Hi so I am new into to this DVD backup, so go easy on me. First sorry about the lost Post but I am a newbie, so don’t know how much info you guys need! Why I am copying (backing up) DVD? I am Spending good money on a DVD's and then I keep Losing (easy when you have over 200+ DVD's) them or getting Scratch I had enough and need a backup, so the originals stays safe. Ok my problem is like to buy new DVD's and that’s were I have the most problems. I was trying to copy this DVD (so you guys to take a piss of the Title) and i keep getting error when the recording is going. I have lost more that 5 DVD-R one this film. But I have backup other DVD's without a problem. I always get a fail now and this error 01:16:19 #27 CDR -1119 File Writer.cpp, Line 301 Track following error 01:16:19 #28 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 01:16:19 #29 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 01:16:19 #30 Text 0 File DVDR.cpp, Line 1743 EndDAO: Last written address was 2527 01:16:19 #31 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 01:16:19 #32 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 01:16:19 #33 Phase 34 File dlgbrnst.cpp, Line 1800 Simulation failed at 2x (2,760 KB/s) Existing drivers: File 'DriversASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02 File 'Driversatapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 23/08/2001 20:00:00 (Adapter driver for rec) Registry Keys: HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogonAllocateCDROMs : 0 (Security Option) There is more of this Log if you need to see it all, let me know. Don’t know what to do! I am the Admin of this PC Running WIN XP I have the full Log if that help. What I do is Backup with DVD Shrink 3.1(latest) and then try Burn with ImgTool(latest). been reading on this forum and notice the way to Burn under Nero, I have try and get the same problem, I have Nero Start Smart but I use Nero 6.3. i have as well this DVD4Free running in the background that charges faces when the DVD is Inserted. I use sometimes RegistryChecker i read somewhere that helps, something about the reg, but I think the problem is on NERO. I have install and uninstall Nero more times that I can think of, I just had HD formatted and started for the beginning and nothing work, I am sure you guys know the problem ;-) I use powerDVDXp to run the movie for a while and they make the backup. If you need anymore info please let me know, i dont know what else to do to make this DVD to run!!! Many Thanks for any Help
ok... try this - download program called CloneDVD - use that in conjunction with dvd43 take both discs wipe them thoroughly with a clean cloth then place them in your comp, turn off yur internet - firewall and antivirus, and dont do anything on your computer at all while it is doing its job open up cloneDVD, and copy the DVD hopefully that WILL work
thanks for the replys but, still doest solve my problem. with DVD clone i can only clone lowgb dvd's not the 7gb ones. regarding DVD Decrypter i wil give it a try.
Use DVD Shrink and DVD Decrypter for great results. I backup up nearly all my DVD's on DVD-RW disks. Managed to find them on sale at a price which is only about 30% more the DVD-R. That way you can re-use them if you decide you no longer want the copy or the backup doesn't work. Haven't had many bad disks (three only) and I was able to return them to the retailer for exchange.
well actually for your information you can backup DVD9's with [bold]CLONEDVD[/bold] not DVD Clone! www.elby.ch learn your facts
Track following error....Your burner is having a difficult time keeping the laser pointed where it ought to be. What kind of media are you using. You say you have burned other discs after burning this one? Normally if there is something wrong with the source disc, you will get an error during the rip portion of the process. It kinda sounds like a burner going bad but if you can burn other movies then that might not be the problem. If there was a problem with the burn programs then you shouldn't be able to burn other movies. It would be VERY helpful to post a complete burn log. We have lots of room here at AD! I know the other folks who answered before me think it's a program problem, I'm thinking it may be a media or burner problem. I could be wrong.
That sounds like a media problem to me also. If the hole in a disc is not in the exact center or is not the correct size or not perfectly round you could get a Track following error. It could be a single bad disc or a whole batch. http://www.nero.com/us/632181809668074.html#5
Dark Blade Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 09:20:56 ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 31/05/2004 11:10:49 Nero version: 6.3.0.0 Recorder: <OPTORITE DVD RW DD0203> Version: 2.09 - HA 1 TA 1 - 6.3.0.0 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <ASUS DVD-ROM E616 >Version: Z.1 - HA 1 TA 0 - 6.3.0.0 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST360020A atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : ASUS DVD-ROM E616 atapi Port 1 ID 0 DMA: On CdRomPeripheral : OPTORITE DVD RW DD0203 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === ASUS DVD-ROM E616 D: CDRom0 OPTORITE DVD RW DD0203 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 767MB (785952kB) Free physical memory: 414MB (424320kB) Memory in use : 46 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.7.2004 UDF/ISO compilation 19:50:04 #1 Phase 112 File dlgbrnst.cpp, Line 1800 DVD-Video files reallocation started 19:50:04 #2 Phase 114 File dlgbrnst.cpp, Line 1800 DVD-Video files reallocation completed (no file modified) 19:50:04 #3 Text 0 File Isodoc.cpp, Line 6029 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 19:50:04 #4 Phase 111 File dlgbrnst.cpp, Line 1800 DVD-Video files sorted 19:50:04 #5 Text 0 File Reader.cpp, Line 118 Reader running 19:50:04 #6 Text 0 File Writer.cpp, Line 124 Writer OPTORITE DVD RW DD0203 running 19:50:04 #7 ISO9660GEN -11 File geniso.cpp, Line 3882 First writeable address = 0 (0x00000000) 19:50:04 #8 ISO9660GEN -11 File geniso.cpp, Line 3882 First writeable address = 0 (0x00000000) 19:50:04 #9 Text 0 File Burncd.cpp, Line 3094 Turn on Disc-at-once, using DVD media 19:50:04 #10 Text 0 File DlgWaitCD.cpp, Line 239 Last possible write address on media: 2297887 (510:38.37) Last address to be written: 2239487 (497:39.62) 19:50:04 #11 Text 0 File DlgWaitCD.cpp, Line 244 Write in overburning mode: FALSE 19:50:04 #12 Text 0 File DlgWaitCD.cpp, Line 2068 Recorder: OPTORITE DVD RW DD0203, Media type: DVD-R Disc Manufacturer: AN31 - Disc Application Code: 64, Disc Physical Code: 193 19:50:04 #13 Text 0 File DlgWaitCD.cpp, Line 405 >>> Protocol of DlgWaitCD activities: <<< ========================================= 19:50:04 #14 Text 0 File ThreadedTransferInterface.cpp, Line 779 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2239488 (2239488) = #2239488/497:39.63 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2239488 blocks [OPTORITE DVD RW DD0203 ] -------------------------------------------------------------- 19:50:04 #15 Text 0 File ThreadedTransferInterface.cpp, Line 948 Prepare recorder [OPTORITE DVD RW DD0203 ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4586471424, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2239488 | lead-out | 1 | 0x00 | 0x41 19:50:05 #16 Phase 24 File dlgbrnst.cpp, Line 1800 Caching of files started 19:50:05 #17 Text 0 File Burncd.cpp, Line 4061 Cache writing successful. 19:50:05 #18 Phase 25 File dlgbrnst.cpp, Line 1800 Caching of files completed 19:50:05 #19 Phase 32 File dlgbrnst.cpp, Line 1800 Simulation started at 2x (2,760 KB/s) 19:50:05 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2264 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 19:50:05 #21 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 13:53,441 (833441ms) -> OK 19:50:05 #22 Text 0 File DVDR.cpp, Line 1424 Recording mode: Sequential Recording Mode 19:50:05 #23 Text 0 File Mmc.cpp, Line 19397 Set BUFE: BURN-Proof -> ON 19:50:05 #24 Text 0 File DVDR.cpp, Line 1539 Start write address at LBA 0 DVD high compatibility mode: Yes 19:50:05 #25 Text 0 File Cdrdrv.cpp, Line 7912 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 19:51:00 #26 SCSI -1119 File Cdrdrv.cpp, Line 1430 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x036B0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x09 Sense Qual: 0x04 CDB Data: 0x2A 0x00 0x00 0x00 0x09 0xE0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x09 0x04 19:51:00 #27 CDR -1119 File Writer.cpp, Line 301 Track following error 19:51:00 #28 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 19:51:00 #29 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 19:51:00 #30 Text 0 File DVDR.cpp, Line 1743 EndDAO: Last written address was 2527 19:51:00 #31 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 19:51:00 #32 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 19:51:00 #33 Phase 34 File dlgbrnst.cpp, Line 1800 Simulation failed at 2x (2,760 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02 File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 11:02:00 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 23/08/2001 20:00:00 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) hi thanks for the help, i still get the same error, like i said before i dont get this error all the time. yesterday i backup Wrong turn and after the 3rd time attept it burn, now i use Simulation so i dont loose more DVD-r. i dont have problems burning other this, Music cds etc. only this Vob files. is there a guide to burn dvd with DVD Decrypter after save Vob with DVD Shrink 3.1. this movie that i am trying to backup is Shanghai Knights and i have try 3x to burn but always get the error. anymore advide would be a bless. regards _X_X_X_X_X_[small](BodyBag You Know It Make Sence)[/small]
Did you try a different brand of disc's? Did you check your burner power connections. Did you try using a cleaning disc on your burner?
You also need to edit your post to remove your Nero registration number. Follow Veblin's advice. Fron your log: Disc Manufacturer: AN31 - Disc Application Code: 64, Disc Physical Code: 193 This is crap media for DVD recording. Get some Ritek G-04 or Verbatim.
Did you try a different brand of disc's? yes Did you check your burner power connections. yes, i have unplug them and plug them back incl motherboard. Did you try using a cleaning disc on your burner? no, what do you recommend is there a brand better than another or all the same, I don’t really trust cleaning cds or tapes Since once I use one to clean my VHS heads and after 1 week the damm VHS got damage. ------------------------------------------------- You also need to edit your post to remove your Nero registration number Sorry never notice that. Fron your log: Disc Manufacturer: AN31 - Disc Application Code: 64, Disc Physical Code: 193 yes this DVD-r were cheat but the ones before (run out of them) were ok. Get some Ritek G-04 or Verbatim yes thanks i have already order Ritek Brand. will let you know, how it turn out. as well i went to Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) and change to 1 not 0, for my suprise i was able to copy the DVD but now its all back to the same cant copy no more. i will try the new DVD-r once they arrive, for now thanks for the Advise and if there is more to add, please do i check this page 2-3 times a day, getiing desperate lol. what about my DVD writter? anygood? or the problems nothing to do with the model, i hear about upgrade firmware how do i do this and will it improve anything, whats the risks?
