im tryin to burn sum .avi onto my cd-rs usin nero but it doesnt work. Heres my log 1A25-0806-7130-1286-1970-7869 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'Crogram FilesAheadNeroWnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero version: 6.3.1.17 (Nero Express) Recorder: <ATAPI CD-RW 40/12/48X> Version: 100C - HA 1 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: < ATAPI 52X CDROM >Version: 1.40 - HA 1 TA 1 - 6.3.1.17 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 53073H6 atapi Port 0 ID 0 DMA: On CdRomPeripheral : ATAPI CD-RW 40/12/48X atapi Port 1 ID 0 DMA: On CdRomPeripheral : ATAPI 52X CDROM atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === ATAPI CD-RW 40/12/48X E: CDRom0 ATAPI 52X CDROM D: CDRom1 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 255MB (261616kB) Free physical memory: 63MB (65036kB) Memory in use : 75 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 29.7.2004 CD-ROM (ISO) 11:30:41 AM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:30:41 AM #2 Phase 72 File dlgbrnst.cpp, Line 1845 BURN-Proof activated 11:30:41 AM #3 Text 0 File Reader.cpp, Line 118 Reader running 11:30:41 AM #4 Text 0 File Writer.cpp, Line 124 Writer ATAPI CD-RW 40/12/48X running 11:30:41 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 11:30:41 AM #6 Text 0 File Burncd.cpp, Line 3172 Turn on Track-at-once, using CD-R/RW media 11:30:41 AM #7 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 359845 ( 79:59.70) Last address to be written: 261057 ( 58:02.57) 11:30:41 AM #8 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 11:30:41 AM #9 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: ATAPI CD-RW 40/12/48X; CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 11:30:41 AM #10 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:30:41 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 261058 (261058) = #261058/58:0.58 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 261056 blocks [ATAPI CD-RW 40/12/48X ] -------------------------------------------------------------- 11:30:41 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [ATAPI CD-RW 40/12/48X ] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 534953984, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 261058 | lead-out | 1 | 0x00 | 0x41 11:30:41 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030 Removed 2 run-out blocks from end of track 1. Length: 261058 -> 261056. 11:30:42 AM #14 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 11:30:42 AM #15 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 11:30:42 AM #16 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 11:30:42 AM #17 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 40x (6,000 KB/s) 11:30:42 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:30:42 AM #19 Text 0 File Mmc.cpp, Line 20401 Set BUFE: BURN-Proof -> ON 11:32:11 AM #20 SCSI -1093 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x07FE0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x6C 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x02 0x00 11:32:11 AM #21 CDR -1093 File Writer.cpp, Line 304 No seek complete 11:32:11 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 11:32:13 AM #23 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 11:32:14 AM #24 CDR -201 File WriterStatus.cpp, Line 196 Invalid write state ATAPI CD-RW 40/12/48XH1 T0 11:32:14 AM #25 TRANSFER -18 File WriterStatus.cpp, Line 196 Could not perform EndTrack 11:32:14 AM #26 Text 0 File Mmc.cpp, Line 15226 <ATAPI CD-RW 40/12/48X > start Close Session 11:32:14 AM #27 SCSI -1176 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x72 0x04 11:32:14 AM #28 CDR -1176 File WriterStatus.cpp, Line 245 Session fixation error 11:32:14 AM #29 TRANSFER -19 File WriterStatus.cpp, Line 245 Could not perform Fixation 11:32:14 AM #30 Text 0 File WriterStatus.cpp, Line 254 falling back to disc fixation 11:32:14 AM #31 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 11:32:14 AM #32 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 40x (6,000 KB/s) Existing drivers: File 'DriversCDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 7/15/2004 11:54:09 PM File 'DriversCDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 7/15/2004 11:54:09 PM File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 7/25/2004 8:22:29 PM File 'DriversPXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 3:02:00 AM (Prassi/Veritas driver for win 2K) File 'Driversatapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 9/15/2001 1:44:22 AM (Adapter driver for rec) Registry Keys: HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogonAllocateCDROMs : 0 (Security Option)
the last time this happen to me is using those philips cdr, none of them work with my burner. have you tried out different brands ? the last thing i wanna say is, if its not the cdr it must be the drive. its b0rked. get a dvd burner, pretty cheap now
well i fixed it lol. i changed the writing speed to 12x and it works fine most of the time. there was this one time where it burned it succelfully but the cd had nothin in it =(
