1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Burn Error

Discussion in 'DVD Shrink forum' started by kwmj, Mar 18, 2007.

  1. kwmj

    kwmj Member

    Joined:
    Mar 18, 2007
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    11
    I have been trying to work out a problem that I have with copying DVD's using DVD Shrink & Nero. I started with the File Allocation Error and corrected that following some advice I had found in the forums. Now I am getting the Burn Error message. I have tried everything that I could find in the forums, such as making sure that Nero is current, checking the DMA, ASPI, Firmware and ATA/ATAPI Controller drivers and more. Still no luck at this point.

    I am hoping to get this worked out, so I am hoping someone may be able to find an issue I've not worked out yet. Here is the report that comes up with the Burn Error message. Thanks in advance.


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero API version: 7.5.9.0
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Nero\Nero 7\Core\
    Application: ahead\Nero - Burning Rom
    Internal Version: 7, 5, 9, 0

    Recorder: <HP DVD Writer 840b> Version: HJ86 - HA 1 TA 0 - 7.5.9.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6L300S0 iaStor Port 0 ID 0 DMA: On
    DiskPeripheral : WDC WD3200KS-00PFB0 iaStor Port 0 ID 1 DMA: Off
    CdRomPeripheral : HP DVD Writer 840b atapi Port 1 ID 0 DMA: Off
    CdRomPeripheral : IDE-DVD DROM6216 atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HP DVD Writer 840b F: CDRom0
    IDE-DVD DROM6216 G: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 2047MB (2097151kB)
    Free physical memory: 2047MB (2097151kB)
    Memory in use : 16 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    18.3.2007
    NeroAPI
    9:38:08 PM #1 Phase 112 File APIProgress.cpp, Line 282
    DVD-Video files reallocation started

    9:38:08 PM #2 Phase 114 File APIProgress.cpp, Line 282
    DVD-Video files reallocation completed (no file modified)

    9:38:08 PM #3 Phase 111 File APIProgress.cpp, Line 282
    DVD-Video files sorted

    9:38:08 PM #4 Text 0 File SCSIPTICommands.cpp, Line 411
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    9:38:08 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 838
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    9:38:08 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3332
    First writeable address = 0 (0x00000000)

    9:38:08 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3332
    First writeable address = 0 (0x00000000)

    9:38:08 PM #8 Text 0 File Burncd.cpp, Line 3451
    Turn on Disc-At-Once, using DVD media

    9:38:08 PM #9 Text 0 File DlgWaitCD.cpp, Line 306
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 1957167 (434:55.42, 3822MB)

    9:38:08 PM #10 Text 0 File DlgWaitCD.cpp, Line 318
    Write in overburning mode: NO

    9:38:08 PM #11 Text 0 File DlgWaitCD.cpp, Line 2903
    Recorder: HP DVD Writer 840b, Media type: DVD+R
    Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 3

    9:38:08 PM #12 Text 0 File DlgWaitCD.cpp, Line 490
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:38:08 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 821
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1957168 (1957168) = #1957168/434:55.43
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1957168 blocks [F: HP DVD Writer 840b]
    --------------------------------------------------------------

    9:38:08 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1024
    Prepare [F: HP DVD Writer 840b] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4008280064, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 1957168 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 1957168 | 0 | 0x00
    1957168 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    9:38:08 PM #15 Text 0 File SCSIPTICommands.cpp, Line 209
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    9:38:08 PM #16 Phase 24 File APIProgress.cpp, Line 282
    Caching of files started

    9:38:08 PM #17 Text 0 File Burncd.cpp, Line 4278
    Cache writing successful.

    9:38:08 PM #18 Phase 25 File APIProgress.cpp, Line 282
    Caching of files completed

    9:38:08 PM #19 Phase 36 File APIProgress.cpp, Line 282
    Burn process started at 4x (5,540 KB/s)

    9:38:08 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2743
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    9:38:08 PM #21 Text 0 File Cdrdrv.cpp, Line 9234
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: CMC.MAG.
    Media type ID: E01
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8
    23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    9:38:08 PM #22 Text 0 File DVDPlusRW.cpp, Line 674
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:38:32 PM #23 SPTI -1135 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x80
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
    Buffer x06520040: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    9:38:32 PM #24 CDR -1135 File Writer.cpp, Line 299
    Write error
    F: HP DVD Writer 840b

    9:38:32 PM #25 Phase 127 File APIProgress.cpp, Line 282
    Generating DVD high compatibility borders

    9:38:32 PM #26 Phase 129 File APIProgress.cpp, Line 282
    Generating DVD borders completed successfully

    9:38:32 PM #27 Phase 38 File APIProgress.cpp, Line 282
    Burn process failed at 4x (5,540 KB/s)

    9:38:32 PM #28 Text 0 File AudioCompilationImpl.cpp, Line 863
    DRM: DRM burn session terminated.

    9:38:32 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 892
    DRM: Closing entire DRM handling. Bye.

    9:38:32 PM #30 Text 0 File SCSIPTICommands.cpp, Line 254
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    9:38:39 PM #31 Text 0 File Cdrdrv.cpp, Line 10467
    DriveLocker: UnLockVolume completed

    9:38:39 PM #32 Text 0 File SCSIPTICommands.cpp, Line 411
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 10/4/2006 10:42:42 PM
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
    File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 9/27/2006 5:53:22 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  2. Illusenia

    Illusenia Member

    Joined:
    Jul 5, 2005
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    16
    Your burner is in PIO mode so you'll need to get it back in DMA mode.

    Right click on my computer. Go to properties then hardware then device manager.
    Click the + next to ata/atapi ide controller.
    Right click on the secondary ide channel and pick uninstall.
    Now reboot - windows should put the drive back in DMA mode.

    Do the same thing for primary ide chanell - one of your hard drives looks like it's in PIO mode also.


    CMC discs - not the best. Trying better discs would be a good idea too - like Taiyo Yuden or Verbatim.

    Roxio is installed also or at least a Roxio driver. Has been known to conflict w/ Nero at times. If the above doesn't do it then get rid of Roxio (uninstall) & run the zap tool.
    You can get it here: Roxio zap tool.
     
  3. 300bowler

    300bowler Regular member

    Joined:
    May 16, 2006
    Messages:
    1,918
    Likes Received:
    0
    Trophy Points:
    46
    Just to add to the great advice above, here is a guide for the dma issue
    http://forums.afterdawn.com/thread_view.cfm/260038,

    One of the worst media u can use, even when u fix the dma issue there is a chance that the media u r using will not burn successfully.
     
  4. kwmj

    kwmj Member

    Joined:
    Mar 18, 2007
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    11
    Thanks for the help.

    When I go to the menu to turn on the DMA, I can't seem to make it turn off the PIO.

    On the menu, I have a "device 0" and a "device 1". As for "device 0", Under the "Device Type" selection, it is set on "Auto Detection" and there is no other option. Under "Transfer Mode", there are two options in the menu, which are "PIO Only" and "DMA if available". I have it set on the "DMA if available" option, but in the "Current Transfer Mode", it's showing "PIO Mode" and I can't change that.

    "device 1" is running on "Ultra DMA Mode 2". Is there a way for me to make the "device 0" go to DMA other than this, as it is currently not allowing me to do so.

    I was a little worried about deleting either of the "IDE ATA/ATAPI controllers", so I just tried to disable them first so that I could reverse it if the effects were undesirable. If I have the "Primary IDE Channel" or "Intel(R) 82801G (ICH7 Family) Ultra ATA Storage Controllers - 27DF" set to disabled, the machine can not detect either of the DVD drives, so I have had to go back and enable them. I would suspect that uninstalling them would result in the same effect.

    I also used the RoxioZap too. I had Roxio ECC6 installed and had to remove it due to a conflict it was having with Windows Media Center a while back. I guess that there where some residual files still lurking around, so this seems to have wiped them out, although it didn't help with this issue.

    I knew that the media was not the greatest, but I had copied about 60 DVD's about 6 months ago with the same stuff and had zero problems, so I figured the problem probably lay elsewhere. However, it seems like the CMC media is the root problem for a lot of people, so I am going to look over the recommended media thread and buy something from that list and see if that makes a difference. It justs seems like if it worked before, it would work now, but maybe not.

    Thanks again!
     
  5. 300bowler

    300bowler Regular member

    Joined:
    May 16, 2006
    Messages:
    1,918
    Likes Received:
    0
    Trophy Points:
    46
    Yeah, the problem with Memorex is they are manufactured by different manufacturs so that could be why one batch worked fine and the new ones didn't.

    Also did u look at the guide i provide for the dma issue, it is ok to uninstall the drivers, becuz when u restart ur PC they will be installed again, making them change back to DMA.

    Do u have DVDFab?
    U can also try resetting the DMA with that program

    U hit the star button(left of the ? button) select Common settings,
    then hit the reset dma button.
     
  6. kwmj

    kwmj Member

    Joined:
    Mar 18, 2007
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    11
    Okay, I went out and bought a couple different types of DVD+R media using the "Nice List of DVD Media" from the media portion of the forum. I wanted to get Verbatim, so I went to Wal-Mart because it was on their webpage, but unfortunately, they did not have it at the store, and most of what they had was stuff I've read to stay away from.

    At first, I tried some Maxell DVD+R, but it turns out it was the CMC MAG junk too. My 2nd try was the Memorex DVD+R. Seems like most people don't like Memorex on here, but this particular one was on the list as being good. The one on the list is RICOHJPNR01, and what I bought is RICHOJPNR03, so I am assuming that there are equally as good since they are the same manufactuer, or am I mistaken?

    Either way, even the the RICHOJPNR03 discs, I have exactly the same problem.

    I just cannot seem to make my drive go to DMA, as I had mentioned in my last post. Is this something to do with this particular drive? If I were to buy an external burner to use, would this likely fix my problem that I am having. It's getting quite frustrating at this point. Or unless there is another way to make the system put that drive on DMA, I am thinking that that is where my problem is.

    I will include my lastest Burn Error message just in case someone wants to look over it again to see if there may be another cause of this issue. What do you think I should do at this point. Thanks much for the assistance.


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero API version: 7.5.9.0
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Nero\Nero 7\Core\
    Application: ahead\Nero - Burning Rom
    Internal Version: 7, 5, 9, 0

    Recorder: <HP DVD Writer 840b> Version: HJ86 - HA 1 TA 0 - 7.5.9.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6L300S0 iaStor Port 0 ID 0 DMA: On
    DiskPeripheral : WDC WD3200KS-00PFB0 iaStor Port 0 ID 1 DMA: Off
    CdRomPeripheral : HP DVD Writer 840b atapi Port 1 ID 0 DMA: Off
    CdRomPeripheral : IDE-DVD DROM6216 atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HP DVD Writer 840b F: CDRom0
    IDE-DVD DROM6216 G: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 2047MB (2097151kB)
    Free physical memory: 2047MB (2097151kB)
    Memory in use : 19 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    19.3.2007
    NeroAPI
    12:10:06 PM #1 Phase 112 File APIProgress.cpp, Line 282
    DVD-Video files reallocation started

    12:10:06 PM #2 Phase 114 File APIProgress.cpp, Line 282
    DVD-Video files reallocation completed (no file modified)

    12:10:06 PM #3 Phase 111 File APIProgress.cpp, Line 282
    DVD-Video files sorted

    12:10:06 PM #4 Text 0 File SCSIPTICommands.cpp, Line 411
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    12:10:06 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 838
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    12:10:06 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3332
    First writeable address = 0 (0x00000000)

    12:10:06 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3332
    First writeable address = 0 (0x00000000)

    12:10:06 PM #8 Text 0 File Burncd.cpp, Line 3451
    Turn on Disc-At-Once, using DVD media

    12:10:06 PM #9 Text 0 File DlgWaitCD.cpp, Line 306
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 1957167 (434:55.42, 3822MB)

    12:10:06 PM #10 Text 0 File DlgWaitCD.cpp, Line 318
    Write in overburning mode: NO

    12:10:06 PM #11 Text 0 File DlgWaitCD.cpp, Line 2903
    Recorder: HP DVD Writer 840b, Media type: DVD+R
    Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
    Disc Application Code: 0, Extended Information Indicators: 7

    12:10:06 PM #12 Text 0 File DlgWaitCD.cpp, Line 490
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    12:10:06 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 821
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1957168 (1957168) = #1957168/434:55.43
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1957168 blocks [F: HP DVD Writer 840b]
    --------------------------------------------------------------

    12:10:06 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1024
    Prepare [F: HP DVD Writer 840b] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4008280064, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 1957168 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 1957168 | 0 | 0x00
    1957168 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    12:10:06 PM #15 Text 0 File SCSIPTICommands.cpp, Line 209
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    12:10:06 PM #16 Phase 24 File APIProgress.cpp, Line 282
    Caching of files started

    12:10:06 PM #17 Text 0 File Burncd.cpp, Line 4278
    Cache writing successful.

    12:10:06 PM #18 Phase 25 File APIProgress.cpp, Line 282
    Caching of files completed

    12:10:06 PM #19 Phase 36 File APIProgress.cpp, Line 282
    Burn process started at 4x (5,540 KB/s)

    12:10:06 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2743
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:10:06 PM #21 Text 0 File Cdrdrv.cpp, Line 9234
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: R03
    Product revision number: 4
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
    23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    12:10:06 PM #22 SPTI -1066 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
    Buffer x04a7fa00: Len x648

    12:10:06 PM #23 Text 0 File DVDPlusRW.cpp, Line 674
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    12:13:34 PM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x80
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
    Buffer x071b0040: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    12:13:34 PM #25 CDR -1135 File Writer.cpp, Line 299
    Write error
    F: HP DVD Writer 840b

    12:13:34 PM #26 Phase 127 File APIProgress.cpp, Line 282
    Generating DVD high compatibility borders

    12:13:34 PM #27 Phase 129 File APIProgress.cpp, Line 282
    Generating DVD borders completed successfully

    12:13:34 PM #28 Phase 38 File APIProgress.cpp, Line 282
    Burn process failed at 4x (5,540 KB/s)

    12:13:34 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 863
    DRM: DRM burn session terminated.

    12:13:34 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 892
    DRM: Closing entire DRM handling. Bye.

    12:13:34 PM #31 Text 0 File SCSIPTICommands.cpp, Line 254
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    12:13:41 PM #32 Text 0 File Cdrdrv.cpp, Line 10467
    DriveLocker: UnLockVolume completed

    12:13:41 PM #33 Text 0 File SCSIPTICommands.cpp, Line 411
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
    File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 9/27/2006 5:53:22 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
  7. 300bowler

    300bowler Regular member

    Joined:
    May 16, 2006
    Messages:
    1,918
    Likes Received:
    0
    Trophy Points:
    46
    Ur burner and HDD are in PIO mode, this is more than likely the problem,
    did u read my other post?
    Have u tried the guide?
    Have u tried DVDFab?

    DVDFab LINK
     
  8. kwmj

    kwmj Member

    Joined:
    Mar 18, 2007
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    11
    Sorry about that. I did overlook your last post.

    I've been working on this issue all morning, and still no luck. I was able to get the DVD-ROM drive to return to the DMA setting by editing the registry as you had listed in the guides. Still no luck on the Hard Drive however, including using the DVDFab reset button. I looked over the Western Digital webpage and it says to do the same thing I've been told to do here. Both device 0 & 1 are showing that they are on the DMA 2, but when I have the burn error, it's showing that the one hard drive is not on DMA.

    It may be worth pointing out that this HD is a 2nd HD and not the one my operating system or the files being backed-up are located. Does it still matter that it's not DMA even though it's not being used in this process?

    I started having the "Out of Memory" problem when I made some of the changes you recommended. I knew that was not really possible since I have 4 GB RAM on this machine, but using the forums, I found the fix for that too.

    I've tried pretty much everything I could find on the forums and in the guides, including uninstalling the IDE ATA/ATAPI drivers, the DVD drivers and the Hard Drive drivers, but still, same problem each time. I just can't seem to find a reason for that one hard drive to not run in the DMA mode. Is it possible to edit the registry for the HD, as I had to do for the DVD-ROM? Just don't know if there is much more I can do without just taking the drive out of the system all together, which I'm really not too interested in doing.

    Any last thoughts? I appreciate all of the help. Thanks
     
    Last edited: Mar 20, 2007
  9. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    Below is my canned response to DMA PIO problems. It's simple, but you've got to do the uninstall sometimes to get the drives kicked back into DMA. If it's in Ultra DMA that's okay, it is DMA afterall.

    Check in Device Manager to see if DMA or PIO is on. The Secondary channel usually has the optical drives and the hard drives are on the Primary. Double click the channel and look in Advanced Settings or right click the desired channel and select Properies and look under the Advanced Settings tab. Note current transfer mode. Transfer Mode: is the setting that's desired, not necessarily what the drive is in, that's the Current Transfer Mode. SATA doesn't use DMA.

    [​IMG]

    #I is the Control Panel. Follow I, II, III. Hard drives on Primary Channel and optical drives on Secondary Channel. Uninstall and reboot to kick drives back into DMA on. After Reboot check to make sure DMA is on. If problems persist, check IDE cables, drives and mobo.
    [​IMG]
     
  10. 300bowler

    300bowler Regular member

    Joined:
    May 16, 2006
    Messages:
    1,918
    Likes Received:
    0
    Trophy Points:
    46
    This is the more important one for getting the DMA on, cuz that is why u r having trouble burning.

    Is ur burner in Ultra DMA mode 2 or PIO mode in the transfer mode in the device manager.
    maybe if u post some screen shots that would help us.


    Also one thing u can try is replacing the IDE cable.

    @Pacman
    is that Ultra DMA mode 6 a burner or a HDD?
     
    Last edited: Mar 20, 2007
  11. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    Bowler
    It's a burner. The Secondary IDE on the top of the window should have been a giveaway. Optical drives are normally on the Secondary channel and in this case it was. When I build I set things up according to standard convention.
     
  12. 300bowler

    300bowler Regular member

    Joined:
    May 16, 2006
    Messages:
    1,918
    Likes Received:
    0
    Trophy Points:
    46
    @pacman
    It depends on the MoBo though, as u can see my burner is on a primary controller
    [​IMG]
     
  13. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    What brand and model mobo are you using? Is it a factory or custom PC? If the optical drives are on the Primary, what's on the Secondary? I'm glad I hedged my comment with standard convention. Having optical drives on a Primary Channel isn't the regular way of doing things.
     
  14. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    I forgot to mention, I get Ultra DMA Mode 6 for both Primary and Secondary Channels. So the Advanced Settings window appears the same for both. Other than knowing where the drives are, the readings would tell little about which drive it is.
     
  15. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    What does it show when you open up your DVD/CD-ROM Drives?

    [​IMG]
     
  16. kwmj

    kwmj Member

    Joined:
    Mar 18, 2007
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    11
    On my last post, I forgot to add a recent burn error log report showing that I was able to get the DVD burner on DMA setting, which I will add at the bottom of this post. In the Device Manager, one thing I have noticed as a key difference from the screen shots that I keep seeing everywhere is that I do not have a Secondary IDE Channel, just the Primary.

    PacMan777 mentioned in his post that SATA does not use DMA, so that could be the problem, as both of my HDD's are SATA. However, my main drive is showing in the error report that the DMA is on, but my 2nd HDD is off?

    I had already uninstalled both of the ATA/ATAPI Controllers as you have instructed, as well as both of my DVD Drives and the 2nd Hard Drive drivers in addition, and let Windows reinstall them at start up. I also updated my Direct Memory Access Controller under the System Devices expandable menu.

    Here are a few screenshots from my system....

    [​IMG]

    You can see in this first ATA/ATAPI controller, there is not a Advanced Settings tab to select from, not sure if that is normal.

    [​IMG]

    [​IMG]

    [​IMG]

    Here is my latest burn error log. I appreciate you guys taking the time to help me out. Thanks again.


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero API version: 7.5.9.0
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Nero\Nero 7\Core\
    Application: ahead\Nero - Burning Rom
    Internal Version: 7, 5, 9, 0

    Recorder: <HP DVD Writer 840b> Version: HJ86 - HA 1 TA 0 - 7.5.9.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6L300S0 iaStor Port 0 ID 0 DMA: On
    DiskPeripheral : WDC WD3200KS-00PFB0 iaStor Port 0 ID 1 DMA: Off
    CdRomPeripheral : HP DVD Writer 840b atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : IDE-DVD DROM6216 atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HP DVD Writer 840b F: CDRom0
    IDE-DVD DROM6216 G: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 2047MB (2097151kB)
    Free physical memory: 2047MB (2097151kB)
    Memory in use : 15 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    20.3.2007
    NeroAPI
    12:25:01 PM #1 Phase 112 File APIProgress.cpp, Line 282
    DVD-Video files reallocation started

    12:25:01 PM #2 Phase 114 File APIProgress.cpp, Line 282
    DVD-Video files reallocation completed (no file modified)

    12:25:01 PM #3 Phase 111 File APIProgress.cpp, Line 282
    DVD-Video files sorted

    12:25:01 PM #4 Text 0 File SCSIPTICommands.cpp, Line 411
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    12:25:01 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 838
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    12:25:01 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3332
    First writeable address = 0 (0x00000000)

    12:25:01 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3332
    First writeable address = 0 (0x00000000)

    12:25:01 PM #8 Text 0 File Burncd.cpp, Line 3451
    Turn on Disc-At-Once, using DVD media

    12:25:01 PM #9 Text 0 File DlgWaitCD.cpp, Line 306
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2282831 (507:17.56, 4458MB)

    12:25:01 PM #10 Text 0 File DlgWaitCD.cpp, Line 318
    Write in overburning mode: NO

    12:25:01 PM #11 Text 0 File DlgWaitCD.cpp, Line 2903
    Recorder: HP DVD Writer 840b, Media type: DVD+R
    Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
    Disc Application Code: 0, Extended Information Indicators: 7

    12:25:01 PM #12 Text 0 File DlgWaitCD.cpp, Line 490
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    12:25:01 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 821
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2282832 (2282832) = #2282832/507:17.57
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2282832 blocks [F: HP DVD Writer 840b]
    --------------------------------------------------------------

    12:25:01 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1024
    Prepare [F: HP DVD Writer 840b] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4675239936, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 2282832 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 2282832 | 0 | 0x00
    2282832 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    12:25:01 PM #15 Text 0 File SCSIPTICommands.cpp, Line 209
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    12:25:01 PM #16 Phase 24 File APIProgress.cpp, Line 282
    Caching of files started

    12:25:01 PM #17 Text 0 File Burncd.cpp, Line 4278
    Cache writing successful.

    12:25:01 PM #18 Phase 25 File APIProgress.cpp, Line 282
    Caching of files completed

    12:25:01 PM #19 Phase 36 File APIProgress.cpp, Line 282
    Burn process started at 4x (5,540 KB/s)

    12:25:01 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2743
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:25:01 PM #21 Text 0 File Cdrdrv.cpp, Line 9234
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: R03
    Product revision number: 4
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
    23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    12:25:01 PM #22 SPTI -1066 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
    Buffer x04f0c200: Len x648

    12:25:01 PM #23 Text 0 File DVDPlusRW.cpp, Line 674
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    12:25:35 PM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x80
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
    Buffer x069d0040: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    12:25:35 PM #25 CDR -1135 File Writer.cpp, Line 299
    Write error
    F: HP DVD Writer 840b

    12:25:35 PM #26 Phase 127 File APIProgress.cpp, Line 282
    Generating DVD high compatibility borders

    12:25:35 PM #27 Phase 129 File APIProgress.cpp, Line 282
    Generating DVD borders completed successfully

    12:25:35 PM #28 Phase 38 File APIProgress.cpp, Line 282
    Burn process failed at 4x (5,540 KB/s)

    12:25:35 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 863
    DRM: DRM burn session terminated.

    12:25:35 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 892
    DRM: Closing entire DRM handling. Bye.

    12:25:35 PM #31 Text 0 File SCSIPTICommands.cpp, Line 254
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    12:25:42 PM #32 Text 0 File Cdrdrv.cpp, Line 10467
    DriveLocker: UnLockVolume completed

    12:25:42 PM #33 Text 0 File SCSIPTICommands.cpp, Line 411
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
    File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 9/27/2006 5:53:22 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


     
  17. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    My past experience with RICOHJPN media has been good, but in your case I'm wondering.

    Sense Key: 0x03 (KEY_MEDIUM_ERROR)

    Write error


    The errors seem to indicate a media error. The easiest way to check this out would be to use some Sony +R or Verbatim to eliminate the possibility.
     
  18. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    I noticed you're using an ASPI layer. Did you check it with aspichk.exe after installing it? If you didn't use ForceASPI, you could have a bad install.
    http://force_aspi_18.w.interia.pl/

    If you have no specific need for an ASPI layer, it isn't going to fix anything. I've been using XP and like many others, I've not needed ASPI added to XP.

    Do you have any Sonic or Roxio programs on your computer and/or any batch writing programs such as Drag to Disc or InCD in Nero?

    Often file allocation errors stem from copy protection induced compliance errors. What software are you using to rip for DVD Shrink? As I mentioned before, the drivers in XP are usually sufficient and programs like Nero carry their own ASPI layer. What all did you do to "fix" the allocation error? Can you delete all you've added to get your original problem of allocation error back? Is it too late to do a system restore to an earlier point where things were working better?
     
    Last edited: Mar 21, 2007
  19. 300bowler

    300bowler Regular member

    Joined:
    May 16, 2006
    Messages:
    1,918
    Likes Received:
    0
    Trophy Points:
    46
    @pacman
    i built my PC, it was a while ago though,

    MOBO is a DFI LanParty pro875B,

    i have 2 burners and 2 internal HDD,
    i have both my HDD hooked up with SATA

    My MoBo has 2 primary IDE's and 2 secondaries

    so i got my HDD w/OS on a primary and my main burner on the other primary.

    and i know my MoBo is not the same as most of the others.
     
  20. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    Bowler
    Your board was a good P4 board in it's day with AGP graphics, but that's a bit dated now. It had more bells and whistles than some boards, but still not that different. The extra IDE connectors you have were intended for RAID use. If your configuration works for you, there's no need to change it at this late date. However, most builders put the optical drives on the Secondary Channel. If you look in manufactured PCs, you'll see the same convention used. I've seen people with a crippled secondary put an optical on the Primary-Slave to keep from buying a new board. So, it's not unheard of having an optical drive on a Primary. It's just not the regular configuration, if nothing is wrong with the Secondary. It's your PC, do whatever works and makes you happy.

    I/O Connectors

    2 connectors for 4 additional external USB 2.0/1.1 ports
    1 front audio connector for external line-out and mic-in jacks
    1 connector for an external game/MIDI port
    2 internal audio connectors (CD-in and AUX-in)
    1 S/PDIF-in/out connector for optical cable connection
    1 connector for IrDA interface
    2 RAID IDE connectors
    2 Serial ATA connectors
    2 IDE connectors (Primary and Secondary)
    1 floppy connector
    2 ATX power supply connectors
    1 Wake-On-LAN connector
    4 fan connectors for CPU fan, chassis fan, second fan and chip fan
    1 diagnostic LED connector for external 4 diagnostic LEDs display
    EZ touch switches (power switch and reset switch)

    [​IMG]
     
    Last edited: Mar 21, 2007

Share This Page