i am new to backing up xbox games. i just want clear somethings up.i do have modchip in my box with programs. do you have to save the whole game on the xbox h/drive first before uploading to my pc. my pc has nero, do i need anything else on my pc.and does anyone know anythink about dvd wizard pro . i heard it can copy xbox games. thank you
I think a little research is in order before you embark on the long (well sometimes) road of xbox modding. 1st of all yes you will need a chip. 2nd Wizard pro or anything else for that matter will not work, if you are trying to back up an xbox game withonly your pc. As a BRIEF rundown of what you will need - here is a short list of what you need to do. I urge you to check out seamonkeys guides (found at the top of the backing up page ie sticky topics) and the tutorials at www.xbox-scene.com so you can get some detailed information. 1 - you need a cross over cable for direct pc to xbox exchanges or a network setup. 2 - You need a new dash board for the xbox ie: Evox 3 - assign your xbox a static ip (in evox) which is in the same subnet as your computers 4 - Obtain a ftp program ie: Flash FXP 5 - create a new connection in Flash FXP - name - xbox password - xbox with you xbox's new ip address 6 - Open the connection between your comp and xbox through flash fxp or similar 7 - Open xbox drive, place game in, close xbox drive 8 - Wait 'til its finished reading the disk and then open the D: folder on your xbox through flash fxp or similar 9 - Create a folder on your pc for the game to go. 10- open that folder and copy ALL game data (from the d drive) into the new folder you just created. 11- when its complete (transfers fron d: to pc with a cross over are normally 1.5 meg a sec) patch the .xbe files with a program called qwix availiable from www.xbox-sceen.com - tools 12 - Create an iso from your data with QWIX (or similar) 13 - Burn as image on media suitable for YOUR version xbox 14 - PLAY
