1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Burning Failed!

Discussion in 'DVD2One forum' started by linnm666, Dec 2, 2004.

  1. linnm666

    linnm666 Guest

    The program has been working perfactly till yesterday; now I am getting nothing but coasters. I reloaded the program and now it burns at 2.4 instead of 4rpm and I get this message
    Any thoght please advise.

    Linn


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/6/2002 10:01:14 AM
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 3:51:12 PM
    Nero API version: 6.6.0.1
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom

    === Scsi-Device-Map ===
    DiskPeripheral : ST340810A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : LITE-ON LTR-40125S atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : VOBID InstantDrive CD 14 VOBID Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    LITE-ON LTR-40125S D: CDRom0
    VOBID InstantDrive CD G: CDRom1
    PIONEER DVD-RW DVR-106D F: CDRom2
    =======================

    AutoRun : 0
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (260528kB)
    Free physical memory: 115MB (118488kB)
    Memory in use : 54 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    3.12.2004
    NeroAPI
    12:36:58 AM #1 Text 0 File NeroBurnCommon.cpp, Line 66
    Message file not found


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 5:07:32 PM
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/6/2002 10:01:08 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.02.42a, size=17184 bytes, created 11/27/2003 11:04:54 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
  2. linnm666

    linnm666 Guest

    i am also getting this error


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/6/2002 10:01:14 AM
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM
    Nero API version: 6.6.0.1
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.08 - HA 3 TA 0 - 6.6.0.1
    Adapter driver: <> HA 3
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : ST340810A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : LITE-ON LTR-40125S atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : VOBID InstantDrive CD 14 VOBID Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    LITE-ON LTR-40125S D: CDRom0
    VOBID InstantDrive CD G: CDRom1
    PIONEER DVD-RW DVR-106D F: CDRom2
    =======================

    AutoRun : 0
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (260528kB)
    Free physical memory: 76MB (77824kB)
    Memory in use : 70 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    3.12.2004
    NeroAPI
    1:20:16 PM #1 Phase 112 File APIProgress.cpp, Line 276
    DVD-Video files reallocation started

    1:20:19 PM #2 Phase 114 File APIProgress.cpp, Line 276
    DVD-Video files reallocation completed (no file modified)

    1:20:19 PM #3 Phase 111 File APIProgress.cpp, Line 276
    DVD-Video files sorted

    1:20:20 PM #4 Text 0 File Reader.cpp, Line 127
    Reader running

    1:20:20 PM #5 Text 0 File Writer.cpp, Line 122
    Writer PIONEER DVD-RW DVR-106D running

    1:20:20 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    1:20:20 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    1:20:20 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    1:20:21 PM #9 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-At-Once, using DVD media

    1:20:23 PM #10 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2090159 (464:28.59, 4082MB)

    1:20:23 PM #11 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO

    1:20:23 PM #12 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: PIONEER DVD-RW DVR-106D, Media type: DVD+R
    Disc Manufacturer ID: AML, Media Type ID: 001, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 1

    1:20:23 PM #13 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    1:20:23 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2090160 (2090160) = #2090160/464:28.60
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2090160 blocks [PIONEER DVD-RW DVR-106D]
    --------------------------------------------------------------

    1:20:23 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [PIONEER DVD-RW DVR-106D] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4280647680, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2090160 | lead-out | 1 | 0x00 | 0x41

    1:20:26 PM #16 Phase 24 File APIProgress.cpp, Line 276
    Caching of files started

    1:20:26 PM #17 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    1:20:26 PM #18 Phase 25 File APIProgress.cpp, Line 276
    Caching of files completed

    1:20:26 PM #19 Phase 36 File APIProgress.cpp, Line 276
    Burn process started at 2.4x (3,324 KB/s)

    1:20:26 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    1:20:26 PM #21 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 1 h
    Disc Manufacturer ID: AML.....
    Media type ID: 001
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 01 41 4D 4C 00 00 - 00 00 00 30 30 31 00 38 ...AML.....001.8
    23 54 37 13 02 4A 71 02 - 90 66 16 16 0B 0B 0A 0A #T7..Jq..f......
    01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................

    1:20:26 PM #22 Text 0 File DVDPlusRW.cpp, Line 632
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    1:41:33 PM #23 Text 0 File WriterStatus.cpp, Line 116
    <PIONEER DVD-RW DVR-106D> start writing Lead-Out at LBA 2090160 (1FE4B0h), lenght 0 blocks

    1:41:33 PM #24 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    1:41:46 PM #25 SCSI -1106 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 3, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x03
    CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x73 0x03

    1:41:48 PM #26 CDR -1106 File ThreadedTransferInterface.cpp, Line 1800
    Power calibration error

    1:41:48 PM #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1800
    Could not perform end of Disc-at-once

    1:42:01 PM #28 SCSI -1106 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 3, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x03
    CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x73 0x03

    1:42:01 PM #29 Phase 127 File APIProgress.cpp, Line 276
    Generating DVD high compatibility borders

    1:42:01 PM #30 CDR -1106 File WriterStatus.cpp, Line 167
    Power calibration error

    1:42:01 PM #31 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    1:42:01 PM #32 Phase 38 File APIProgress.cpp, Line 276
    Burn process failed at 2.4x (3,324 KB/s)

    1:42:01 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    1:42:01 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 5:07:32 PM
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/6/2002 10:01:08 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.02.42a, size=17184 bytes, created 11/27/2003 11:04:54 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  3. ScubaPete

    ScubaPete Senior member

    Joined:
    Mar 13, 2003
    Messages:
    6,097
    Likes Received:
    0
    Trophy Points:
    116


    Hi ya Linn, welcome to aD,

    Although I don't see right off where the error is in your first log - I do see a “Power Calibration Error” in the second log. A “Power Calibration Error” can be attributed to the Optical Components of a DVD Writer. It is also attributed to the use of a poor quality media.

    Two questions arise -

    First, Can you burn anything at all with your burners i.e., CD's of any nature OR DVD data files ?

    Second, What media are you using ?

    What exactly what were you trying to burn when the trouble ocurred ?

    Thanks,

    Pete

     
  4. linnm666

    linnm666 Guest

    Thankyou!
    yes I can burn DVD's with Stomp Recordnow max. What I have been doing the last couple of days is backing up as a DVD format using DVD shrink then using STOMP to put those 2 files onto DVD. It is actually faster. this way but where I was able to do the encoding and writing at the same time. It crashes (coaster time) and this does this on any movie or region. I have been using Compusa DVD's but have switched to Sony DVD's. This is also copying from DVD to DVD or file to DVD (DVD incriptor).

    I hope this helps you some in resolving my problams.

    p.s.

    I reloaded an order verson of NERO, and still having the same problam. Will try maybe tomarou to over write it with the latest NERO.

    Any suggestions, let me know.

    Linn

    Thanks again
     
  5. ScubaPete

    ScubaPete Senior member

    Joined:
    Mar 13, 2003
    Messages:
    6,097
    Likes Received:
    0
    Trophy Points:
    116


    Linn,

    We're lucky enough to have a "Ahead" representive here at aD, I'll send him a note and see if he can stop by and have a look at your log.

    Meanwhile, do what you're doing and we'll try to get Nero going when he has some free time - remember, he has a full time job and he'll get here when he can -

    Pete

     
  6. linnm666

    linnm666 Guest

    i appreciate that!! will hear from you soon

    Linn
     
  7. ccampbell

    ccampbell Regular member

    Joined:
    Mar 24, 2004
    Messages:
    627
    Likes Received:
    0
    Trophy Points:
    26
    That first log file I've never seen before. But unless you cut out quite a lot of content, it would leave me to believe that our software failed to install properly, was corrupted by the installation of another software. The reason I say this is that it never even get's to the polling of the recorder or the settings.

    I would very highly recommend using the Nero Clean tool to uninstall our software from your system, and then install Nero 6.6.0.3 and NVE 3.0.1.14 and see if this resolves your issue, or at least provides a better log file to help diagnose the problem.

    Regards,

    Craig
    Ahead Software
    USA
     
  8. linnm666

    linnm666 Guest

    To Pete and Craig
    Thanks for the great help finished checking it out early out this morning and everything is working perfectly now. Thanks for the assistance and keep uo the great work.

    LINN

    Thanks again
     
  9. ScubaPete

    ScubaPete Senior member

    Joined:
    Mar 13, 2003
    Messages:
    6,097
    Likes Received:
    0
    Trophy Points:
    116


    Hey LINN,

    Now that you're doing well, that doesn't mean it's time for you to up and Ski-dattle - this is a give and take kind of a deal - we had fun helping you, now, the next time, you get to have some fun yourself :)

    It's people like you who make this site work - You've seen how we work and you've seen that we had fun doing it - Now it's your turn, stop back when you're free and help someone else - You'll have fun and, a chance to learn some more, (teaching is a learning experience too you know) the people you help will appreciate it and it will make you feel better :)

    Then you'll have a chance to "Welcome" them into our little Club :D

    Take a few minutes and check out our opening page. We've got a ton"O"stuff here at aD – Checkout other forums, we have the "Safety Valve" a forum about anything – from "What's bugging you," "Where members come from" OR the best joke you've heard – OR, check out our forums on Digital Camcorders, Photography, Home Theater components, Games, p2p topics or even Cellular phones.

    We hope to see you around when you're NOT having problems to solve -

    You'll find us hanging out, over there by the water cooler, under the potted palm, chewing the fat and trying to help the next Newbie with the weight of the burning world upon their shoulders -

    We'll be lQQking for you -

    Sea ya soon,

    Pete :b)
     
  10. linnm666

    linnm666 Guest

    you got it.

    Linn
     
  11. mutlie

    mutlie Member

    Joined:
    Jan 7, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    i to have been suffering from this problem

    my error box appears saying burn error

    then reads burn process failed at 2.4x(3,324KB/s)

    then continues:
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 19:18:06
    Nero API version: 6.3.0.2
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <_NEC DVD+RW ND-2100AD> Version: 1.26 - HA 3 TA 0 - 6.3.0.2
    Adapter driver: <atapi> HA 3
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : _NEC DVD+RW ND-2100AD atapi Port 3 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG DVD-ROM SD-616E atapi Port 3 ID 1 DMA: On

    === CDRom-Device-Map ===
    _NEC DVD+RW ND-2100AD E: CDRom0
    SAMSUNG DVD-ROM SD-616E F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 511MB (523568kB)
    Free physical memory: 312MB (320040kB)
    Memory in use : 38 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    7.1.2005
    NeroAPI
    20:39:40 #1 Phase 112 File APIProgress.cpp, Line 253
    DVD-Video files reallocation started

    20:39:40 #2 Phase 114 File APIProgress.cpp, Line 253
    DVD-Video files reallocation completed (no file modified)

    20:39:40 #3 Phase 111 File APIProgress.cpp, Line 253
    DVD-Video files sorted

    20:39:42 #4 Text 0 File Reader.cpp, Line 118
    Reader running

    20:39:42 #5 Text 0 File Writer.cpp, Line 124
    Writer _NEC DVD+RW ND-2100AD running

    20:39:42 #6 ISO9660GEN -11 File geniso.cpp, Line 3882
    First writeable address = 0 (0x00000000)

    20:39:42 #7 ISO9660GEN -11 File geniso.cpp, Line 3882
    First writeable address = 0 (0x00000000)

    20:39:43 #8 Text 0 File Burncd.cpp, Line 3101
    Turn on Disc-At-Once, using DVD media

    20:40:13 #9 Text 0 File DlgWaitCD.cpp, Line 240
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2286105 (508:01.30, 4465MB)

    20:40:13 #10 Text 0 File DlgWaitCD.cpp, Line 245
    Write in overburning mode: FALSE

    20:40:13 #11 Text 0 File DlgWaitCD.cpp, Line 2085
    Recorder: _NEC DVD+RW ND-2100AD, Media type: DVD+R

    20:40:13 #12 Text 0 File DlgWaitCD.cpp, Line 406
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: unknown. Medium required by compilation: DVD+R/RW.)

    20:40:13 #13 Text 0 File ThreadedTransferInterface.cpp, Line 779
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286106 (2286106) = #2286106/508:1.31
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286106 blocks [_NEC DVD+RW ND-2100AD]
    --------------------------------------------------------------

    20:40:13 #14 Text 0 File ThreadedTransferInterface.cpp, Line 948
    Prepare recorder [_NEC DVD+RW ND-2100AD] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681945088, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2286106 | lead-out | 1 | 0x00 | 0x41

    20:40:15 #15 Phase 24 File APIProgress.cpp, Line 253
    Caching of files started

    20:40:15 #16 Text 0 File Burncd.cpp, Line 4073
    Cache writing successful.

    20:40:15 #17 Phase 25 File APIProgress.cpp, Line 253
    Caching of files completed

    20:40:16 #18 Phase 36 File APIProgress.cpp, Line 253
    Burn process started at 2.4x (3,324 KB/s)

    20:40:16 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2264
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    20:40:16 #20 SCSI -1066 File Cdrdrv.cpp, Line 1171
    SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0C167000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    20:40:16 #21 SCSI -1066 File Cdrdrv.cpp, Line 1171
    SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0C165000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    20:40:16 #22 SCSI -1066 File Cdrdrv.cpp, Line 1171
    SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0C165000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    20:40:16 #23 Text 0 File DVDR.cpp, Line 4034
    Drive: _NEC DVD+RW ND-2100AD
    Book Type request: DVD-ROM
    Changing the book type was finish with error code: 0

    20:40:16 #24 Text 0 File DVDPlusRW.cpp, Line 564
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    20:40:32 #25 SCSI -1106 File Cdrdrv.cpp, Line 1431
    SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x01570000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x03
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x73 0x03

    20:40:32 #26 CDR -1106 File Writer.cpp, Line 301
    Power calibration error

    20:40:32 #27 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    20:40:32 #28 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    20:40:32 #29 Phase 127 File APIProgress.cpp, Line 253
    Generating DVD high compatibility borders

    20:40:32 #30 Phase 129 File APIProgress.cpp, Line 253
    Generating DVD borders completed successfully

    20:40:32 #31 SCSI -1066 File Cdrdrv.cpp, Line 1171
    SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0C165000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    20:40:33 #32 Text 0 File DVDR.cpp, Line 4034
    Drive: _NEC DVD+RW ND-2100AD
    Book Type request: DVD+R
    Changing the book type was finish with error code: 0

    20:40:33 #33 Phase 38 File APIProgress.cpp, Line 253
    Burn process failed at 2.4x (3,324 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.70a, size=20176 bytes, created 03/03/2004 01:02:00 (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    tried the above solution but is no good perhaps im doing somthing wrong, please help. i recently changed my dvd writer but i think it stopped working before that hard to tell cause the coincided with each other.

    p.s usually burns a lot faster than 2.4x

    any help would be greatly appreciated
     
  12. ScubaPete

    ScubaPete Senior member

    Joined:
    Mar 13, 2003
    Messages:
    6,097
    Likes Received:
    0
    Trophy Points:
    116


    mutlie,


    A "Power Calibration Error" can be attributed to the Optical Components of a DVD Writer. Translation: The laser can be dirty, out of alignment etc. Using crappy discs can also cause a "Power Calibration Error".

    Solution: 1. Change discs (use a better quality).
    2. Use a lens-cleaning disc (available at any computer store)
    3. Hook the drive up to a different PC to ascertain if it functions. If it doesn't function there - either send out for repair OR replace with a new drive.

    Since it is a NEC burner - I would recommend that you replacement it (if necessary) should the other solution suggestions fail - with a new drive as that NEC drive (mine too) suck big time. Get a burner that is truly a dual format, not one that claims to be a dual format but only burns +R media.

    Cheers,

    Pete :)



     
    Last edited: Jan 8, 2005
  13. mutlie

    mutlie Member

    Joined:
    Jan 7, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    cheers il give that a bash
     

Share This Page