1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Addition of New DVD Burner

Discussion in 'DVDR' started by rilke, Apr 18, 2005.

  1. rilke

    rilke Member

    Joined:
    Jul 10, 2004
    Messages:
    14
    Likes Received:
    0
    Trophy Points:
    11
    Presently I have a Sony 510DRU burner (internal) installed and use
    DVD X Copy Platium to burn DVDs. Given the limitation of the Sony
    to burn only at 4X speed, I've purchased a Plextor 716UF external
    burner that I wish to install on the same computer and The CloneDVD/AnyDVD package without removing the Sony burner/DVD X Copy
    program. Question! Would a conflict occur with both burners installed on the same computer.

    Thanks!
     
  2. spacedust

    spacedust Regular member

    Joined:
    Jan 31, 2005
    Messages:
    365
    Likes Received:
    0
    Trophy Points:
    26
    It should work fine, as long as you have jumpers for master and slave set correctly on drives. With SATA there are none. Not noing your IDE configuration you may have to have a longer cable.


    Good Luck

    Spacedust
     
  3. bbmayo

    bbmayo Active member

    Joined:
    Oct 31, 2004
    Messages:
    5,088
    Likes Received:
    0
    Trophy Points:
    96
    I imagine this is USB? There should be no problems just be sure you have an USB 2.0 port to plug it into. Windows should recognize and load it right away. :)
     

Share This Page