Hi! I keep trying to copy Data DVDs that I've burned with Nero (so as to make a second copy for someone else). It keeps going right to the end and then suddenly fails (someone else on here had a similar problem with CDs. Anyway, I got this log below. Can someone tell me what it says and what I should do? Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM Nero version: 6.3.0.3 (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL12 - HA 1 TA 0 - 6.3.0.3 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: < BDV316B >Version: H1.0 - HA 1 TA 1 - 6.3.0.3 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST360020A atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC AC11200L atapi Port 0 ID 1 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On CdRomPeripheral : BDV316B atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-H10N D: CDRom0 BDV316B E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 510MB (522768kB) Free physical memory: 229MB (234808kB) Memory in use : 55 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.2.2007 DVD-Copy on the fly 9:18:56 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 9:18:56 PM #2 Text 0 File Writer.cpp, Line 124 Writer HL-DT-ST DVDRAM GSA-H10N running 9:18:56 PM #3 Text 0 File DVDCopy.cpp, Line 241 DVD Track-Information from source disc S01 T01 Con 0x04 Start 0 Len 2295104 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0) 9:18:56 PM #4 Text 0 File DVDCopy.cpp, Line 334 Max -1 tracks of 1 allowed to copy 1: 0 - 2295104 = 2295104, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 9:18:56 PM #5 Text 0 File Burncd.cpp, Line 3101 Turn on Disc-at-once, using DVD media 9:18:56 PM #6 Text 0 File DlgWaitCD.cpp, Line 240 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2295103 (510:01.28, 4482MB) 9:18:56 PM #7 Text 0 File DlgWaitCD.cpp, Line 245 Write in overburning mode: FALSE 9:18:56 PM #8 Text 0 File DlgWaitCD.cpp, Line 2085 Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD+R Disc Manufacturer ID: AML, Media Type ID: 001, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 1 9:18:56 PM #9 Text 0 File DlgWaitCD.cpp, Line 406 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:18:56 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 779 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2295104 (2295104) = #2295104/510:1.29 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295104 blocks [HL-DT-ST DVDRAM GSA-H10N ] -------------------------------------------------------------- 9:18:56 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 948 Prepare recorder [HL-DT-ST DVDRAM GSA-H10N ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4700372992, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2295104 | lead-out | 1 | 0x00 | 0x41 9:18:57 PM #12 Phase 36 File dlgbrnst.cpp, Line 1800 Burn process started at 4x (5,520 KB/s) 9:18:57 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2264 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 9:18:57 PM #14 Text 0 File Cdrdrv.cpp, Line 7941 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 01 41 4D 4C 00 00 00 - 00 00 30 30 31 00 38 23 ..AML.....001.8# 54 37 13 02 4A 71 02 90 - 66 16 16 0B 0B 0A 0A 01 T7..Jq..f....... 1C 1E 0B 0C 12 12 01 00 - 00 00 00 00 00 00 00 01 ................ 9:18:57 PM #15 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 14:20,913 (860913ms) -> OK 9:18:57 PM #16 Text 0 File DVDPlusRW.cpp, Line 564 Start write address at LBA 0 DVD high compatibility mode: Yes 9:49:23 PM #17 SCSI -1047 File Cdrdrv.cpp, Line 1431 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x06B15000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x64 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x20 0x8F 0x40 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x64 0x00 9:49:54 PM #18 SCSI -1093 File Cdrdrv.cpp, Line 1431 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x06B15000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x01 CDB Data: 0x28 0x00 0x00 0x20 0x8F 0x40 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x02 0x01 9:49:54 PM #19 TRANSFER -25 File Reader.cpp, Line 371 Error reading data 9:50:01 PM #20 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 9:50:23 PM #21 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 9:50:23 PM #22 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 9:50:23 PM #23 Phase 38 File dlgbrnst.cpp, Line 1800 Burn process failed at 4x (5,520 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 10/3/2006 12:21:46 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 10/3/2006 12:21:48 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
You are doing "On the Fly" copying. After the option, it is explained that is fairly risky. Try duplicating without that option to see if it helps. The DMA on the CD drive is turned off, have you tried to get it back on? Looks like your media is not good quality--get some better stuff. http://www.digitalfaq.com/media/dvdmedia.htm
Your Nero is an older version, try here for an update, both packages Package 1: http://www.dvdplusvideo.com/Nero-6.6.0.18_no_yt.exe Package 2: http://www.dvdplusvideo.com/NVE-3.1.0.21_no_yt.exe You have Roxio installed, it clashes with Nero, to remove, run this zapper http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml I would suggest you edit out your serial number at the start of the log
Hi Saltgrass, I've gotten a message regarding the DMA and have tried to change it, but it just won't turn on. Can you give me a step by step way to do it for the benefit of us not so computer versed? Thanks so much. Hi Gwendolyn, I had a newer version of Nero installed and then my friend suggested I try the older one (which is why I have it) just to see if it works better as the newer one was doing the same thing. I wonder how I have ROXIO installed as I never installed it. The log says that?
Also Saltgrass, I didn't see where it says "ON THE FLY" copying. Where is that option for me to check off? As you can see I'm totally inexperienced at this! Thanks so much for your help!
CDRAL represents the Roxio thing....try 6.6.0.18...you wont be sorry. DMA needs to be on, heres a guide to turn back on http://forums.afterdawn.com/thread_view.cfm/260038
When you do a Copy DVD compilation in NeroBurning ROM, on the New Compilation options, Copy Options tab, there is a check box for "Copy on the Fly". I believe this allows the data to be stored on the hard drive first as opposed to trying to write directly from the source to the target.
Hi Gwendolin! Thanks so much! Only my secondary driver was the one that had the "PIO" that your instructions talked about so I uninstalled that only. I'm trying to download the NERO version you sent, but now it's asking me for a password. What should I do? Saltgrass thanks so much to you too. I suppose if I download this other NERO I'll no longer see that option to "copy on the fly," correct?
Hi again, I tried all the suggestions you all gave me and they seem to do what you've predicted (except the "On the Fly" thing which I still haven't been able to find). Just tried copying another DVD (that I myself had made)and interestingly it's working much faster but it failed all the same and this is the log I once again got: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL12 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: < BDV316B >Version: H1.0 - HA 1 TA 1 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST360020A atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC AC11200L atapi Port 0 ID 1 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On CdRomPeripheral : BDV316B atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-H10N D: CDRom0 BDV316B E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 510MB (522768kB) Free physical memory: 116MB (119008kB) Memory in use : 77 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.2.2007 DVD-Copy on the fly 7:31:25 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 7:31:25 PM #2 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-H10N running 7:31:25 PM #3 Text 0 File DVDCopy.cpp, Line 293 DVD Track-Information from source disc: Media Type: DVD-ROM S01 T01 Con 0x04 Start 0 Len 2295104 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 7:31:25 PM #4 Text 0 File DVDCopy.cpp, Line 406 Max -1 tracks of 1 allowed to copy 1: 0 - 2295104 = 2295104, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 7:31:25 PM #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 7:31:25 PM #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2295103 (510:01.28, 4482MB) 7:31:25 PM #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 7:31:25 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4 Disc Application Code: 0, Extended Information Indicators: 7 7:31:25 PM #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:31:25 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2295104 (2295104) = #2295104/510:1.29 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295104 blocks [HL-DT-ST DVDRAM GSA-H10N] -------------------------------------------------------------- 7:31:25 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4700372992, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2295104 | lead-out | 1 | 0x41 | 0x00 7:31:25 PM #12 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 12x (16,620 KB/s) 7:31:25 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 7:31:26 PM #14 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: RICOHJPN Media type ID: R03 Product revision number: 4 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8 23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 7:31:26 PM #15 Text 0 File DVDR.cpp, Line 5376 Drive: HL-DT-ST DVDRAM GSA-H10N Book Type request [LG]: DVD-ROM Changing the Book Type was finished successfully, return code 0 7:31:26 PM #16 CDR -1207 File DVDR.cpp, Line 5306 Book Type automatically set to: DVD-ROM 7:31:26 PM #17 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 7:41:18 PM #18 SCSI -1093 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x08A45000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x01 CDB Data: 0x28 0x00 0x00 0x20 0x8F 0x40 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x02 0x01 7:41:18 PM #19 TRANSFER -25 File Reader.cpp, Line 382 Error reading data 7:41:18 PM #20 Text 0 File Reader.cpp, Line 385 Exception value: -1093 7:41:23 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 7:41:44 PM #22 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 12x (16,620 KB/s) 7:41:59 PM #23 SCSI -1114 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x0E 0x29 0x00 Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 10/3/2006 12:21:48 PM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 18, 0, size=99584 bytes, created 7/8/2005 5:17:54 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 18, 0, size=29696 bytes, created 7/8/2005 5:17:36 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 18, 0, size=8704 bytes, created 7/8/2005 5:17:56 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
You are using poor quality discs and are burning too fast, slow burn to 4X. I use and recommend Verbatim or Sony (made in Japan)
Hey Gwendolin, thanks again for your reply. I've actually been using TDK and Memorex, which I wouldn't have thought to be poor quality. I mean, they burn off my hard drive without a problem, they just seem to be unable to copy. I'll also try that 4x you're mentioning. Thanks so much again!
You should edit out your Nero serial number from your posts unless you want to give it away. It's the long number at the top of your Nero log file: A20-xxxx-xxxx-xxxx-xxxx-xxxx Something else: You are burning way to close to the edge of the disc. The problem is that when you wrote the original data DVDs they came out this size. Nero runs out of room so you get an error. And then it stops copying your data because there is no place to put it: My suggestion would be to copy the data from the disc to a folder and then copy the folder the way the original DVDs were copied.
Hey Gwendolin, boy I tell you, I'm just blown away at how I just can't get to the bottom of this problem. I tried your suggestion to burn at 4x, which I did and it still didn't work. I'm going to try and call my driver's manufacturer tomorrow. See what they tell me. Thanks for the tip, Fasfrank, I wouldn't have known as I"m not very computer savvy. There again, someone sent me this version of Nero so it's not like I obtained it on my own. I know what you mean by me burning up to the edge of the disk. This last time when I tried what Gwendolin suggested I burned up to 77% and then it suddenly said "error reading data" (which you will see at some point in the log below)and stopped. I tried to copy from a Memorex DVD to a TDK. I can see what Gwendolin's saying about cheaper DVD's, but would it really be THAT picky about the brand? Anyway here's my last log: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL12 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: < BDV316B >Version: H1.0 - HA 1 TA 1 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST360020A atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC AC11200L atapi Port 0 ID 1 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On CdRomPeripheral : BDV316B atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-H10N D: CDRom0 BDV316B E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 510MB (522768kB) Free physical memory: 173MB (177932kB) Memory in use : 65 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.2.2007 DVD-Copy on the fly 11:22:42 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 11:22:42 PM #2 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-H10N running 11:22:42 PM #3 Text 0 File DVDCopy.cpp, Line 293 DVD Track-Information from source disc: Media Type: DVD-ROM S01 T01 Con 0x04 Start 0 Len 2295104 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 11:22:42 PM #4 Text 0 File DVDCopy.cpp, Line 406 Max -1 tracks of 1 allowed to copy 1: 0 - 2295104 = 2295104, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 11:22:42 PM #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 11:22:42 PM #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2295103 (510:01.28, 4482MB) 11:22:42 PM #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 11:22:42 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 11:22:42 PM #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:22:42 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2295104 (2295104) = #2295104/510:1.29 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295104 blocks [HL-DT-ST DVDRAM GSA-H10N] -------------------------------------------------------------- 11:22:42 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4700372992, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2295104 | lead-out | 1 | 0x41 | 0x00 11:22:44 PM #12 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 11:22:44 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 11:22:44 PM #14 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: CMC.MAG. Media type ID: M01 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8 23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 11:22:44 PM #15 Text 0 File DVDR.cpp, Line 5376 Drive: HL-DT-ST DVDRAM GSA-H10N Book Type request [LG]: DVD-ROM Changing the Book Type was finished successfully, return code 0 11:22:44 PM #16 CDR -1207 File DVDR.cpp, Line 5306 Book Type automatically set to: DVD-ROM 11:22:44 PM #17 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 11:43:12 PM #18 SCSI -1047 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0A135000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x64 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x1A 0xFD 0x60 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x64 0x00 11:43:12 PM #19 TRANSFER -25 File Reader.cpp, Line 382 Error reading data 11:43:12 PM #20 Text 0 File Reader.cpp, Line 385 Exception value: -1047 11:43:19 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:43:43 PM #22 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 10/3/2006 12:21:48 PM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 18, 0, size=99584 bytes, created 7/8/2005 5:17:54 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 18, 0, size=29696 bytes, created 7/8/2005 5:17:36 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 18, 0, size=8704 bytes, created 7/8/2005 5:17:56 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I edited my previous post with a suggestion. Take those Memorex DVDs and bury them somewhere. CMC MAGs are about as bad as you can get. It really does make a difference. We consider 4464 Mb reasonable for good media, maybe even 4470. We would never recommend going right to the edge of the disc at 4482 Mb. And certainly not with CMC MAG junk. Nero has done that with your original data DVDs so I seriously doubt they can be copied disc to disc. Like I mentioned previously, copy the data to a folder and then copy the data from the folder to DVD. You may be able to just copy/paste the data from the DVD and let Windows move it to the folder for you. Once you have the data in the folder make copies onto good DVD media. You have InCD installed still. Try running the InCD CleanTool.