1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Burn in hell Nero!

Discussion in 'Nero discussion' started by kaolani, Jan 30, 2007.

  1. kaolani

    kaolani Member

    Joined:
    Jan 30, 2007
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    Hey guys. I'm new to the boards. I've been using Nero to burn DVD files for over a year now with the same brand blank dvdr media without many problems. However, in the last couple weeks, I'd say I wasted in the neighborhood of 7-15 dvd's due to a Nero burn error message. I am now only able to write to cd's but not dvd's. I've attempted to use two known successful brands or media to no avail. I restored my computer to its state before the errors and reinstalled Nero software to no avail. Stead of beating my head against the monitor, I decided to hit up the knowledge spring that is the afterdawn.com community. Thanks in advance. Here is the Nero burn error message I receive:


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 11:35:32 AM
    Nero API version: 6.6.0.8
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <TOSHIBA CD/DVDW SD-R5372>Version: TU55 - HA 1 TA 0 - 6.6.0.8
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD400EB-75CPF0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TOSHIBA CD/DVDW SD-R5372 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : SONY CD-RW CRX300E atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    TOSHIBA CD/DVDW SD-R5372 D: CDRom0
    SONY CD-RW CRX300E E: CDRom1
    Ativa U3 smart 512MB F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 766MB (784384kB)
    Free physical memory: 487MB (499100kB)
    Memory in use : 36 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    30.1.2007
    NeroAPI
    3:49:45 PM #1 Phase 112 File APIProgress.cpp, Line 276
    DVD-Video files reallocation started

    3:49:45 PM #2 Phase 114 File APIProgress.cpp, Line 276
    DVD-Video files reallocation completed (no file modified)

    3:49:45 PM #3 Phase 111 File APIProgress.cpp, Line 276
    DVD-Video files sorted

    3:49:45 PM #4 Text 0 File Reader.cpp, Line 127
    Reader running

    3:49:45 PM #5 Text 0 File Writer.cpp, Line 122
    Writer TOSHIBA CD/DVDW SD-R5372 running

    3:49:45 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    3:49:45 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    3:49:45 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    3:49:45 PM #9 Text 0 File Burncd.cpp, Line 3153
    Turn on Disc-At-Once, using DVD media

    3:49:46 PM #10 Text 0 File DlgWaitCD.cpp, Line 259
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286143 (508:01.68, 4465MB)

    3:49:46 PM #11 Text 0 File DlgWaitCD.cpp, Line 271
    Write in overburning mode: NO

    3:49:46 PM #12 Text 0 File DlgWaitCD.cpp, Line 2316
    Recorder: TOSHIBA CD/DVDW SD-R5372, Media type: DVD-R
    Disc Manufacturer: SONY16 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    3:49:46 PM #13 Text 0 File DlgWaitCD.cpp, Line 433
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    3:49:46 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [TOSHIBA CD/DVDW SD-R5372]
    --------------------------------------------------------------

    3:49:46 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [TOSHIBA CD/DVDW SD-R5372] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286144 | lead-out | 1 | 0x41 | 0x00

    3:49:46 PM #16 Phase 24 File APIProgress.cpp, Line 276
    Caching of files started

    3:49:46 PM #17 Text 0 File Burncd.cpp, Line 4040
    Cache writing successful.

    3:49:46 PM #18 Phase 25 File APIProgress.cpp, Line 276
    Caching of files completed

    3:49:46 PM #19 Phase 36 File APIProgress.cpp, Line 276
    Burn process started at 16x (22,160 KB/s)

    3:49:46 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    3:49:46 PM #21 Text 0 File DVDR.cpp, Line 2356
    Recording mode: Sequential Recording Mode

    3:49:46 PM #22 Text 0 File Mmc.cpp, Line 21206
    Set BUFE: Buffer underrun protection -> ON

    3:49:46 PM #23 Text 0 File DVDR.cpp, Line 2502
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    3:49:46 PM #24 Text 0 File Cdrdrv.cpp, Line 8442
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 30000 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    3:50:33 PM #25 TRANSFER -25 File Reader.cpp, Line 382
    Error reading data

    3:50:33 PM #26 Text 0 File Reader.cpp, Line 385
    Exception value: -1

    3:50:36 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    3:50:36 PM #28 Text 0 File DVDR.cpp, Line 2765
    EndDAO: Last written address was 91199

    3:52:11 PM #29 Phase 38 File APIProgress.cpp, Line 276
    Burn process failed at 16x (22,160 KB/s)

    3:52:11 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    3:52:11 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    Last edited: Jan 30, 2007
  2. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,447
    Likes Received:
    0
    Trophy Points:
    116
    Update your Nero, both packages, from here

    Package 1:
    http://www.dvdplusvideo.com/Nero-6.6.0.18_no_yt.exe
    Package 2:
    http://www.dvdplusvideo.com/NVE-3.1.0.21_no_yt.exe

    Later version of firmware TU56 available here

    http://www.toshiba-europe.com/storage/products/drivers/SD-R5372_EBTU56_WIN.zip

    Burning way too fast, slow to 4X
     
  3. 300bowler

    300bowler Regular member

    Joined:
    May 16, 2006
    Messages:
    1,773
    Likes Received:
    0
    Trophy Points:
    46
    Just to add,

    if all those solutions dont help(they should help), change to better media,

    Sonys are ok but u can't get better than Verbatims and Taiyo Yudens
     
    Last edited: Jan 31, 2007
  4. kaolani

    kaolani Member

    Joined:
    Jan 30, 2007
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    thanks for replying. I tried your suggestions. No success as of yet. I'll try to do some more research.
     
  5. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,447
    Likes Received:
    0
    Trophy Points:
    116
    If you've tried another burm and it failed then post that log so we have another look to see what is happening.
     
  6. kaolani

    kaolani Member

    Joined:
    Jan 30, 2007
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    I used Nero's simulation feature in an attempt to rule out the use of faulty media being the cause of the errors. I used Nero's cleanpack, and used nero's registry cleaner and then re-installed nero. Still get a burn error message. The burn progresses to about 4 percent then gives an "error reading data" message. What gets me is that prior to a couple of weeks ago, there was nothing I couldn't get around as far as burn errors. This was the latest log:

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 11:35:32 AM
    Nero Version: 6.6.0.8 (Nero Express)
    Recorder: <TOSHIBA CD/DVDW SD-R5372>Version: TU56 - HA 1 TA 0 - 6.6.0.8
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <TOSHIBA CD/DVDW SD-R5372>Version: TU56 - HA 1 TA 0 - 6.6.0.8
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD400EB-75CPF0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TOSHIBA CD/DVDW SD-R5372 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : SONY CD-RW CRX300E atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    TOSHIBA CD/DVDW SD-R5372 D: CDRom0
    SONY CD-RW CRX300E E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 766MB (784384kB)
    Free physical memory: 460MB (471176kB)
    Memory in use : 39 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    2.2.2007
    UDF/ISO compilation
    3:33:00 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    3:33:00 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    3:33:00 AM #3 Text 0 File Isodoc.cpp, Line 6172
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    3:33:00 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    3:33:00 AM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    3:33:00 AM #6 Text 0 File Writer.cpp, Line 122
    Writer TOSHIBA CD/DVDW SD-R5372 running

    3:33:00 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    3:33:00 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    3:33:00 AM #9 Text 0 File Burncd.cpp, Line 3153
    Turn on Disc-At-Once, using DVD media

    3:33:00 AM #10 Text 0 File DlgWaitCD.cpp, Line 259
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286143 (508:01.68, 4465MB)

    3:33:00 AM #11 Text 0 File DlgWaitCD.cpp, Line 271
    Write in overburning mode: NO (enabled: CD)

    3:33:00 AM #12 Text 0 File DlgWaitCD.cpp, Line 2316
    Recorder: TOSHIBA CD/DVDW SD-R5372, Media type: DVD-R
    Disc Manufacturer: SONY16 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    3:33:00 AM #13 Text 0 File DlgWaitCD.cpp, Line 433
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    3:33:00 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [TOSHIBA CD/DVDW SD-R5372]
    --------------------------------------------------------------

    3:33:00 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [TOSHIBA CD/DVDW SD-R5372] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286144 | lead-out | 1 | 0x41 | 0x00

    3:33:01 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    3:33:01 AM #17 Text 0 File Burncd.cpp, Line 4040
    Cache writing successful.

    3:33:01 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    3:33:01 AM #19 Phase 32 File dlgbrnst.cpp, Line 1832
    Simulation started at 16x (22,160 KB/s)

    3:33:01 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    3:33:01 AM #21 Text 0 File DVDR.cpp, Line 2356
    Recording mode: Sequential Recording Mode

    3:33:01 AM #22 Text 0 File Mmc.cpp, Line 21206
    Set BUFE: Buffer underrun protection -> ON

    3:33:01 AM #23 Text 0 File DVDR.cpp, Line 2502
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    3:33:01 AM #24 Text 0 File Cdrdrv.cpp, Line 8442
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 30000 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    3:34:16 AM #25 TRANSFER -25 File Reader.cpp, Line 382
    Error reading data

    3:34:16 AM #26 Text 0 File Reader.cpp, Line 385
    Exception value: -1

    3:34:19 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    3:34:19 AM #28 Text 0 File DVDR.cpp, Line 2765
    EndDAO: Last written address was 91199

    3:35:50 AM #29 Phase 35 File dlgbrnst.cpp, Line 1832
    Simulation aborted


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 6:00:00 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
  7. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,447
    Likes Received:
    0
    Trophy Points:
    116

    No you haven't

    This simulation burn indicates you are STILL using 6.6.0.8 so therefore you havent implemented the suggestions made, we can only OFFER fixes, it's up to you to implement them.
     
  8. kaolani

    kaolani Member

    Joined:
    Jan 30, 2007
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    Believe it or not I did install the updates you suggested but still received the error message. The log I just posted was the latest error message I was given AFTER uninstalling Nero, AGAIN. When I posted yesterday saying that I tried your suggestions I did not save the error log. I'm now reinstalling the updates you suggested to see if after wiping out my registry (which undoubtedly also uninstalled the updates you suggested) and reinstalling Nero I see a difference.
     
  9. kaolani

    kaolani Member

    Joined:
    Jan 30, 2007
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    here's the burn error message I got AFTER installing the updates you suggested, while burning at 4x.

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e
    (Nero Express)
    Recorder: <TOSHIBA CD/DVDW SD-R5372>Version: TU56 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <TOSHIBA CD/DVDW SD-R5372>Version: TU56 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD400EB-75CPF0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TOSHIBA CD/DVDW SD-R5372 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : SONY CD-RW CRX300E atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    TOSHIBA CD/DVDW SD-R5372 D: CDRom0
    SONY CD-RW CRX300E E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 766MB (784384kB)
    Free physical memory: 454MB (465528kB)
    Memory in use : 40 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    2.2.2007
    UDF/ISO compilation
    4:13:46 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    4:13:46 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    4:13:46 AM #3 Text 0 File Isodoc.cpp, Line 6359
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    4:13:46 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    4:13:47 AM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    4:13:47 AM #6 Text 0 File Writer.cpp, Line 122
    Writer TOSHIBA CD/DVDW SD-R5372 running

    4:13:47 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    4:13:47 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    4:13:47 AM #9 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    4:13:47 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286143 (508:01.68, 4465MB)

    4:13:47 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    4:13:47 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: TOSHIBA CD/DVDW SD-R5372, Media type: DVD-R
    Disc Manufacturer: SONY16 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    4:13:47 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    4:13:47 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [TOSHIBA CD/DVDW SD-R5372]
    --------------------------------------------------------------

    4:13:47 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [TOSHIBA CD/DVDW SD-R5372] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286144 | lead-out | 1 | 0x41 | 0x00

    4:13:47 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    4:13:48 AM #17 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    4:13:48 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    4:13:48 AM #19 Phase 32 File dlgbrnst.cpp, Line 1832
    Simulation started at 4x (5,540 KB/s)

    4:13:48 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    4:13:48 AM #21 Text 0 File DVDR.cpp, Line 2571
    Recording mode: Sequential Recording Mode

    4:13:48 AM #22 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: Buffer underrun protection -> ON

    4:13:48 AM #23 Text 0 File DVDR.cpp, Line 2726
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    4:13:48 AM #24 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 30000 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    4:16:22 AM #25 TRANSFER -25 File Reader.cpp, Line 382
    Error reading data

    4:16:22 AM #26 Text 0 File Reader.cpp, Line 385
    Exception value: -1

    4:16:22 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    4:16:22 AM #28 Text 0 File DVDR.cpp, Line 2969
    EndDAO: Last written address was 91199

    4:19:30 AM #29 Phase 34 File dlgbrnst.cpp, Line 1832
    Simulation failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 6:00:00 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
  10. kaolani

    kaolani Member

    Joined:
    Jan 30, 2007
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    and the error message after updating the driver for my dvdrw drive that only serves to enable a faster dvd r dl burning speed.

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e
    (Nero Express)
    Recorder: <TOSHIBA CD/DVDW SD-R5372>Version: TU56 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <TOSHIBA CD/DVDW SD-R5372>Version: TU56 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD400EB-75CPF0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TOSHIBA CD/DVDW SD-R5372 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : SONY CD-RW CRX300E atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    TOSHIBA CD/DVDW SD-R5372 D: CDRom0
    SONY CD-RW CRX300E E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 766MB (784384kB)
    Free physical memory: 434MB (445404kB)
    Memory in use : 43 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    2.2.2007
    UDF/ISO compilation
    4:33:08 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    4:33:08 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    4:33:08 AM #3 Text 0 File Isodoc.cpp, Line 6359
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    4:33:08 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    4:33:08 AM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    4:33:08 AM #6 Text 0 File Writer.cpp, Line 122
    Writer TOSHIBA CD/DVDW SD-R5372 running

    4:33:08 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    4:33:08 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    4:33:09 AM #9 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    4:33:37 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286143 (508:01.68, 4465MB)

    4:33:37 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    4:33:37 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: TOSHIBA CD/DVDW SD-R5372, Media type: DVD-R
    Disc Manufacturer: SONY16 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    4:33:37 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.)

    4:33:37 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [TOSHIBA CD/DVDW SD-R5372]
    --------------------------------------------------------------

    4:33:37 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [TOSHIBA CD/DVDW SD-R5372] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286144 | lead-out | 1 | 0x41 | 0x00

    4:33:37 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    4:33:37 AM #17 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    4:33:37 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    4:33:37 AM #19 Phase 32 File dlgbrnst.cpp, Line 1832
    Simulation started at 16x (22,160 KB/s)

    4:33:37 AM #20 SCSI -1080 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03816400
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x3A
    Sense Qual: 0x00
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
    Sense Data: 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x3A 0x00

    4:33:37 AM #21 SCSI -1080 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03815E00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x3A
    Sense Qual: 0x00
    CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x3A 0x00

    4:33:37 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    4:33:38 AM #23 Text 0 File DVDR.cpp, Line 2571
    Recording mode: Sequential Recording Mode

    4:33:38 AM #24 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: Buffer underrun protection -> ON

    4:33:38 AM #25 Text 0 File DVDR.cpp, Line 2726
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    4:33:38 AM #26 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 30000 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    4:35:18 AM #27 TRANSFER -25 File Reader.cpp, Line 382
    Error reading data

    4:35:18 AM #28 Text 0 File Reader.cpp, Line 385
    Exception value: -1

    4:35:21 AM #29 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    4:35:21 AM #30 Text 0 File DVDR.cpp, Line 2969
    EndDAO: Last written address was 91775

    4:38:27 AM #31 Phase 34 File dlgbrnst.cpp, Line 1832
    Simulation failed at 16x (22,160 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 6:00:00 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
  11. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,447
    Likes Received:
    0
    Trophy Points:
    116
    What is the source of the files you are attempting to burn.

    BTW: You are still trying to burn at 16X
     
    Last edited: Feb 2, 2007
  12. kaolani

    kaolani Member

    Joined:
    Jan 30, 2007
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    after dvdr drivers installed and at 4x

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e
    (Nero Express)
    Recorder: <TOSHIBA CD/DVDW SD-R5372>Version: TU56 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <TOSHIBA CD/DVDW SD-R5372>Version: TU56 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD400EB-75CPF0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TOSHIBA CD/DVDW SD-R5372 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : SONY CD-RW CRX300E atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    TOSHIBA CD/DVDW SD-R5372 D: CDRom0
    SONY CD-RW CRX300E E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 766MB (784384kB)
    Free physical memory: 450MB (461764kB)
    Memory in use : 41 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    2.2.2007
    UDF/ISO compilation
    4:44:27 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    4:44:27 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    4:44:27 AM #3 Text 0 File Isodoc.cpp, Line 6359
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    4:44:27 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    4:44:27 AM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    4:44:27 AM #6 Text 0 File Writer.cpp, Line 122
    Writer TOSHIBA CD/DVDW SD-R5372 running

    4:44:27 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    4:44:27 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    4:44:27 AM #9 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    4:44:58 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286143 (508:01.68, 4465MB)

    4:44:58 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    4:44:58 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: TOSHIBA CD/DVDW SD-R5372, Media type: DVD-R
    Disc Manufacturer: SONY16 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    4:44:58 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.)

    4:44:58 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [TOSHIBA CD/DVDW SD-R5372]
    --------------------------------------------------------------

    4:44:58 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [TOSHIBA CD/DVDW SD-R5372] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286144 | lead-out | 1 | 0x41 | 0x00

    4:44:58 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    4:44:58 AM #17 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    4:44:58 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    4:44:58 AM #19 Phase 32 File dlgbrnst.cpp, Line 1832
    Simulation started at 4x (5,540 KB/s)

    4:44:58 AM #20 SCSI -1080 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03816400
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x3A
    Sense Qual: 0x00
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
    Sense Data: 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x3A 0x00

    4:44:58 AM #21 SCSI -1080 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03815E00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x3A
    Sense Qual: 0x00
    CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x3A 0x00

    4:44:58 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    4:44:59 AM #23 Text 0 File DVDR.cpp, Line 2571
    Recording mode: Sequential Recording Mode

    4:44:59 AM #24 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: Buffer underrun protection -> ON

    4:44:59 AM #25 Text 0 File DVDR.cpp, Line 2726
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    4:44:59 AM #26 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 30000 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    4:45:59 AM #27 TRANSFER -25 File Reader.cpp, Line 382
    Error reading data

    4:45:59 AM #28 Text 0 File Reader.cpp, Line 385
    Exception value: -1

    4:45:59 AM #29 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    4:45:59 AM #30 Text 0 File DVDR.cpp, Line 2969
    EndDAO: Last written address was 91871

    4:49:05 AM #31 Phase 34 File dlgbrnst.cpp, Line 1832
    Simulation failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 6:00:00 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
  13. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,447
    Likes Received:
    0
    Trophy Points:
    116
    Once again, what is the source of the files you are attempting to burn.
     
  14. kaolani

    kaolani Member

    Joined:
    Jan 30, 2007
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    the source being dvd files I had previously successfully written to disc. I also tried moving the files to different drives. I have external and internal drives. No success.
     
  15. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,447
    Likes Received:
    0
    Trophy Points:
    116
    OK so the files are already written to DVD and you are trying to back them up,from this DVD, is this correct
     
  16. kaolani

    kaolani Member

    Joined:
    Jan 30, 2007
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    No. I have the dvd files on my hard drive. I previously (approximately 2 weeks ago) copied the dvd files from my hd to a blank dvd media successfully. I still have the dvd files on my hd and they are what I was attempting to write to disc in the error logs I posted to this board.
     
  17. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,447
    Likes Received:
    0
    Trophy Points:
    116
    OK if you still had the DVD I was going to suggest using Nero Recode to back them up, sorry I cannot explain why it is failing. Do you have a RW DVD that you can try to burn these files to...saves wasting so many discs.
     
  18. garmoon

    garmoon Regular member

    Joined:
    Oct 7, 2004
    Messages:
    3,971
    Likes Received:
    0
    Trophy Points:
    46
    Since you say you've tried to move these files and can't, they may have been corrupted somewhere along the line since they were created. Can you rip another dvd and burn it? Or is it just these files you can't? Nero may be working fine.
     
  19. kaolani

    kaolani Member

    Joined:
    Jan 30, 2007
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    haha. No I meant to say that I copied the dvd files from one drive, which I am fairly sure are not corrupted, to another drive in an attempt to rule out the drive somehow being the problem (unless all my drives are corrupt which I doubt as I have had no other problems with them and after running scandisk on them having no errors reported). I also attempted using different dvd files/different movies. No success. I think my next step is going to be to replace my dvdr drive and see if that doesn't fix the problem.

    Again, thanks for the suggestions.
     
    Last edited: Feb 2, 2007
  20. garmoon

    garmoon Regular member

    Joined:
    Oct 7, 2004
    Messages:
    3,971
    Likes Received:
    0
    Trophy Points:
    46
    That'll probably remedy the problem. Replacing burner. Cheap burners @newegg.com
     

Share This Page