Hello everyone, can someone help me with these 2 log files? Used media: Philips DVD+R 1-16x --------------------------------------------------------------------- Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2-11-2004 13:54:32 NT-SPTI used Nero Version: 7.2.7.0 Internal Version: 7, 2, 7, 0 (Nero Express) Recorder: <_NEC DVD_RW ND-3550A> Version: 1.06 - HA 1 TA 0 - 7.2.7.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 1 - 7.2.7.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3120022A atapi Port 0 ID 0 DMA: On DiskPeripheral : MAXTOR STM3160812A atapi Port 0 ID 1 DMA: On CdRomPeripheral : _NEC DVD_RW ND-3550A atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === _NEC DVD_RW ND-3550A I: CDRom0 HL-DT-ST DVD-ROM GDR8162B J: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1047916kB) Free physical memory: 466MB (478192kB) Memory in use : 54 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 23.3.2007 Burn DVD Image 23:16:10 #1 Text 0 File ThreadedTransfer.cpp, Line 540 ReadBuffer-Pipe got 262144KB of Memory 23:16:10 #2 Text 0 File Reader.cpp, Line 124 Reader running 23:16:10 #3 Text 0 File Writer.cpp, Line 113 Writer I: _NEC DVD_RW ND-3550A running 23:16:10 #4 Text 0 File Burncd.cpp, Line 3405 Turn on Disc-At-Once, using DVD media 23:16:11 #5 Text 0 File DlgWaitCD.cpp, Line 298 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2091471 (464:46.21, 4084MB) 23:16:11 #6 Text 0 File DlgWaitCD.cpp, Line 310 Write in overburning mode: NO (enabled: CD) 23:16:11 #7 Text 0 File DlgWaitCD.cpp, Line 2842 Recorder: _NEC DVD_RW ND-3550A, Media type: DVD+R 23:16:11 #8 Text 0 File DlgWaitCD.cpp, Line 482 >>> Protocol of DlgWaitCD activities: <<< ========================================= 23:16:11 #9 Text 0 File ThreadedTransferInterface.cpp, Line 848 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2091472 (2091472) = #2091472/464:46.22 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2091472 blocks [I: _NEC DVD_RW ND-3550A] -------------------------------------------------------------- 23:16:11 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1063 Prepare recorder [I: _NEC DVD_RW ND-3550A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4283334656, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2091472 | 2091472 | 0x00 0 | 1 | 1 | 0x41 | 2091472 | 2091472 | 0x00 2091472 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 23:16:11 #11 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 23:16:11 #12 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 23:16:11 #13 Text 0 File Burncd.cpp, Line 4236 Cache writing successful. 23:16:11 #14 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 23:16:11 #15 Phase 28 File dlgbrnst.cpp, Line 1730 Speed measurement started 23:16:11 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2722 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 23:17:15 #17 Text 0 File WriterStatus.cpp, Line 116 <I: _NEC DVD_RW ND-3550A> start writing Lead-Out at LBA 2091472 (1FE9D0h), length 0 blocks 23:17:15 #18 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 23:17:15 #19 Phase 29 File dlgbrnst.cpp, Line 1679 Speed measurement completed: 49.8x (68.784 KB/s) 23:17:15 #20 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 12x (16.620 KB/s) 23:17:15 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2722 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 23:17:15 #22 SPTI -1066 File SCSIPassThrough.cpp, Line 291 I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07 Buffer x053f1e00: Len x804 23:17:15 #23 SPTI -1065 File SCSIPassThrough.cpp, Line 291 I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 23:17:15 #24 SPTI -1065 File SCSIPassThrough.cpp, Line 291 I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xF9 14 01 FF 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 23:17:15 #25 Text 0 File DVDR.cpp, Line 6871 Drive: _NEC DVD_RW ND-3550A Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished with error, return code -1065 23:17:15 #26 Text 0 File DVDR.cpp, Line 6300 Drive: _NEC DVD_RW ND-3550A Book Type request [NEC]: DVD-ROM Changing the Book Type was finished with error, return code -1065 23:17:15 #27 Text 0 File DVDPlusRW.cpp, Line 662 Start write address at LBA 0 DVD high compatibility mode: Yes 23:20:54 #28 SPTI -1135 File SCSIPassThrough.cpp, Line 291 I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 0C B3 80 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C Buffer x04600000: Len x10000 0x02 21 F1 11 24 00 2D 10 0D A6 31 0A F3 5C B0 F3 0x0E C0 E1 3E 24 00 FC A3 2F 1A E3 61 1D D0 CD FC 0x02 45 30 8F 43 00 E0 3C 2F 22 20 DE DF 0F 11 14 23:20:54 #29 CDR -1135 File Writer.cpp, Line 302 Write error I: _NEC DVD_RW ND-3550A 23:20:54 #30 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 23:20:55 #31 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 23:20:55 #32 SPTI -1135 File SCSIPassThrough.cpp, Line 291 I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C 23:20:55 #33 SPTI -1176 File SCSIPassThrough.cpp, Line 291 I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 01 06 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03 23:20:55 #34 CDR -1176 File WriterStatus.cpp, Line 167 Session fixation error I: _NEC DVD_RW ND-3550A 23:20:55 #35 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 23:20:55 #36 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 12x (16.620 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 25-8-2006 4:47:00 File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 25-8-2006 4:47:00 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) --------------------------------------------------------------------------------------- And the 2nd log: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2-11-2004 13:54:32 ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2-11-2004 13:54:32 NT-SPTI used Nero Version: 7.2.7.0 Internal Version: 7, 2, 7, 0 (Nero Express) Recorder: <_NEC DVD_RW ND-3550A> Version: 1.06 - HA 1 TA 0 - 7.2.7.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 1 - 7.2.7.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3120022A atapi Port 0 ID 0 DMA: On DiskPeripheral : MAXTOR STM3160812A atapi Port 0 ID 1 DMA: On CdRomPeripheral : _NEC DVD_RW ND-3550A atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === _NEC DVD_RW ND-3550A I: CDRom0 HL-DT-ST DVD-ROM GDR8162B J: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (83886080) Byte BUFE : 0 Physical memory : 1023MB (1047916kB) Free physical memory: 614MB (629496kB) Memory in use : 39 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.3.2007 Burn DVD Image 16:17:35 #1 Text 0 File ThreadedTransfer.cpp, Line 540 ReadBuffer-Pipe got 81920KB of Memory 16:17:35 #2 Text 0 File Reader.cpp, Line 124 Reader running 16:17:35 #3 Text 0 File Writer.cpp, Line 113 Writer I: _NEC DVD_RW ND-3550A running 16:17:36 #4 Text 0 File Burncd.cpp, Line 3405 Turn on Disc-At-Once, using DVD media 16:17:36 #5 Text 0 File DlgWaitCD.cpp, Line 298 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2091471 (464:46.21, 4084MB) 16:17:36 #6 Text 0 File DlgWaitCD.cpp, Line 310 Write in overburning mode: NO (enabled: CD) 16:17:36 #7 Text 0 File DlgWaitCD.cpp, Line 2842 Recorder: _NEC DVD_RW ND-3550A, Media type: DVD+R 16:17:36 #8 Text 0 File DlgWaitCD.cpp, Line 482 >>> Protocol of DlgWaitCD activities: <<< ========================================= 16:17:36 #9 Text 0 File ThreadedTransferInterface.cpp, Line 848 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2091472 (2091472) = #2091472/464:46.22 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2091472 blocks [I: _NEC DVD_RW ND-3550A] -------------------------------------------------------------- 16:17:36 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1063 Prepare recorder [I: _NEC DVD_RW ND-3550A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4283334656, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2091472 | 2091472 | 0x00 0 | 1 | 1 | 0x41 | 2091472 | 2091472 | 0x00 2091472 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 16:17:36 #11 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 16:17:36 #12 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 16:17:36 #13 Text 0 File Burncd.cpp, Line 4236 Cache writing successful. 16:17:36 #14 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 16:17:36 #15 Phase 28 File dlgbrnst.cpp, Line 1730 Speed measurement started 16:17:36 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2722 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 16:18:43 #17 Text 0 File WriterStatus.cpp, Line 116 <I: _NEC DVD_RW ND-3550A> start writing Lead-Out at LBA 2091472 (1FE9D0h), length 0 blocks 16:18:43 #18 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 16:18:43 #19 Phase 29 File dlgbrnst.cpp, Line 1679 Speed measurement completed: 46,1x (63.648 KB/s) 16:18:43 #20 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5.540 KB/s) 16:18:43 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2722 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 16:18:43 #22 SPTI -1066 File SCSIPassThrough.cpp, Line 291 I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07 Buffer x05391e00: Len x804 16:18:43 #23 SPTI -1065 File SCSIPassThrough.cpp, Line 291 I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 16:18:43 #24 SPTI -1065 File SCSIPassThrough.cpp, Line 291 I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xF9 14 01 FF 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 16:18:43 #25 Text 0 File DVDR.cpp, Line 6871 Drive: _NEC DVD_RW ND-3550A Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished with error, return code -1065 16:18:43 #26 Text 0 File DVDR.cpp, Line 6300 Drive: _NEC DVD_RW ND-3550A Book Type request [NEC]: DVD-ROM Changing the Book Type was finished with error, return code -1065 16:18:43 #27 Text 0 File DVDPlusRW.cpp, Line 662 Start write address at LBA 0 DVD high compatibility mode: Yes 16:19:14 #28 SPTI -1106 File SCSIPassThrough.cpp, Line 291 I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03 Buffer x049e0000: Len x10000 0x4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 0x4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 0x4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 16:19:14 #29 CDR -1106 File Writer.cpp, Line 302 Power calibration error I: _NEC DVD_RW ND-3550A 16:19:14 #30 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 16:19:15 #31 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 16:19:15 #32 Phase 127 File dlgbrnst.cpp, Line 1730 Generating DVD high compatibility borders 16:19:15 #33 Phase 129 File dlgbrnst.cpp, Line 1730 Generating DVD borders completed successfully 16:19:15 #34 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 4x (5.540 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 25-8-2006 4:47:00 File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 25-8-2006 4:47:00 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ------------------------------------------------------------------- When i use dvddycrypter set at 4x burn speed than initially the speed fluctuates between 0,5x and 3,5x...after some minutes goes at 4x only to drop back to 1x or 2x than picking up to 4x again. Most common toaster reasons last week: power calibration error 10x session fixation error 5x Something to do with the burner? Had a clean install of winxp yesterday but still threw away 5 dvd's today. Why is the change bookmark unsuccessfull? Thanx.
Logs look OK, cant say you are using good quality media, try Verbatim or Sony (made in Japan). Try updating your Nero from here http://www.filehippo.com/download_nero_7_premium/?1881
Thank you for the reply! I have burned 100+ philips dvd's already without much problems. Going to order some new dvd´s, will take your advice and go with verbatim or sony. Will let you know if this sorts it, if not i'll post another log
Back again... 2 burned verbatims with 50% succes. Here´s the other 50% _--------------------------------------- Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.8.5.0 Internal Version: 7, 8, 5, 0 (Nero Express) Recorder: <_NEC DVD_RW ND-3550A> Version: 1.06 - HA 1 TA 0 - 7.8.5.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 1 - 7.8.5.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3120022A atapi Port 0 ID 0 DMA: On DiskPeripheral : MAXTOR STM3160812A atapi Port 0 ID 1 DMA: On CdRomPeripheral : _NEC DVD_RW ND-3550A atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === _NEC DVD_RW ND-3550A I: CDRom0 HL-DT-ST DVD-ROM GDR8162B J: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1047916kB) Free physical memory: 611MB (626296kB) Memory in use : 40 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 28.3.2007 Burn DVD Image 22:21:57 #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 22:21:57 #2 Text 0 File Burncd.cpp, Line 3499 Turn on Disc-At-Once, using DVD media 22:21:57 #3 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1730143 (384:28.43, 3379MB) 22:21:57 #4 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 22:21:57 #5 Text 0 File DlgWaitCD.cpp, Line 2949 Recorder: _NEC DVD_RW ND-3550A, Media type: DVD+R 22:21:57 #6 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 22:21:57 #7 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 1730144 (1730144) = #1730144/384:28.44 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1730144 blocks [I: _NEC DVD_RW ND-3550A] -------------------------------------------------------------- 22:21:57 #8 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [I: _NEC DVD_RW ND-3550A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3543334912, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 1730144 | 1730144 | 0x00 1730144 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 22:21:57 #9 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 22:21:57 #10 Text 0 File Burncd.cpp, Line 4278 Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB) 22:21:57 #11 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 22:21:57 #12 Text 0 File Burncd.cpp, Line 4397 Cache writing successful. 22:21:57 #13 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 22:21:57 #14 Phase 28 File dlgbrnst.cpp, Line 1762 Speed measurement started 22:21:57 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 22:21:57 #16 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 590400 22:24:06 #17 Text 0 File WriterStatus.cpp, Line 113 <I: _NEC DVD_RW ND-3550A> start writing Lead-Out at LBA 1730144 (1A6660h), length 0 blocks 22:24:06 #18 Phase 29 File dlgbrnst.cpp, Line 1711 Speed measurement completed: 19.4x (26.866 KB/s) 22:24:06 #19 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 4x (5.540 KB/s) 22:24:06 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 22:24:06 #21 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07 Buffer x05f41100: Len x804 22:24:06 #22 SPTI -1065 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 22:24:06 #23 SPTI -1065 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xF9 14 01 FF 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 22:24:06 #24 Text 0 File DVDR.cpp, Line 7281 Drive: _NEC DVD_RW ND-3550A Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished with error, return code -1065 22:24:06 #25 Text 0 File DVDR.cpp, Line 6662 Drive: _NEC DVD_RW ND-3550A Book Type request [NEC]: DVD-ROM Changing the Book Type was finished with error, return code -1065 22:24:07 #26 Text 0 File DVDPlusRW.cpp, Line 674 Start write address at LBA 0 DVD high compatibility mode: Yes 22:24:07 #27 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 22:24:34 #28 SPTI -1106 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03 Buffer x07720040: Len x10000 0x1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 0x1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 0x1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 22:24:34 #29 CDR -1106 File Writer.cpp, Line 303 Power calibration error I: _NEC DVD_RW ND-3550A 22:24:35 #30 Phase 127 File dlgbrnst.cpp, Line 1762 Generating DVD high compatibility borders 22:24:35 #31 Text 0 File DVDPlusRW.cpp, Line 934 EndDAO: Last written address 0 22:24:35 #32 Phase 129 File dlgbrnst.cpp, Line 1762 Generating DVD borders completed successfully 22:24:35 #33 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 4x (5.540 KB/s) 22:24:35 #34 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 22:24:39 #35 Text 0 File Cdrdrv.cpp, Line 11214 DriveLocker: UnLockVolume completed 22:24:39 #36 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Afraid to try a dual layerd dvd with this success rate
Sorry about the double posting but i can only find a edit thread title button, not edit message. Maybe i need some glasses Just installed wnaspi32.dll into my system32 folder and into program files blabla\Core\... will that help?
the eidt button, is at the top right of the post next to (Link to this Message) r u using 16x verbs? if so those are made to be burnt at higher speed, try 8x, BTW, for burning DL disks i would recommend IMGburn which IMO is much better than nero at handling the layer break. although right now IMGburn website is down, so u have to wait awhile to DL it.
Thank you for the info! And yes started using them verbs just this week. The philips dvd's worked pretty good up untill half way through my spindle, did have an occasional coaster now and then but this was just like 7 or 8 in a row before succesfull burn. Should have checked this forum earlier, i ordered philips dvd+r dl about 1,5 week ago and i can't get nero or dvd decrypter to burn anything on them. Well first 2 out of 5...and those dl's don't come cheap I must say that i get more coasters when i burned at 4x still using philips dvd+r dvd's. And for pointing out where the edit button is located. Stupid me, i only looked everywhere on the page looking for the edit text, not realising it's a button w00t! Also thank you for the heads up about IMGBurn, i will definately look into that. It will be almost a week before i get the dual layers so that should give me enough time to figure things out! Guess i could practice some with the 3 remaining philips dl's Will check back here in case of problems
I see you decided to upgrade to 7.8.5.0.....I am currently using 7.5.9.0 (the one in the link provided) with NO problems to date...I am not too keen to upgrade to the newer versions, quite a few logs submitted containing errors.
Yes, i still had the installer sitting on my hd so went with that one. I'll give that one or two more chances and see if there still are problems, i thought newer is better Gonna try imgburn first, didn't even know this was from the person who made dvddycypter.