this is what i get (Windows System error)" there is an ip address conflict with another system on the network." i cant manually configure my ip address on internet protocol (tcp/ip) can anyone help?? i mean i try but it doesnt stay when i click on my network connections, and click on the xbox connection; on the right side where it saids Details this is what i get: Local area connection lan or high speed enabled, firewalled realtek rtl8139 family pci fast ethernet nic. ip address:0.0.0.0 subnet mask:0.0.0.0 manually configured. i know i need to change my ip address from 0.0.0.0 to 192.168.100.10 and subnet mask to 255.255.255.0 and this is what i type in default gateway:192.168.100.20 but i get that windows system error thats driving me crazy!! can someone help.? i had my xbox connected to flashfxp before, but i upgrade from evo to firefuckers xdisk 1.01 and thats when all these conflicts started to happen. can some one give me some good advice?thanks _X_X_X_X_X_[small] Halo Special edition Xbox V7 Playstation 2 Plextor px-708A 8xdvd-/+rw.:: Tdk 420n 4dvd+r/rw :.:. Shit Happens When you Party Naked :.:.:.[/small]
k here we go I have a second NIC card so I go in STATIC. Now what i do is make sure my box is set to a static IP 192.168.0.222 Now I go into where my NIC card is in my windows,in control panel(look for it) You will get to it and right click it,there will be a window with a list of hardware....find your NIC card and highlight it and click 'properties' Here is where you will set a static IP Since my xbox IP is 192.168.0.222 I will set my PC IP to one up/down on the last cluster 192.168.0.221 255.255.255.0 192.168.0.10 (these are my settings) Now once this is all done,open flash fxp and set it up likewise the Ip you fill in in flash fxp will be your XBOX IP (192.168.0.222) user-xbox password-xbox now connect. Easy as pie. (I use a crosswire and a second NIC) You can use two cat5's and a hub or router too....this should help ya though.
