1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Burn process failed several times in Nero 6.6.0.18

Discussion in 'Nero discussion' started by militantm, Jun 4, 2007.

  1. militantm

    militantm Member

    Joined:
    May 22, 2004
    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    16
    I cannot get a disc to complete burning in Nero 6. I've attempted bruing some of my own video files as well as files I've backed up. I was able to copy a disc from a recent successful burn but, I cannot seem to successfully burn files from my hard drive as well as files I recently added to the hard drive today. I've defragmented that did not work, so tried uninstalling and re-installing Nero, same deal. I've been told in these forums in the past to update my firmware but the only firmware available is generic and since the drive has worked fine in the past I saw no reason to update. I was also recommended to use this version of Nero 6 as well, as it more stable than the most recent update to nero 6. The log history file is below, please help.

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=2.0.0.0, size=17920 bytes, created 1/31/2005 4:05:30 PM
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e

    Recorder: <HL-DT-ST DVD-RW GWA-4040B>Version: A112 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 1 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-RW GWA-4040B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-RW GWA-4040B E: CDRom0
    HL-DT-ST DVD-ROM GDR8162B F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1023MB (1047916kB)
    Free physical memory: 610MB (625176kB)
    Memory in use : 40
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    4.6.2007
    UDF/ISO compilation
    4:47:34 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    4:47:34 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    4:47:34 PM #3 Text 0 File Isodoc.cpp, Line 6359
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    4:47:34 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    4:47:34 PM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    4:47:34 PM #6 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVD-RW GWA-4040B running

    4:47:34 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    4:47:34 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    4:47:34 PM #9 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    4:47:35 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1709535 (379:53.60, 3338MB)

    4:47:35 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    4:47:35 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: HL-DT-ST DVD-RW GWA-4040B, Media type: DVD-R
    Disc Manufacturer: MCC 03 - RG20
    Disc Application Code: 64, Disc Physical Code: 193

    4:47:35 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    4:47:35 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1709536 (1709536) = #1709536/379:53.61
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1709536 blocks [HL-DT-ST DVD-RW GWA-4040B]
    --------------------------------------------------------------

    4:47:35 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [HL-DT-ST DVD-RW GWA-4040B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3501129728, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1709536 | lead-out | 1 | 0x41 | 0x00

    4:47:35 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    4:47:35 PM #17 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    4:47:35 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    4:47:35 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 2x (2,770 KB/s)

    4:47:35 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    4:47:35 PM #21 Text 0 File DVDR.cpp, Line 2571
    Recording mode: Sequential Recording Mode

    4:47:35 PM #22 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: Buffer underrun protection -> ON

    4:47:35 PM #23 Text 0 File DVDR.cpp, Line 2726
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    4:47:35 PM #24 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    4:47:43 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
    16:47:43.546 - HL-DT-ST DVD-RW GWA-4040B\H1 T0 : Queue again later

    4:59:25 PM #26 SCSI -1114 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03FA0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x06 (KEY_UNIT_ATTENTION)
    Sense Code: 0x29
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x0D 0xAE 0x20 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x10
    0x00 0x00 0x00 0x0C 0x29 0x00

    4:59:25 PM #27 CDR -1114 File Writer.cpp, Line 311
    Reset occurred

    4:59:25 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    4:59:25 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    4:59:26 PM #30 Text 0 File DVDR.cpp, Line 2969
    EndDAO: Last written address was 896543

    4:59:28 PM #31 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM
    File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 10/23/2006 11:26:34 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
     
    Last edited: Jun 4, 2007
  2. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Hi militantm
    1st thing I'd edit out your name and serial # in these logs.
    The serial # is at the top of each log along w/ your name and begins w/ 1A.

    In the 2 failed logs your getting these errors - Reset occurred
    & KEY_UNIT_ATTENTION
    These could mean the drive itself or something is conflicting.
    Anything change pc wise since you were last able to burn?

    Try another burn program. Here's a good free one - ImgBurn. Use the build mode to add the files to burn.

    2x is a bit too slow for 16x media - try 4x but I'd try 8x.

    Here's the latest firmware for the drive - A114 from 9/05. I'd update it may help. One thing it does is update the media codes to give the drive the proper write strategy. The is especially good for newer media like 16x.
     
  3. militantm

    militantm Member

    Joined:
    May 22, 2004
    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    16
    thanks binkie7 I may have posted the wrong log I have recently edited my post, can you please take a look again. here's the log, I hope posting it twice isn't overkill. I have been pointed to that firmware update in the past. are you positive thats the correct one for my burner? I've be hesitent about firmware updates, Ive heard it diffcult to tell exactly which drive sony put in the vaio I have and I don't want to screw up my drive. fyi I can't burn faster than 2x with this drive and I've had great results with these 16x verbatim in the past as recently as this past weekend. I burned like 6 or 7 in row successfully then I started hitting the process failed error so as I mentioned I resorted to copying one of the succsessfully burned discs directly from one drive to the burner and no problems. today I attempted to burn some vob I had backed up on the hard drive and same crap burn proccess failed. this is log is from the vob's I attempted to burn after re installing nero.

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=2.0.0.0, size=17920 bytes, created 1/31/2005 4:05:30 PM
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e

    Recorder: <HL-DT-ST DVD-RW GWA-4040B>Version: A112 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 1 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-RW GWA-4040B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-RW GWA-4040B E: CDRom0
    HL-DT-ST DVD-ROM GDR8162B F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1023MB (1047916kB)
    Free physical memory: 610MB (625176kB)
    Memory in use : 40
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    4.6.2007
    UDF/ISO compilation
    4:47:34 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    4:47:34 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    4:47:34 PM #3 Text 0 File Isodoc.cpp, Line 6359
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    4:47:34 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    4:47:34 PM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    4:47:34 PM #6 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVD-RW GWA-4040B running

    4:47:34 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    4:47:34 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    4:47:34 PM #9 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    4:47:35 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1709535 (379:53.60, 3338MB)

    4:47:35 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    4:47:35 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: HL-DT-ST DVD-RW GWA-4040B, Media type: DVD-R
    Disc Manufacturer: MCC 03 - RG20
    Disc Application Code: 64, Disc Physical Code: 193

    4:47:35 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    4:47:35 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1709536 (1709536) = #1709536/379:53.61
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1709536 blocks [HL-DT-ST DVD-RW GWA-4040B]
    --------------------------------------------------------------

    4:47:35 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [HL-DT-ST DVD-RW GWA-4040B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3501129728, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1709536 | lead-out | 1 | 0x41 | 0x00

    4:47:35 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    4:47:35 PM #17 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    4:47:35 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    4:47:35 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 2x (2,770 KB/s)

    4:47:35 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    4:47:35 PM #21 Text 0 File DVDR.cpp, Line 2571
    Recording mode: Sequential Recording Mode

    4:47:35 PM #22 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: Buffer underrun protection -> ON

    4:47:35 PM #23 Text 0 File DVDR.cpp, Line 2726
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    4:47:35 PM #24 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    4:47:43 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
    16:47:43.546 - HL-DT-ST DVD-RW GWA-4040B\H1 T0 : Queue again later

    4:59:25 PM #26 SCSI -1114 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03FA0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x06 (KEY_UNIT_ATTENTION)
    Sense Code: 0x29
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x0D 0xAE 0x20 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x10
    0x00 0x00 0x00 0x0C 0x29 0x00

    4:59:25 PM #27 CDR -1114 File Writer.cpp, Line 311
    Reset occurred

    4:59:25 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    4:59:25 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    4:59:26 PM #30 Text 0 File DVDR.cpp, Line 2969
    EndDAO: Last written address was 896543

    4:59:28 PM #31 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM
    File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 10/23/2006 11:26:34 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
     
  4. militantm

    militantm Member

    Joined:
    May 22, 2004
    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    16
    here are two I did back to back this weekend before defrag, the first one is successful the second failed, what's the difference here? I forgot to mention I have made no changes to my pc other than defrag and recently today uninstall and re install nero.

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=2.0.0.0, size=17920 bytes, created 1/31/2005 4:05:30 PM
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e

    Recorder: <HL-DT-ST DVD-RW GWA-4040B>Version: A112 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 1 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-RW GWA-4040B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-RW GWA-4040B E: CDRom0
    HL-DT-ST DVD-ROM GDR8162B F: CDRom1
    NERO IMAGEDRIVE2 J: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1023MB (1047916kB)
    Free physical memory: 558MB (572028kB)
    Memory in use : 45
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    3.6.2007
    UDF/ISO compilation
    8:31:52 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    8:31:52 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    8:31:52 AM #3 Text 0 File Isodoc.cpp, Line 6359
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    8:31:52 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    8:31:52 AM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    8:31:52 AM #6 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVD-RW GWA-4040B running

    8:31:52 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    8:31:52 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    8:31:52 AM #9 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    8:31:53 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 426943 ( 94:52.43, 833MB)

    8:31:53 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    8:31:53 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: HL-DT-ST DVD-RW GWA-4040B, Media type: DVD-R
    Disc Manufacturer: MCC 03 - RG20
    Disc Application Code: 64, Disc Physical Code: 193

    8:31:53 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    8:31:53 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 426944 (426944) = #426944/94:52.44
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 426944 blocks [HL-DT-ST DVD-RW GWA-4040B]
    --------------------------------------------------------------

    8:31:53 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [HL-DT-ST DVD-RW GWA-4040B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 874381312, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    426944 | lead-out | 1 | 0x41 | 0x00

    8:31:53 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    8:31:53 AM #17 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    8:31:53 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    8:31:53 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 2x (2,770 KB/s)

    8:31:53 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    8:31:53 AM #21 Text 0 File DVDR.cpp, Line 2571
    Recording mode: Sequential Recording Mode

    8:31:53 AM #22 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: Buffer underrun protection -> ON

    8:31:53 AM #23 Text 0 File DVDR.cpp, Line 2726
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    8:31:53 AM #24 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    8:32:01 AM #25 Text 0 File Cdrdrv.cpp, Line 1288
    08:32:01.437 - HL-DT-ST DVD-RW GWA-4040B\H1 T0 : Queue again later

    8:36:34 AM #26 SCSI -1114 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03FF0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x06 (KEY_UNIT_ATTENTION)
    Sense Code: 0x29
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x04 0xD1 0x40 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x10
    0x00 0x00 0x00 0x0C 0x29 0x00

    8:36:34 AM #27 CDR -1114 File Writer.cpp, Line 311
    Reset occurred

    8:36:34 AM #28 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    8:36:34 AM #29 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    8:36:35 AM #30 Text 0 File DVDR.cpp, Line 2969
    EndDAO: Last written address was 315711

    8:36:37 AM #31 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM
    File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 10/23/2006 11:26:34 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=2.0.0.0, size=17920 bytes, created 1/31/2005 4:05:30 PM
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e

    Recorder: <HL-DT-ST DVD-RW GWA-4040B>Version: A112 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 1 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-RW GWA-4040B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-RW GWA-4040B E: CDRom0
    HL-DT-ST DVD-ROM GDR8162B F: CDRom1
    NERO IMAGEDRIVE2 J: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1023MB (1047916kB)
    Free physical memory: 572MB (586280kB)
    Memory in use : 44
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    3.6.2007
    DVD-Copy on the fly
    8:38:16 AM #1 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    8:38:16 AM #2 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert the original disc.
    (Medium in drive: Unknown. Medium required by compilation: DVD.)

    8:38:17 AM #3 Text 0 File Reader.cpp, Line 127
    Reader running

    8:38:17 AM #4 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVD-RW GWA-4040B running

    8:38:17 AM #5 Text 0 File DVDCopy.cpp, Line 293
    DVD Track-Information from source disc:
    Media Type: DVD-R
    S01 T01 Con 0x04 Start 0 Len 426944 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

    8:38:17 AM #6 Text 0 File DVDCopy.cpp, Line 406
    Max -1 tracks of 1 allowed to copy
    1: 0 - 426944 = 426944, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

    8:38:17 AM #7 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    8:38:17 AM #8 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 426943 ( 94:52.43, 833MB)

    8:38:17 AM #9 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    8:38:17 AM #10 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: HL-DT-ST DVD-RW GWA-4040B, Media type: DVD-R
    Disc Manufacturer: MCC 03 - RG20
    Disc Application Code: 64, Disc Physical Code: 193

    8:38:17 AM #11 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    8:38:17 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - Data (mode 1))
    2 indices, index0 (150) not provided
    original disc pos #0 + 426944 (426944) = #426944/94:52.44
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 426944 blocks [HL-DT-ST DVD-RW GWA-4040B]
    --------------------------------------------------------------

    8:38:17 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [HL-DT-ST DVD-RW GWA-4040B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 874381312, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    426944 | lead-out | 1 | 0x41 | 0x00

    8:38:17 AM #14 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 2x (2,770 KB/s)

    8:38:18 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    8:38:18 AM #16 Text 0 File DVDR.cpp, Line 2571
    Recording mode: Sequential Recording Mode

    8:38:18 AM #17 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: Buffer underrun protection -> ON

    8:38:18 AM #18 Text 0 File DVDR.cpp, Line 2726
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    8:38:18 AM #19 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    8:38:46 AM #20 Text 0 File Cdrdrv.cpp, Line 1288
    08:38:46.515 - HL-DT-ST DVD-RW GWA-4040B\H1 T0 : Queue again later

    8:44:41 AM #21 Text 0 File WriterStatus.cpp, Line 116
    <HL-DT-ST DVD-RW GWA-4040B> start writing Lead-Out at LBA 426944 (683C0h), lenght 0 blocks

    8:44:42 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    8:44:42 AM #23 Text 0 File DVDR.cpp, Line 2969
    EndDAO: Last written address was 426943

    8:46:02 AM #24 Phase 37 File dlgbrnst.cpp, Line 1832
    Burn process completed successfully at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM
    File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 10/23/2006 11:26:34 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  5. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Not much of a difference in the logs - just the errors on the ones that fail - reset and key unit attention.

    Oops sorry about suggesting 8x - 4x is max on this drive.
    You can try the firmware update - the one I listed is for oem drives which this one is.

    The drive is older and is probably on it's way out so I would try the update. But personally I think your best bet may be to pick up a new drive. They are so much cheaper now.

    Give ImgBurn a shot to make sure not some sort of conflict with Nero.
     
  6. militantm

    militantm Member

    Joined:
    May 22, 2004
    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    16
    new firmware wont take, cannot find target drive message, guide is in japanese. can you help with this?
     
  7. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Yeah that firmware is a little funky looking there.
    Try the A113 - not as new but may help some.

    Here's a link on your drive for others that had problems w/ it - link
     
  8. militantm

    militantm Member

    Joined:
    May 22, 2004
    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    16
    I did have successful burn today but, another coaster right behind it. same deal in the log too, reset occurred. I tried cleaning the lens and I'm not sure what effect it had since a good one then a bad one. think that intermitent behavior is sign the drive is crapping out? I still don't get why it will copy from one disc to another but not from files on the hard disk.
     
  9. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Yep intermittent could be the drive.
    The media id for the 16x verbs which gives the drive the proper write strategy is probably not loaded in the firmware. So the drive will use a generic write strategy and doesn't always work.
    But your also getting the hardware errors in the log.

    Did you try ImgBurn and see if that made a diff? I try that too.

    Another thing to try since it's failing burning from the hard drive is check the hard drive - just in case. It's good to do this every so often anyhow.
    Run a ChkDsk - can take awhile depending on how filled up the hard drive is and if any errors are found. Here's a guide.
     
  10. militantm

    militantm Member

    Joined:
    May 22, 2004
    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    16
    same deal with imgbrn, said some type of reset occurred. if I get one to finish with imgbrn will that playback in my dvd player? you said to use build mode, create and image (iso?) then burn that to disc correct? I'll try ChkDsk as well. I'm pretty sure you're correct about the write strategy too. what should get if I decide to replace this sucker? are external drives dependable? I would rather just plug something in and go from there.
     
  11. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Yep you did ImgBurn right.
    Yes it would play in a dvd player if you can get one to burn - so you're ok there.
    Externals are good and reliable. Ones to look at would be LiteOn or Pioneer. if you're in the US check out newegg. Good deals and fast shipping.

    Keep us posted!
     

Share This Page