1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

backup copy of nba vol3

Discussion in 'PS2 - DVD backup discussion' started by pymalake, Feb 14, 2005.

  1. pymalake

    pymalake Member

    Joined:
    Feb 14, 2005
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    11
    I am trying to backup this up. I usually use Games Xcopy but this game is too large. I don't know much about bin files or iso but am willing to try to learn. Anyone know what I should do? I have downloaded isobuster but when I get to the part that says convert extracted files into 2 bin files I am lost. Thanks
     
  2. dragulaAC

    dragulaAC Active member

    Joined:
    Jul 28, 2003
    Messages:
    1,062
    Likes Received:
    0
    Trophy Points:
    66
    Use Dvd decrpyter to both read the ps2 game onto your computer hdd as an .iso image file and then write it to disc as well. Simple program, works great.
     
  3. ryu4000

    ryu4000 Member

    Joined:
    Jan 18, 2005
    Messages:
    45
    Likes Received:
    0
    Trophy Points:
    16
    theres two choice rebuild the image are patch it if you wanna rebuild i will post back later
     
  4. gunit3q5

    gunit3q5 Member

    Joined:
    Feb 14, 2005
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    11
    hook us up with the patch i need it..
     
  5. pymalake

    pymalake Member

    Joined:
    Feb 14, 2005
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    11
    yes please tell me how to rebuild the image. thnx.
     
  6. ryu4000

    ryu4000 Member

    Joined:
    Jan 18, 2005
    Messages:
    45
    Likes Received:
    0
    Trophy Points:
    16
    This is for the people usuing swap magic that have the game freeze on loading screen. Took a while and some reading but finally got it to work. Credit due to all original people not me.

    first you need to download dvddvd gen 1.50 (NOTE YOU MUST HAVE 1.50 not 1.2)
    go to http://www.exploitstation.com/
    register and go back to home page
    log in and click Downloads
    click images (under PS2)
    download cd-dvd gen 1.50+iso builder


    OPEN ISO

    1) Mount ptc-nbasv3 ISO(the ISO file you downloaded from TB) with daemon tools.
    2) Use ISObuster(need to download if you dont have this program) to view the ISO image
    3) Make a new folder on your desktop and extract all the files from the ISO to this new folder
    4) MAKE SURE TO KEEP ISOBUSTER OPEN AFTER YOU EXTRACT FILES. You need to keep ISObuster open so that you can view the original order of the files on the ISO

    CDDVDGEN (directory tab)

    1) Open CDDVDGEN 1.50 that you downloaded earlier
    2) Select create new project - press ok
    3) Select DVD-ROM master disk - press ok
    4) Make sure the "Directory Tab is selected" and Drag the files you extracted earlier onto CDDVDGEN ** Very important to drag them in the same order as ISObuser has them listed. (this is why i told you to keep ISOBuster open)

    Your layout from top to bottom should look like this:
    XF
    DATABASE
    CSSCRIPTS .. etc


    CDDVDGEN (Volume tab)

    5) After you have moved all the files from "New folder" to directory tab, Select tab VOLUME
    6) In the Disk name field type SLUS
    7) in the second Disk name field type the numbers 21126
    8) in producer name field type PLAYSTATION
    9) in license area field select AMERICA


    CDDVDGEN (Record tab)

    10) Next click the record tab
    11) YOU WILL GET 2 ERRORS, JUST CLICK OK
    12) Save as NBA to your desktop
    13) A new window will pop up after the errors called cd/dvd rom recording. Click file ---> export image
    14) name NBAsv3 and it will start to create image files
    15) when its done you will have 3 new files = nbasv3.000, nbasv3.001, nbasv3.002 (also will create a .lst file) *also note for me i had a nbasv3.000 , nbasv3.002 and anotehr nbasv3 file. on the third file if you right click and select properties it will say nbasv3.001

    CDDVDGEN ISOBUILDER

    1) open up cddvdgen iso builder
    2) select files and navigate to the .000 file (then repeat for file .001, and .002)
    3) after the 3 files are in the list , select destination for new image and click build.
    4) wait a few mins and then burn new ISO
     
  7. pymalake

    pymalake Member

    Joined:
    Feb 14, 2005
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    11
    I DOWNLOADED THE PROGRAM FROM THE LINK YOU PROVIDED BUT AFTER IT WAS UNZIPPED THE ISO PROGRAM WAS 1.5 BUT THE CDDVDGEN WAS 1.2 SO I COULD NOT CREATE NEW PROJECT OR ANY THING ELSE IN IT. IS THERE ANOTHER SITE TO DOWNLOAD FROM? THNX VERY MUCH
     
  8. gulliver

    gulliver Regular member

    Joined:
    Feb 12, 2005
    Messages:
    288
    Likes Received:
    0
    Trophy Points:
    26
    I just burned NBA bol.3 successfully the other day and here how to do it. You don't need CDVDGEN 1.50; I have ISOBuster 1.7 and CDVDGEN 1.20 and it worked perfect.

    [bold]Follow These Instruction And You'll Be Fine:[/bold]

    YOU MUST HAVE DVD Decrypter, CDVDGEN, AND ISOBUSTER INSTALLED ON YOUR COMPUTER.

    1) COPY THE PS2 GAME DVD TO YOUR HARD DRIVE AS AN ISO IMAGE.
    a)OPEN DVD Decrypter.
    b)IN THE DESTINATION AREA, CLICK ON THE FOLDER ICON TO CHOOSE BOTH A NAME AND A STORAGE LOCATION FOR THE ISO IMAGE.
    c)CLICK ON MODE > ISO > READ.
    d)CLICK ON THE DVD ICON TO START THE PROCESS.
    e)WAIT UNTIL THE PROCESS IS FINISHED THEN CLOSE DECRYPTER AND GO TO STEP 2.

    2) EXTRACT THE FILES FROM THE ISO IMAGE.
    a) CREATE A NEW FOLDER ON YOUR HARD DRIVE TO STORE THE
    EXTRACTED FILES.
    b) OPEN ISO BUSTER AND CLICK ON FILE > OPEN IMAGE FILE.
    c) NAVIGATE TO THE ISO FILE CREATED IN STEP 1 AND CLICK ON “OPEN”.
    d) HOLD THE CONTROL KEY ON YOUR KEYBOARD AND LEFT CLICK
    EVERY FILE AND FOLDER IN THE LIST.
    e) ONCE ALL THE FILES ARE HIGHLIGHTED, RIGHT CLICK ON ONE OF THEM AND CLICK ON “EXTRACT OBJECTS”.
    f) NAVIGATE TO THE NEW FOLDER THAT YOU CREATED ON YOUR
    HARD DRIVE AND CLICK “OK”.
    g) WAIT FOR THE PROCESS TO FINISH THEN CLOSE ISOBUSTER.

    3) CONVERT THE EXTRACTED FILES INTO 2 BIN FILES.

    a) OPEN CDVDGEN.
    b) SELECT “CREATE NEW PROJECT” AND THEN SELECT “DVD-ROM
    MASTER DISC”. DRAG CDVDGEN TO THE LEFT SIDE OF YOUR
    SCREEN.
    c) NAVIGATE TO THE FOLDER THAT YOU CREATED ON YOUR HARD
    DRIVE BACK IN STEP 2 AND OPEN IT ON THE RIGHT SIDE OF YOUR SCREEN.
    d) SET THE WIDTH OF THAT WINDOW SO THAT IT IS ONLY 1 FILE WIDE. THIS WILL PLACE THE FILES INTO THE SAME ORDER AS THEY WERE ON THE GAME DISK BUT YOU SHOULD CHECK THEM FOR CORRECT ORDER JUST IN CASE.
    e) CLICK ON EDIT > SELECT ALL.
    f) DRAG ALL THE FILES INTO THE RIGHT SIDE OF CDVDGEN.
    g) LOOK FOR A SLUS OR SLES FILE AND WRITE DOWN THE FULL NAME AND THEN CLICK ON THE “VOLUME” TAB IN CDVDGEN.
    h)TYPE SLUS OR SLES (WHICHEVER YOUR FILE NAME IS) INTO THE 1ST BOX NEAR "DISC NAME"
    i) TYPE ALL OF THE NUMBERS FROM YOUR FILE NAME, WITHOUT THE PERIOD, INTO THE 2ND BOX.
    j) TYPE PLAYSTATION FOR THE PRODUCER NAME AND SELECT THE APPROPRIATE LICENSE AREA.
    k)CLICK ON "REC...".
    l)SELECT YOUR DESIRED STORAGE LOCATION AND NAME THE FILE STAR.IML
    m)YOU WILL GET 2 ERRORS, JUST CLICK OK FOR BOTH.
    n)THE RECORDING SCREEN WILL POP UP, CLICK ON FILE > EXPORT IMAGE AND SAVE IT ON ONE OF YOUR HARD DRIVES (NOT IN A FOLDER) NAME IT STAR.LST
    o) WHEN IT'S FINISHED, YOU WILL HAVE 2 FILES NAMED STAR.000 AND STAR.001
    p)CLOSE CDVDGEN AND GO TO STEP 4.

    4) MERGE THE .000 AND .001 FILES INTO A SINGLE ISO IMAGE.
    THE EASIEST WAY TO MERGE THE FILES IS FROM A COMMAND SCREEN.
    YOU WON'T HAVE TO INSTALL AN EXTRA PROGRAM THAT MAY NEED
    EXTRA FILES TO WORK AND COME ON, ADMIT IT, DOS IS SO MUCH FUN!!
    a)CLICK THE WINDOWS START BUTTON AND CLICK ON RUN.
    b)TYPE CMD IN THE BOX AND HIT ENTER.
    c)CHANGE THE DIRECTORY TO MATCH WHERE YOUR STAR.000 AND STAR.001
    FILES ARE STORED.
    EXAMPLE- IF THEY ARE ON THE C DRIVE, TYPE CD C:\ AND HIT ENTER.
    IF THEY ARE ON ANOTHER DRIVE, TYPE THE DRIVE LETTER WITH A COLON AND HIT ENTER.
    d)ONCE YOU HAVE THE CORRECT DIRECTORY-
    TYPE COPY/B STAR.000 + STAR.001 STAR.ISO AND THEN HIT ENTER.
    e)WHEN IT'S FINISHED YOU WILL HAVE A NEW ISO IMAGE NAMED STAR.ISO THAT YOU CAN NOW BURN IN STEP 5.

    5) BURN THE NEW ISO IMAGE ONTO A BLANK DVD.
    USE YOUR FAVORITE DVD BURNING UTILITY TO BURN IT AT THE
    SLOWEST SPEED.

    -----thanks to Winning11 for these instructions
     
    Last edited: Feb 15, 2005
  9. warr1979

    warr1979 Member

    Joined:
    Sep 14, 2004
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    pymalake if you have nero its one two three
     
  10. Solid_Snk

    Solid_Snk Member

    Joined:
    Feb 15, 2005
    Messages:
    9
    Likes Received:
    0
    Trophy Points:
    11
    When i try to patch my rebuilt NBA street v3 and my non rebuilt NBA Street V3 this is what i get.

    Splitoff v1.0 for Win32 (c) 2002 by Digix
    Error: File ptc-nbasv3.iso couldn't opened

    Splitoff v1.0 for Win32 (c) 2002 by Digix
    Error: File ptc-nbasv3.iso couldn't opened

    Splitoff v1.0 for Win32 (c) 2002 by Digix
    Error: File ptc-nbasv3.iso couldn't opened
    Invalid data - DRK-NBA.ISO
    0 file(s) copied
    File not found
    File not found
    File not found
    ApplyPPF v3.0 by =Icarus/Paradox= Nov 26 2001
    Error: cannot open file 'DRK-NBA.ISO': No such file or directory
    SFV/CON v1.6 (Win9x/NT/2000)
    (C) 2001 seaw0lf (www.amok.am)

    [+] Looking for SFV files...
    │ 1 file(s) found.
    │
    [=] DRK-NBA.SFV
    │
    │ [ 1/ 1] DRK-NBA.iso ............................................ MISS
    │
    └─ Completed.
    1 file missing.

    _______________________________________________________________________
    DONE! by DVDRick
    #PS2NOMOD
    Strike any key when ready...



    When i "strike any key" it just closes and nothing happens. I tried to burn the iso still and when i try to load it i get the red border. Can anyone help me or give me a tutorial of how to use the patch. Any help much appreciated. Also i dont have file names ptc-nbasv3.iso. i tried renaming the file by this name but it made no difference. Thanks in advance. Robbie
     
  11. fsfd1

    fsfd1 Member

    Joined:
    Sep 15, 2004
    Messages:
    47
    Likes Received:
    0
    Trophy Points:
    16
    just use dvd decrypter and dragthe iso file in and burn at lowest speed works every time for me
     
  12. Solid_Snk

    Solid_Snk Member

    Joined:
    Feb 15, 2005
    Messages:
    9
    Likes Received:
    0
    Trophy Points:
    11
    the rebuilt one or the one straight from the dvd?
     

Share This Page