free (RF) version and remove the Oh so bloody annoying "DVD Backup" Screen??
Answer: NO! This patch is designed to Re-Enable the ripper in the RF version, which does not have the "DVD Backup" screen. Use 321Gone! for all non RF versions of XCopy Xpress, or (If you can) Upgrade to the RF and patch using 321RIP!

2: Does 321RIP! work on the Platinum and DVD Xtreme RF version??
Answer: Yes 321RIP works on ALL RF versions to date, please remember to download the Xtreme version of 321RIP, else you will get a "Cannot find the file to Patch" error.

3: Can I remove the Ripper after patching??
Answer: Yes. A backup of the file is made before patching. Simply delete the bouducon.dll file and rename the bouducon.bak file to bouducon.dll (Although god knows why you'd want to do that!).

Regards,
Psi
_
_
_
_
_X_X_X_X_X_[small]PsiDOC... Poking the DMCA with a stick, then running away.[/small]

 

PsiDoc: I "must be" out in the twilight zone because i cant get your program to work, so here i am asking for help. First, I am running DVD XCOPY Platinum version 4.0.3.8 (not the rf version) in the "simple" mode. I d/l'd your prog and placed it in c:\321studios\platinum file. Then I did as instructed (double click, etc) and found that the bouducon.dll now became .bak and a new bouducon.dll was in its place. When I attempted to burn a movie (thin red line), i still got the "DVD Backup" screen.
What am I doing wrong?
Also, while I also use DVDShrink and DVDDecryptor (both outstanding programs by the way) I occasionally have to use DVDXCopy but do not want the backup screen.
Any assistance ... even a "long walk off a short pier" would be accepted. Thanks for your help. Jim1812

 

Believe that is for use on the ripper free version not 4.0.3.8 ver. It allows the ripper free version to rip again and the backup screen is not on the RF version. The placement of the original bouducon.dll file allows the RF version to rip as PsiDOC mentioned. It works fine.

 

Wise,
He's already been told. And now 321 fans, to get the new RF download you have to call 321 to get a new license. Should be free as the merchandise was guaranteed to retail purchasers. So have your old purchase and license info ready.
_
_X_X_X_X_X_[small][bold]'brobear'[/bold]

[/small]

 

Do I have to give up my old Lciense after I obtain the new License for the RF?

 

Thanks.

 

Sorry if this has been answered.

Hating the dvd back up screen and wanting the entire disc instead of movie only I quit using DVDx express and started using dvdshrink.

With this new 321 rip I want to go back to DVDX Express but want to make sure it will work with it.

First where is DVDXcopyRF folder located.

When I open up my 321 folder on my c drive I don't see RF anywhere but I do see that bouducon.dll file mentioned in another thread.

Sorry if this has been asked/answered but I wanna try it again w/o making a coaster.

Thanks in advance.

 

In the 321 Studios folder you will find Platinum and Platinum RF if you have both versions and didn't tamper with the download/install locations. For all else check the first post on the thread and follow the instructions at tripod.

_X_X_X_X_X_[small]Criminals love gun control -- it makes their jobs safer.[/small]

 

willthis work with dvdxcopy xpress rp

 

FAQ's PLEASE READ!!
1: Will this patch work on the non Ripper Free (RF) version and remove the Oh so bloody annoying "DVD Backup" Screen??
Answer: NO! This patch is designed to Re-Enable the ripper in the RF version, which does not have the "DVD Backup" screen. Use 321Gone! for all non RF versions of XCopy Xpress, or (If you can) Upgrade to the RF and patch using 321RIP!

2: Does 321RIP! work on the Platinum and DVD Xtreme RF version??
[bold]Answer: Yes 321RIP works on ALL RF versions to date.[/bold]

3: Can I remove the Ripper after patching??
Answer: Yes. a backup of the file is made before patching. Simply delete the bouducon.dll file and rename the bouducon.bak file to bouducon.dll (Although god knows why you'd want to do that!).

_X_X_X_X_X_[small]AMD Duron 1800 Applebred @ 2400 Mhz (200 FSB x 12)
Asus A7N8X-E Deluxe Nvidia N-Force 2
2 x 256 MB 3200 DDR
2 x WD 40 GB
Pioneer DVR106D 1.07 RPC1 with 12x rip firmware
All the usual toys and trimmings to go with the above![/small]

 

how do you download 321rip into the dvdxcopyrf folder sorry but i need step by step instuctions please thanks mr thicko

 

every time i try to open 321rip i get unable to find a file to patch please help thanks

 

Put 31rip.exe in the [bold]SAME[/bold] directory as the bouducon.dll file. This IS usually the C:\Program Files\321StudiosRF\<<Insert version (Platinum or Xpress) here>> directory.
The execute and patch.

 

where do find the directory with bouducon.dll file and how do i access it thanks

 

Look in C:drive > program files > 321Studios > platinum folder.

In Win XP Start > Search > Platinum > C: from the start button on the desktop. Simple to find.

 

found the bouducon.dll file how do i get put 321rip into it thanks

 

PsiDoc
They're asking about you all over the forums. Keep up the work.