Hello, I just got some new Taiyo Yuden DVD+R and I been getting burn errors with them. I am not sure if the issue is my firmware, I believe it up to date, or is the issue is with Nero. I never in the past had this kind of problem, and that included burning with lower quality media. I am wondering by posting my error log someone might be able to help me out. Thanks in advance. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.5.1.1 Internal Version: 7, 5, 1, 1 Recorder: <BENQ DVD DD DW1650> Version: BCIC - HA 1 TA 1 - 7.5.1.1 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TOSHIBA CD/DVDW SD-R5372>Version: TU55 - HA 1 TA 0 - 7.5.1.1 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : ST380012A atapi Port 0 ID 0 DMA: On CdRomPeripheral : TOSHIBA CD/DVDW SD-R5372 atapi Port 1 ID 0 DMA: On CdRomPeripheral : BENQ DVD DD DW1650 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === TOSHIBA CD/DVDW SD-R5372 D: CDRom0 BENQ DVD DD DW1650 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 629MB (644992kB) Memory in use : 38 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 15.2.2007 UDF/ISO compilation 3:51:45 PM #1 Phase 112 File dlgbrnst.cpp, Line 1730 DVD-Video files reallocation started 3:51:45 PM #2 Phase 114 File dlgbrnst.cpp, Line 1730 DVD-Video files reallocation completed (no file modified) 3:51:45 PM #3 Text 0 File Isodoc.cpp, Line 6510 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 3:51:45 PM #4 Phase 111 File dlgbrnst.cpp, Line 1730 DVD-Video files sorted 3:51:45 PM #5 Text 0 File ThreadedTransfer.cpp, Line 540 ReadBuffer-Pipe got 81920KB of Memory 3:51:45 PM #6 Text 0 File Reader.cpp, Line 126 Reader running 3:51:45 PM #7 Text 0 File Writer.cpp, Line 123 Writer E: BENQ DVD DD DW1650 running 3:51:45 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3313 First writeable address = 0 (0x00000000) 3:51:45 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3313 First writeable address = 0 (0x00000000) 3:51:45 PM #10 Text 0 File Burncd.cpp, Line 3443 Turn on Disc-At-Once, using DVD media 3:51:45 PM #11 Text 0 File DlgWaitCD.cpp, Line 300 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2282959 (507:19.34, 4458MB) 3:51:45 PM #12 Text 0 File DlgWaitCD.cpp, Line 312 Write in overburning mode: NO (enabled: CD) 3:51:45 PM #13 Text 0 File DlgWaitCD.cpp, Line 2851 Recorder: BENQ DVD DD DW1650, Media type: DVD+R 3:51:45 PM #14 Text 0 File DlgWaitCD.cpp, Line 484 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:51:45 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 863 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2282960 (2282960) = #2282960/507:19.35 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2282960 blocks [E: BENQ DVD DD DW1650] -------------------------------------------------------------- 3:51:45 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1079 Prepare recorder [E: BENQ DVD DD DW1650] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4675502080, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2282960 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2282960 | 0 | 0x00 2282960 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 3:51:45 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 3:51:45 PM #18 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 3:51:45 PM #19 Text 0 File Burncd.cpp, Line 4274 Cache writing successful. 3:51:45 PM #20 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 3:51:45 PM #21 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5,540 KB/s) 3:51:45 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2746 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:51:45 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 291 E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 Buffer x063c0200: Len x804 3:51:45 PM #24 Text 0 File DVDR.cpp, Line 6930 Drive: BENQ DVD DD DW1650 Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 3:51:45 PM #25 CDR -1211 File DVDR.cpp, Line 6002 Book Type set to: DVD-ROM 3:51:45 PM #26 Text 0 File DVDPlusRW.cpp, Line 662 Start write address at LBA 0 DVD high compatibility mode: Yes 4:05:13 PM #27 SPTI -1135 File SCSIPassThrough.cpp, Line 291 E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 1D 3B 20 00 00 20 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 12 00 00 00 00 0C Buffer x058a0000: Len x10000 0x00 00 01 BA 44 05 2D B7 DC D1 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 00 4D 61 10 14 86 13 08 48 08 0x40 68 04 B1 0E 01 32 0B 26 93 01 0C 01 49 00 12 4:05:13 PM #28 CDR -1135 File Writer.cpp, Line 312 Write error E: BENQ DVD DD DW1650 4:05:13 PM #29 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 4:05:13 PM #30 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 4:05:54 PM #31 Text 0 File DVDR.cpp, Line 6930 Drive: BENQ DVD DD DW1650 Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 4:05:54 PM #32 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/18/2006 2:34:55 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I have tried this version and didnt like it, too many errors, so I upgraded to 7.5.9.0 from here http://www.filehippo.com/download_nero_7_premium/?1881 Firmware is current so that shouldnt pose any problems, only thing I can suggest is upgrade Nero...otherwise things look OK.
I have upgraded to Nero 7.7.5.1 had one DVD burn flawlessly, except it is taking a long time to burn at 4x. Burns are now taking 20 minutes instead of the 12 to 13 minutes I used to see. The second disc became a coaster. I am wondering if there might be something that is causing my burns to take longer, and could this perhaps be the problem, or can anyone think of anything else I might check into. Thanks again for any input.
Why not post your Nero history log of the failed burn, I have yet to upgrade to latest version, I will stick with 7.5.9.0
You know I ran a virus scan on my computer and something has seriously effected my computer. I am thinking this is the cause of my problems. Thanks for the input, I will keep people informed on what happens next.
One last thing, still hoping someone can help or offer some info on this. Like I mentioned before I am using new Taiyo Yuden disc. They are inject printable which allows me to print on the hub. Could this be the issue? I am only wondering this because I tried with great success to burn with some Memorex disc and it burned flawlessly, and I am about to try with some silver labeled Taiyo Yudens that are not hub printable. I am wondering if anyone think that the printable hub could be the issue? Thanks in advance for all the help and suggestions I have received.
Have you got that Benq1650 set up with qsuite. I have 2 of those burners, they love 8X TYs+Rs, don't know about 16X +Rs. Your firmware is upto date. Try burning them @ 8X and then @16X if 8 unsuccessful. I burn my 8XTY+Rs @8X. Always successful.
