1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Burn Failed?

Discussion in 'DVDR' started by hdserv, Aug 29, 2004.

  1. hdserv

    hdserv Member

    Joined:
    Aug 29, 2004
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    11
    I have a problem while trying to copy any DVD. I get 99% complete and get burn failed. Any help?
    Thank You in Advance.

    dan


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 4:03:36 PM
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
    Nero version: 6.3.0.3
    Recorder: <PIONEER DVD-RW DVR-104> Version: 1.10 - HA 1 TA 0 - 6.3.0.3
    Adapter driver: <atapi> HA 1
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <PIONEER DVD-RW DVR-104 >Version: 1.10 - HA 1 TA 0 - 6.3.0.3
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 4D080H4 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : PIONEER DVD-RW DVR-104 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : ASUS CD-S400/A atapi Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    PIONEER DVD-RW DVR-104 F: CDRom0
    ASUS CD-S400/A G: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 511MB (523808kB)
    Free physical memory: 421MB (431440kB)
    Memory in use : 17 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    29.8.2004
    ===== Disc-Copy over image - 1st step : Copy to image ...

    3:36:33 PM #1 Text 0 File Reader.cpp, Line 118
    Reader running

    3:36:33 PM #2 Text 0 File Writer.cpp, Line 124
    Writer Image Recorder running

    3:36:33 PM #3 Text 0 File DVDCopy.cpp, Line 241
    DVD Track-Information from source disc
    S01 T01 Con 0x14 Start 0 Len 2295104 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0)

    3:36:33 PM #4 Text 0 File DVDCopy.cpp, Line 334
    Max -1 tracks of 1 allowed to copy
    1: 0 - 2295104 = 2295104, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

    3:36:33 PM #5 Text 0 File Burncd.cpp, Line 3101
    Turn on Disc-at-once, using DVD media

    3:36:33 PM #6 Text 0 File DlgWaitCD.cpp, Line 240
    Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
    Last address to be written: 2295103 (510:01.28, 4482MB)

    3:36:33 PM #7 Text 0 File DlgWaitCD.cpp, Line 245
    Write in overburning mode: FALSE

    3:36:33 PM #8 Text 0 File DlgWaitCD.cpp, Line 2085
    Recorder: Image Recorder;
    CD type reading failed
    ATIP Data: ?

    3:36:33 PM #9 Text 0 File DlgWaitCD.cpp, Line 406
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    3:36:33 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 779
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - Data (mode 1))
    2 indices, index0 (150) not provided
    original disc pos #0 + 2295104 (2295104) = #2295104/510:1.29
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295104 blocks [ Image Recorder ]
    --------------------------------------------------------------

    3:36:33 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 948
    Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4700680192, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    -150 | lead-in | 0 | 0x00 | 0x41
    -150 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2295104 | lead-out | 1 | 0x00 | 0x41

    3:36:33 PM #12 Phase 120 File dlgbrnst.cpp, Line 1800
    Creating the image for burning

    3:36:33 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2264
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    3:49:53 PM #14 SCSI -1128 File Cdrdrv.cpp, Line 1431
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x032D5000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x05
    CDB Data: 0x28 0x00 0x00 0x22 0x97 0x80 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x22 0x97 0x90 0x0E
    0x00 0x00 0x00 0x00 0x11 0x05

    3:50:01 PM #15 SCSI -1128 File Cdrdrv.cpp, Line 1431
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x032D5000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x05
    CDB Data: 0x28 0x00 0x00 0x22 0x97 0x80 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x22 0x97 0x90 0x0E
    0x00 0x00 0x00 0x00 0x11 0x05

    3:50:01 PM #16 TRANSFER -25 File Reader.cpp, Line 371
    Error reading data

    3:50:01 PM #17 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    3:50:02 PM #18 Phase 67 File dlgbrnst.cpp, Line 1800
    Burn process failed



    ===== Disc-Copy over image - 2nd step : Burn the image ...

    3:36:33 PM #1 Text 0 File Reader.cpp, Line 118
    Reader running

    3:36:33 PM #2 Text 0 File Writer.cpp, Line 124
    Writer Image Recorder running

    3:36:33 PM #3 Text 0 File DVDCopy.cpp, Line 241
    DVD Track-Information from source disc
    S01 T01 Con 0x14 Start 0 Len 2295104 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0)

    3:36:33 PM #4 Text 0 File DVDCopy.cpp, Line 334
    Max -1 tracks of 1 allowed to copy
    1: 0 - 2295104 = 2295104, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

    3:36:33 PM #5 Text 0 File Burncd.cpp, Line 3101
    Turn on Disc-at-once, using DVD media

    3:36:33 PM #6 Text 0 File DlgWaitCD.cpp, Line 240
    Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
    Last address to be written: 2295103 (510:01.28, 4482MB)

    3:36:33 PM #7 Text 0 File DlgWaitCD.cpp, Line 245
    Write in overburning mode: FALSE

    3:36:33 PM #8 Text 0 File DlgWaitCD.cpp, Line 2085
    Recorder: Image Recorder;
    CD type reading failed
    ATIP Data: ?

    3:36:33 PM #9 Text 0 File DlgWaitCD.cpp, Line 406
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    3:36:33 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 779
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - Data (mode 1))
    2 indices, index0 (150) not provided
    original disc pos #0 + 2295104 (2295104) = #2295104/510:1.29
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295104 blocks [ Image Recorder ]
    --------------------------------------------------------------

    3:36:33 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 948
    Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4700680192, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    -150 | lead-in | 0 | 0x00 | 0x41
    -150 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2295104 | lead-out | 1 | 0x00 | 0x41

    3:36:33 PM #12 Phase 120 File dlgbrnst.cpp, Line 1800
    Creating the image for burning

    3:36:33 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2264
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    3:49:53 PM #14 SCSI -1128 File Cdrdrv.cpp, Line 1431
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x032D5000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x05
    CDB Data: 0x28 0x00 0x00 0x22 0x97 0x80 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x22 0x97 0x90 0x0E
    0x00 0x00 0x00 0x00 0x11 0x05

    3:50:01 PM #15 SCSI -1128 File Cdrdrv.cpp, Line 1431
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x032D5000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x05
    CDB Data: 0x28 0x00 0x00 0x22 0x97 0x80 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x22 0x97 0x90 0x0E
    0x00 0x00 0x00 0x00 0x11 0x05

    3:50:01 PM #16 TRANSFER -25 File Reader.cpp, Line 371
    Error reading data

    3:50:01 PM #17 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    3:50:02 PM #18 Phase 67 File dlgbrnst.cpp, Line 1800
    Burn process failed


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 4:03:36 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.02.29a, size=16160 bytes, created 11/16/2001 6:02:00 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 8/18/2001 8:00:00 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
    Last edited: Aug 29, 2004
  2. fasfrank

    fasfrank Active member

    Joined:
    Oct 15, 2003
    Messages:
    4,117
    Likes Received:
    0
    Trophy Points:
    66
    Hi Dan,
    First, edit your post because you have your Nero registration number showing. It's the 1A23- number at the top of the log file. The edit post icon is next to the "report an ofensive Post" on the orange bar.

    I would do this. Get the newest version of Nero 6, yours is seriously out of date.

    http://nero.com/us/nero-up.php

    I did notice your DMA is off on your CD drive but that shouldn't be a problem here.

    Your log looks odd to me because I see a lot of "image recorder" stuff here, there is no mention of your Pioneer during the actual burn process.

    I think a reinstall of Nero will help out. Make sure you set your burner as the target. Also could you explain exactly how you are using the program, IE are you using StartSmart or some other feature?
     
  3. hdserv

    hdserv Member

    Joined:
    Aug 29, 2004
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    11
    Thanks Fasfrank,

    I followed your advice and upgraded my version of nero, and still have the exact same problem.
    I start nero burning rom using the start button choosing it from the selection under nero suite. After the program starts I choose copy disc. The image file is going to copy to a temp file, in this case the source drive is also my dvd burner. I click copy and it does begin to copy. At exactly 99% I get an error "read failed", and then another error "burn process failed".

    Any suggestions?

    Thank You again in advance. Here's another copy of the log.

    dan


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 4:03:36 PM
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
    Nero version: 6.3.1.20
    Recorder: <PIONEER DVD-RW DVR-104> Version: 1.10 - HA 1 TA 0 - 6.3.1.20
    Adapter driver: <atapi> HA 1
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <PIONEER DVD-RW DVR-104 >Version: 1.10 - HA 1 TA 0 - 6.3.1.20
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 4D080H4 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : PIONEER DVD-RW DVR-104 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : ASUS CD-S400/A atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    PIONEER DVD-RW DVR-104 F: CDRom0
    ASUS CD-S400/A G: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523808kB)
    Free physical memory: 426MB (437096kB)
    Memory in use : 16 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    29.8.2004
    ===== Disc-Copy over image - 1st step : Copy to image ...

    7:10:31 PM #1 SCSI -1033 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x04 0x01

    7:10:31 PM #2 SCSI -1033 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x04 0x01

    7:10:33 PM #3 SCSI -1033 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x04 0x01

    7:10:35 PM #4 SCSI -1033 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x04 0x01

    7:10:37 PM #5 SCSI -1033 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x04 0x01

    7:10:39 PM #6 SCSI -1033 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x04 0x01

    7:11:39 PM #7 Text 0 File Reader.cpp, Line 126
    Reader running

    7:11:39 PM #8 Text 0 File Writer.cpp, Line 124
    Writer Image Recorder running

    7:11:39 PM #9 Text 0 File DVDCopy.cpp, Line 271
    DVD Track-Information from source disc
    S01 T01 Con 0x14 Start 0 Len 2295104 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)

    7:11:39 PM #10 Text 0 File DVDCopy.cpp, Line 374
    Max -1 tracks of 1 allowed to copy
    1: 0 - 2295104 = 2295104, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

    7:11:39 PM #11 Text 0 File Burncd.cpp, Line 3173
    Turn on Disc-at-once, using DVD media

    7:11:39 PM #12 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
    Last address to be written: 2295103 (510:01.28, 4482MB)

    7:11:39 PM #13 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    7:11:39 PM #14 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: Image Recorder;
    CD type reading failed
    ATIP Data: ?

    7:11:39 PM #15 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    7:11:39 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - Data (mode 1))
    2 indices, index0 (150) not provided
    original disc pos #0 + 2295104 (2295104) = #2295104/510:1.29
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295104 blocks [ Image Recorder ]
    --------------------------------------------------------------

    7:11:39 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4700680192, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    -150 | lead-in | 0 | 0x00 | 0x41
    -150 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2295104 | lead-out | 1 | 0x00 | 0x41

    7:11:39 PM #18 Phase 120 File dlgbrnst.cpp, Line 1855
    Creating the image for burning

    7:11:39 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    7:24:06 PM #20 SCSI -1128 File Cdrdrv.cpp, Line 1442
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03761000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x05
    CDB Data: 0x28 0x00 0x00 0x22 0x97 0x80 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x22 0x97 0x90 0x0E
    0x00 0x00 0x00 0x00 0x11 0x05

    7:24:13 PM #21 SCSI -1128 File Cdrdrv.cpp, Line 1442
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03761000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x05
    CDB Data: 0x28 0x00 0x00 0x22 0x97 0x80 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x22 0x97 0x90 0x0E
    0x00 0x00 0x00 0x00 0x11 0x05

    7:24:13 PM #22 TRANSFER -25 File Reader.cpp, Line 379
    Error reading data

    7:24:13 PM #23 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    7:24:15 PM #24 Phase 67 File dlgbrnst.cpp, Line 1855
    Burn process failed



    ===== Disc-Copy over image - 2nd step : Burn the image ...

    7:10:31 PM #1 SCSI -1033 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x04 0x01

    7:10:31 PM #2 SCSI -1033 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x04 0x01

    7:10:33 PM #3 SCSI -1033 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x04 0x01

    7:10:35 PM #4 SCSI -1033 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x04 0x01

    7:10:37 PM #5 SCSI -1033 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x04 0x01

    7:10:39 PM #6 SCSI -1033 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x04 0x01

    7:11:39 PM #7 Text 0 File Reader.cpp, Line 126
    Reader running

    7:11:39 PM #8 Text 0 File Writer.cpp, Line 124
    Writer Image Recorder running

    7:11:39 PM #9 Text 0 File DVDCopy.cpp, Line 271
    DVD Track-Information from source disc
    S01 T01 Con 0x14 Start 0 Len 2295104 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)

    7:11:39 PM #10 Text 0 File DVDCopy.cpp, Line 374
    Max -1 tracks of 1 allowed to copy
    1: 0 - 2295104 = 2295104, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

    7:11:39 PM #11 Text 0 File Burncd.cpp, Line 3173
    Turn on Disc-at-once, using DVD media

    7:11:39 PM #12 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
    Last address to be written: 2295103 (510:01.28, 4482MB)

    7:11:39 PM #13 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    7:11:39 PM #14 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: Image Recorder;
    CD type reading failed
    ATIP Data: ?

    7:11:39 PM #15 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    7:11:39 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - Data (mode 1))
    2 indices, index0 (150) not provided
    original disc pos #0 + 2295104 (2295104) = #2295104/510:1.29
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295104 blocks [ Image Recorder ]
    --------------------------------------------------------------

    7:11:39 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4700680192, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    -150 | lead-in | 0 | 0x00 | 0x41
    -150 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2295104 | lead-out | 1 | 0x00 | 0x41

    7:11:39 PM #18 Phase 120 File dlgbrnst.cpp, Line 1855
    Creating the image for burning

    7:11:39 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    7:24:06 PM #20 SCSI -1128 File Cdrdrv.cpp, Line 1442
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03761000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x05
    CDB Data: 0x28 0x00 0x00 0x22 0x97 0x80 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x22 0x97 0x90 0x0E
    0x00 0x00 0x00 0x00 0x11 0x05

    7:24:13 PM #21 SCSI -1128 File Cdrdrv.cpp, Line 1442
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03761000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x05
    CDB Data: 0x28 0x00 0x00 0x22 0x97 0x80 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x22 0x97 0x90 0x0E
    0x00 0x00 0x00 0x00 0x11 0x05

    7:24:13 PM #22 TRANSFER -25 File Reader.cpp, Line 379
    Error reading data

    7:24:13 PM #23 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    7:24:15 PM #24 Phase 67 File dlgbrnst.cpp, Line 1855
    Burn process failed


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 4:03:36 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.02.29a, size=16160 bytes, created 11/16/2001 6:02:00 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 1, 5, 7, size=94320 bytes, created 2/10/2004 1:22:58 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 1, 5, 7, size=27408 bytes, created 2/10/2004 1:23:10 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 1, 5, 7, size=9555 bytes, created 2/10/2004 1:23:02 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 8/18/2001 8:00:00 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


     
  4. Nephilim

    Nephilim Moderator Staff Member

    Joined:
    Feb 13, 2003
    Messages:
    14,942
    Likes Received:
    0
    Trophy Points:
    116
    You might want to remove InCD. packet writing apps have a tendency to booger up the burn process :)
     
  5. fasfrank

    fasfrank Active member

    Joined:
    Oct 15, 2003
    Messages:
    4,117
    Likes Received:
    0
    Trophy Points:
    66
    You are going to need to go back to Nero and get their InCD removal tool. It causes problems and if you don't need it you should use the tool to remove it. You can reinstall it after you get your burn problem figured out.

    Why are you not using Shrink with Nero to Auto burn your discs? This is a lot easier than having to open Nero and set up the burn. Shrink can do it for you.

    You can do it manually though.....

    I'm gonna give you a little guide to use Nero a bit differently:

    First open the program like you normally do. Burning ROM should open with the "Copy Disc" wizard on top.

    Close the wizard, select File and then select New.

    The New Compilation window opens.

    To the left you can see a vertical row of icons. Select DVD if it says CD from the top menu and then select the third icon down, DVD-Video.

    Normally all the tabs are OK just the way they are but lets go over them:

    Info, should be OK.

    ISO, Should have File name length set to Max of 11=8+3 [ISO level 1], Character Set should be ISO 9660. Leave the rest of the blocks unchecked.

    Label, you can put whatever you like, I leave it all blank or at the default settings.

    Dates, Same as Label.

    Misc., both blocks checked and 64kb in the window.

    Burn, self explanatory. You can see where to set the program for a simulation, Adjust the write speed and other stuff.

    All of this is assuming you have ripped your disc with Shrink and now have a movie in a folder on your hard drive.

    The next step is to select New. Its a button located at the top right of the window.

    Make sure your recorder is listed in the upper right scroll box.

    At the far left you will see a disc icon with the word NEW next to it. Below that, find the small red VIDEO_TS folder and click on it. You will see it open and the folder icons to the right will vanish.

    I assume you know how to browse for things so use the File Browser, the right middle window, to find your movie and the VIDEO_TS folder. left click the folder and the contents should now appear in the window at the far right.

    Move your cursor over these files and RIGHT click them. A menu appears. Select "Select All". The files turn blue. Right click them again and from the menu, select "Copy to Compilation". All the files appear in the middle left window.

    Put a blank disc in the Recorder that is listed in the scroll box.

    Give it a few seconds and select the burn icon at the top. Its the match on fire with the disc.

    The burn tab appears again, so just verify your settings and you are ready. Select "Burn" to start the burn process.

    This is how I use Nero. Only takes a few seconds to set up, most of the stuff is set correctly as default.

    Let me know what you think,
    Frank
     
  6. Surfingus

    Surfingus Member

    Joined:
    May 29, 2003
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    Hi hdserv,

    This is my 1st post on the forum so here goes.
    I've HAD a lot of trouble too regarding the burn situ. I have been working on trying to burn a dvd with NO luck.what KEPT happening was that my DVD burner tray would eject by it's self, thus making it look like there was NO disc in there. below is the file log.....after the log file will be MY answer to burning the DVD's i created. I hope it helps. SORRY if the post is in the wrong section too

    *****************************************************

    Windows XP 5.1

    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 09:20:56
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 17:33:44
    Nero API version: 6.3.1.20
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <DVDRW IDE1004> Version: 0043 - HA 1 TA 1 - 6.3.1.20
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    DiskPeripheral : IC35L060AVVA07-0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : IC35L120AVVA07-0 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-106 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : DVDRW IDE1004 atapi Port 1 ID 1 DMA: On
    DiskPeripheral : Maxtor 6Y120P0 YAR4 ultra Port 2 ID 0 DMA: Off
    DiskPeripheral : WDC WD600AB-00BVA0 21.0 ultra Port 2 ID 1 DMA: Off

    === CDRom-Device-Map ===
    PIONEER DVD-ROM DVD-106 E: CDRom0
    DVDRW IDE1004 F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 767MB (785908kB)
    Free physical memory: 299MB (306860kB)
    Memory in use : 60 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    30.8.2004
    NeroAPI
    17:29:10 #1 Phase 112 File APIProgress.cpp, Line 273
    DVD-Video files reallocation started

    17:29:10 #2 Phase 114 File APIProgress.cpp, Line 273
    DVD-Video files reallocation completed (no file modified)

    17:29:10 #3 Phase 111 File APIProgress.cpp, Line 273
    DVD-Video files sorted

    17:30:02 #4 Text 0 File Reader.cpp, Line 126
    Reader running

    17:30:02 #5 Text 0 File AudioCompilationImpl.cpp, Line 817
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    17:30:02 #6 Text 0 File Writer.cpp, Line 124
    Writer DVDRW IDE1004 running

    17:30:03 #7 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    17:30:03 #8 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    17:30:03 #9 Text 0 File Burncd.cpp, Line 3173
    Turn on Disc-At-Once, using DVD media

    17:30:31 #10 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1481775 (329:17.00, 2894MB)

    17:30:31 #11 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO

    17:30:31 #12 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: DVDRW IDE1004, Media type: DVD-R
    Disc Manufacturer: Prodis - cS03
    Disc Application Code: 64, Disc Physical Code: 193

    17:30:31 #13 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

    17:30:31 #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1481776 (1481776) = #?????76/329:17.1
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1481776 blocks [DVDRW IDE1004 ]
    --------------------------------------------------------------

    17:30:32 #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [DVDRW IDE1004 ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3034677248, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1481776 | lead-out | 1 | 0x00 | 0x41

    17:30:32 #16 Phase 24 File APIProgress.cpp, Line 273
    Caching of files started

    17:30:32 #17 Text 0 File Burncd.cpp, Line 4183
    Cache writing successful.

    17:30:32 #18 Phase 25 File APIProgress.cpp, Line 273
    Caching of files completed

    17:30:32 #19 Phase 36 File APIProgress.cpp, Line 273
    Burn process started at 4x (5,540 KB/s)

    17:30:33 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    17:30:34 #21 Text 0 File DVDR.cpp, Line 1942
    Recording mode: Sequential Recording Mode

    17:30:34 #22 Text 0 File Mmc.cpp, Line 20531
    Set BUFE: Super Link -> ON

    17:30:34 #23 Text 0 File DVDR.cpp, Line 2083
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    17:30:34 #24 Text 0 File Cdrdrv.cpp, Line 8128
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    17:32:17 #25 SCSI -1196 File Cdrdrv.cpp, Line 1442
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x014F0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x3A
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x3A 0x02

    17:32:17 #26 CDR -1196 File Writer.cpp, Line 304
    Disc not present - tray open

    17:32:17 #27 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    17:32:17 #28 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    17:32:17 #29 Text 0 File DVDR.cpp, Line 2325
    EndDAO: Last written address was -1

    17:33:23 #30 CDR -1196 File WriterStatus.cpp, Line 164
    Disc not present - tray open
    DVDRW IDE1004\H1 T1

    17:33:23 #31 TRANSFER -24 File WriterStatus.cpp, Line 164
    Could not perform end of Disc-at-once

    17:33:23 #32 Phase 38 File APIProgress.cpp, Line 273
    Burn process failed at 4x (5,540 KB/s)

    17:33:23 #33 Text 0 File AudioCompilationImpl.cpp, Line 828
    DRM: DRM burn session terminated.

    17:33:23 #34 Text 0 File AudioCompilationImpl.cpp, Line 857
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
    ******************************************************

    The way i over came the problem of burn fail was to run Clone DVD2 to burn the dvd's. In other words, i used shrink Dvd to encode the disc as i wanted it to be then used Clone Dvd2 to burn the dvd.
    It sucks BUT for me it HAS worked! LOL
    Any ideas anyone?
     
  7. fasfrank

    fasfrank Active member

    Joined:
    Oct 15, 2003
    Messages:
    4,117
    Likes Received:
    0
    Trophy Points:
    66
    Switching to a different program is always an option. I look at this way though. If I had a problem with my car not starting, and I asked for advice on how to fix it and instead of repair procedures, I was told to buy another car. I would not go there for advice again. That is a bit extreme, I know. We are dealing with software here, not autos.

    What would you tell the person who switched programs if they had problems with the new program, switch again?

    The way I see it is that if a person buys a program then it should work. I can't ask a person to throw away a program unless it absolutely cannot work. There are thousands of people using Nero 6 without problems. The program is sound. If it does not work then in most cases it is a fault with the software/hardware platform it is installed on, an improper or corrupted installation or operator error.
     

Share This Page