Can some one look at this log and maybe give me an idea why i cannot burn anything to disc? These are a new batch of DVD media i have been using. They burn ok on my laptop with Nero but so far havent burned on my desktop PC. Maybe i have a setting wrong or something? Here is the log: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34 Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e Recorder: <PHILIPS DVDR1660P1> Version: P1.3 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <PHILIPS DVDR1660P1 >Version: P1.3 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD2000BB-00GUC0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : PHILIPS DVDR1660P1 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === PHILIPS DVDR1660P1 D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 959MB (982508kB) Free physical memory: 381MB (390428kB) Memory in use : 60 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 15.3.2007 UDF/ISO compilation 12:51:13 #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 12:51:13 #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 12:51:13 #3 Text 0 File Isodoc.cpp, Line 6359 UDF document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : TRUE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 12:51:13 #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 12:51:13 #5 Text 0 File Reader.cpp, Line 127 Reader running 12:51:13 #6 Text 0 File Writer.cpp, Line 122 Writer PHILIPS DVDR1660P1 running 12:51:13 #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:51:14 #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:51:14 #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 12:51:14 #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1397535 (310:33.60, 2729MB) 12:51:14 #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD DVD) 12:51:14 #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PHILIPS DVDR1660P1, Media type: DVD-R Disc Manufacturer: MCC 03 - RG20 Disc Application Code: 64, Disc Physical Code: 193 12:51:14 #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:51:14 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1397536 (1397536) = #1397536/310:33.61 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1397536 blocks [PHILIPS DVDR1660P1] -------------------------------------------------------------- 12:51:14 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PHILIPS DVDR1660P1] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2862153728, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1397536 | lead-out | 1 | 0x41 | 0x00 12:51:14 #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 12:51:14 #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 12:51:14 #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 12:51:14 #19 Phase 28 File dlgbrnst.cpp, Line 1832 Speed measurement started 12:51:14 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:52:57 #21 Text 0 File WriterStatus.cpp, Line 116 <PHILIPS DVDR1660P1 > start writing Lead-Out at LBA 1397536 (155320h), lenght 0 blocks 12:52:57 #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:52:57 #23 Phase 29 File dlgbrnst.cpp, Line 1781 Speed measurement completed: 20.6x (28,516 KB/s) 12:52:57 #24 Phase 32 File dlgbrnst.cpp, Line 1832 Simulation started at 16x (22,160 KB/s) 12:53:03 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:53:03 #26 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode 12:53:03 #27 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON 12:53:03 #28 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: Yes 12:53:03 #29 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:56:46 #30 Text 0 File WriterStatus.cpp, Line 116 <PHILIPS DVDR1660P1 > start writing Lead-Out at LBA 1397536 (155320h), lenght 0 blocks 12:56:46 #31 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:56:46 #32 Text 0 File DVDR.cpp, Line 2969 EndDAO: Last written address was 1397535 12:57:23 #33 Phase 33 File dlgbrnst.cpp, Line 1832 Simulation completed successfully at 16x (22,160 KB/s) 12:57:24 #34 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 16x (22,160 KB/s) 12:57:24 #35 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:57:24 #36 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode 12:57:24 #37 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON 12:57:24 #38 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: Yes 12:57:24 #39 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:58:06 #40 SCSI -1135 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03570000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x0C 0x00 12:58:06 #41 CDR -1135 File Writer.cpp, Line 311 Write error 12:58:06 #42 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:58:06 #43 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 12:58:06 #44 Text 0 File DVDR.cpp, Line 2969 EndDAO: Last written address was -1 12:58:06 #45 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 16x (22,160 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 18/08/2001 04:07:32 File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 25/08/2006 03:47:00 File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 27/09/2006 21:53:22 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:44 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hello. Reduce your burn speed to 8X. 16X is probably too fast. A good rule of thumb for successful quality burns is to burn at half or less the rated speed of the media. I don't know if your burner firmware is up to date. There are several models of this burner. Was this included with your system?
Yes laddyboy this burner came with my system. I have tried previously burning at the lowest speed with still no success.
I'm with laddyboy on this one, check for firmware update and then there's this You have Roxio installed, it clashes with Nero, to remove, run this zapper http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
