1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Burn failed, log posted

Discussion in 'DVD Shrink forum' started by Expypate, Jan 21, 2005.

  1. Expypate

    Expypate Guest

    I have been using Shrink/Nero to burn and have made over 100 discs. It nows seems to fail on every disk. Media is the same batch. I burn -R & +R. Both fail. Any help would be great.

    Pat

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 7:06:00 AM
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM
    Nero API version: 6.6.0.1
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <SONY DVD RW DRU-500A> Version: 1.0d - HA 1 TA 1 - 6.6.0.1
    Adapter driver: <atapi> HA 1
    Drive buffer : 8192kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    DiskPeripheral : ST3120026A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TOSHIBA DVD-ROM SD-M1712 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : SONY DVD RW DRU-500A atapi Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    TOSHIBA DVD-ROM SD-M1712 D: CDRom0
    SONY DVD RW DRU-500A E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 162MB (166200kB)
    Memory in use : 68 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    21.1.2005
    NeroAPI
    6:15:14 PM #1 Phase 112 File APIProgress.cpp, Line 276
    DVD-Video files reallocation started

    6:15:14 PM #2 Phase 114 File APIProgress.cpp, Line 276
    DVD-Video files reallocation completed (no file modified)

    6:15:14 PM #3 Phase 111 File APIProgress.cpp, Line 276
    DVD-Video files sorted

    6:15:14 PM #4 Text 0 File Reader.cpp, Line 127
    Reader running

    6:15:14 PM #5 Text 0 File Writer.cpp, Line 122
    Writer SONY DVD RW DRU-500A running

    6:15:14 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    6:15:14 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    6:15:14 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    6:15:14 PM #9 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-At-Once, using DVD media

    6:15:14 PM #10 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2286143 (508:01.68, 4465MB)

    6:15:14 PM #11 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO

    6:15:14 PM #12 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: SONY DVD RW DRU-500A, Media type: DVD+R

    6:15:14 PM #13 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    6:15:14 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [SONY DVD RW DRU-500A]
    --------------------------------------------------------------

    6:15:14 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [SONY DVD RW DRU-500A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2286144 | lead-out | 1 | 0x00 | 0x41

    6:15:15 PM #16 Phase 24 File APIProgress.cpp, Line 276
    Caching of files started

    6:15:15 PM #17 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    6:15:15 PM #18 Phase 25 File APIProgress.cpp, Line 276
    Caching of files completed

    6:15:15 PM #19 Phase 36 File APIProgress.cpp, Line 276
    Burn process started at 2x (2,770 KB/s)

    6:15:16 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    6:15:16 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B946000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
    0x00 0x00 0x00 0x00 0x24 0x00

    6:15:16 PM #22 Text 0 File DVDPlusRW.cpp, Line 632
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    6:27:12 PM #23 SCSI -1064 File Cdrdrv.cpp, Line 1432
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0CF20000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x21
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x0E 0x8A 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
    0x00 0x00 0x00 0x00 0x21 0x02

    6:27:12 PM #24 CDR -1064 File Writer.cpp, Line 311
    Invalid block address

    6:27:12 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    6:27:12 PM #26 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    6:27:13 PM #27 SCSI -1066 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0xFF 0xFD 0x00 0x00 0x12
    0x00 0x00 0x00 0x00 0x24 0x00

    6:27:13 PM #28 SCSI -1176 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x04
    CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
    0x00 0x00 0x00 0x00 0x72 0x04

    6:27:13 PM #29 CDR -1066 File WriterStatus.cpp, Line 167
    Invalid field in command
    SONY DVD RW DRU-500A\H1 T1

    6:27:13 PM #30 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    6:27:13 PM #31 Phase 38 File APIProgress.cpp, Line 276
    Burn process failed at 2x (2,770 KB/s)

    6:27:13 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    6:27:13 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 7:06:00 AM

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
  2. bardie

    bardie Regular member

    Joined:
    Dec 2, 2004
    Messages:
    584
    Likes Received:
    0
    Trophy Points:
    26
    At a quick look you need to enable DMA mode for your Sony DVD RW.
     
  3. Expypate

    Expypate Guest

    I tried what you said, but no change. I went to the Sony website and updated the firmware. Still no change. I found a test utility on their site and the drive failed. I emailed the results to Sony as they requested. The drive is old, so I guess it may be time for a new one anyway.

    Thanks,

    Pat
     
  4. flip218

    flip218 Moderator Staff Member

    Joined:
    Apr 25, 2004
    Messages:
    8,344
    Likes Received:
    0
    Trophy Points:
    116
    sometimes you have to uninstall the drive, reboot and let windows reinstall the drive. Did you try that?
     
  5. Veblin

    Veblin Active member

    Joined:
    Feb 27, 2003
    Messages:
    1,241
    Likes Received:
    0
    Trophy Points:
    66
    Sometimes you have to uninstall the IDE Channel the drive is on, reboot and let Windows reinstall the IDE Channel. Did you try that?
     
  6. Expypate

    Expypate Guest

    I didn't delete the drive, but when I updated the firmware it came up as new hardware found. I assumed that was the same as reinstalling it.
     
  7. saugmon

    saugmon Senior member

    Joined:
    Oct 9, 2004
    Messages:
    6,064
    Likes Received:
    1
    Trophy Points:
    116
    I read a post the other day that when nero errors out around 6 times,then it automatically reverts to pio mode. Start,control panel,system check,hardware,device manager,ide-atapi controllers,primary ide-driver,right click properties,driver, then uninstall. reboot
    Do the same to the secondary ide,reboot.



    See if this helps
     
  8. Expypate

    Expypate Guest

    I uninstalled the drive and rebooted. I was able to burn 2 +r's. I slowed the burner to 2x on the first and max on the 2nd. I switched to -r and burned at max and it failed. I have not changed media or added any software. Any other ideas would be great.
     
  9. Expypate

    Expypate Guest

    sorry....dble post
     
    Last edited by a moderator: Jan 26, 2005

Share This Page