Hi I've got a new samsung TS552B Firmware TS04 and when burning +R dvds I dont get a single problem! but when burning stuff to -R dvds I just get errors. I've tried different brands from Sony to Verbatim I even use Verbatim +R discs no problem. I've tried burning at different Speeds and Different Buring Software(Nero, Clone DVD, Alcohol 120% etc not all installed at once). The drive came with TSO3 Firmware and I updated to TS04 Firmware and still get same problem (although seems the burn a little bit more) Nero Log File: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 10:03:20 ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 16:51:12 Nero version: 6.6.0.1 Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS04 - HA 3 TA 0 - 6.6.0.1 Adapter driver: <> HA 3 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.6.0.1 Adapter driver: <d346prt> HA 2 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y160P0 nvatabus Port 0 ID 0 DMA: Off CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B nvatabus Port 0 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 2 ID 0 DMA: Off === CDRom-Device-Map === Generic DVD-ROM F: CDRom1 TSSTcorp CD/DVDW TS-H552 D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 668MB (684140kB) Memory in use : 34 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.11.2004 DVD-Copy on the fly 23:42:13 #1 Text 0 File Reader.cpp, Line 127 Reader running 23:42:13 #2 Text 0 File Writer.cpp, Line 122 Writer TSSTcorp CD/DVDW TS-H552B running 23:42:14 #3 Text 0 File DVDCopy.cpp, Line 267 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 2267300 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0) 23:42:14 #4 Text 0 File DVDCopy.cpp, Line 370 Max -1 tracks of 1 allowed to copy 1: 0 - 2267300 = 2267300, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 23:42:14 #5 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-at-once, using DVD media 23:42:14 #6 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2267299 (503:50.49, 4428MB) 23:42:14 #7 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 23:42:14 #8 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R Disc Manufacturer: - Disc Application Code: 64, Disc Physical Code: 193 23:42:14 #9 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 23:42:14 #10 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2267300 (2267300) = #2267300/503:50.50 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2267300 blocks [TSSTcorp CD/DVDW TS-H552B] -------------------------------------------------------------- 23:42:26 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4643430400, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2267300 | lead-out | 1 | 0x00 | 0x41 23:42:26 #12 Phase 28 File dlgbrnst.cpp, Line 1853 Speed measurement started 23:42:26 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 23:47:11 #14 Text 0 File WriterStatus.cpp, Line 116 <TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 2267300 (2298A4h), lenght 0 blocks 23:47:11 #15 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 23:47:11 #16 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 23:47:11 #17 Phase 29 File dlgbrnst.cpp, Line 1804 Speed measurement completed: 11.7x (16,202 KB/s) 23:47:11 #18 Phase 36 File dlgbrnst.cpp, Line 1853 Burn process started at 2x (2,770 KB/s) 23:47:11 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 23:47:11 #20 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 28:01,964 (1681964ms) -> OK 23:47:11 #21 Text 0 File DVDR.cpp, Line 2027 Recording mode: Sequential Recording Mode 23:47:11 #22 Text 0 File Mmc.cpp, Line 20673 Set BUFE: Super Link -> ON 23:47:11 #23 Text 0 File DVDR.cpp, Line 2168 Start write address at LBA 0 DVD high compatibility mode: Yes 23:47:11 #24 Text 0 File Cdrdrv.cpp, Line 8281 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 23:47:24 #25 Text 0 File Cdrdrv.cpp, Line 1284 23:47:24.156 - TSSTcorp CD/DVDW TS-H552B\H3 T0 : Queue again later 23:47:28 #26 SCSI -1176 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x039C0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x72 Sense Qual: 0x01 CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x72 0x01 23:47:28 #27 CDR -1176 File Writer.cpp, Line 311 Session fixation error 23:47:29 #28 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 23:47:29 #29 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 23:47:29 #30 Text 0 File DVDR.cpp, Line 2410 EndDAO: Last written address was 607 23:47:29 #31 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 23:47:29 #32 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 23:47:29 #33 Phase 38 File dlgbrnst.cpp, Line 1853 Burn process failed at 2x (2,770 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 17/07/2002 09:05:10 File 'Drivers\d346prt.sys': Ver=3.46.0.0 built by: WinDDK, size=5248 bytes, created 12/03/2004 21:41:42 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) [bold]PLEASE HELP![/bold]
I've got a Panasonic 107 and it won't burn +discs..lol. It just burns -discs. I just live with it, as it gets the job done anyways. I've tried loads of things from firmware to updating burning software and none of it works..lol.
Well you say you have a new burner. If I was you I would return it. Its not doing what it is supposed to be doing. Maybe try a different brand of burner, theres lots of info on this site about them, see what other people have to say. Personally I have an LG GSA-4120B Never a problem on +r or -r and over 500 discs burnt.
I have gsa 4120b 104 firmware.It's nice to hear someone say they have no problems (was starting to think it was a dud.)Burn't plenty of half discs before changing to riteks.Now i have successful burns using dvd shrink + nero BUT now the discs skip during playback (extreamly annoying). Seam to playback o.k on the lg drive,but not on anything else,ps2,xbox or phillips player.reading some other forums the GO5's are getting a bad wrap.maybe the problem, might try TY's or open frisby shop...
I have the same problem. It is just the compatibility of the media we are using. I just bought the exact same burner to backup my PS2 games. My previous DVD Burner broke after two years of usage [external] and I have no problem using Ritek G04 on it. Now with the new burner, Ritek G04 is incompatible!! I've read reviews that this burner was rushed out in the market early. If they have fixed the compatibility of DVD-R of this burner, this would be one of the best burner out there. I will post in DVD Media fourm - requesting another good media for this burner [for DVD-R] [in another day however - playing games =p]. I'm somewhat lucky [though not tested enough yet] that DVD+R works on my PS2 [Version 4: tested Naruto 2 DVD+R TDK]. But I will ask for another good media besides Ritek [and will list the incompability of other media too - the website that reviewed this have some incompatibile media.
i've only been burning for about 8 months and i always hear everyone talk about how good there burner is but i bought aMicro Advantage 4DVDRW-B13 dvd +/- burn that i've never heard anyone ever mention and have never had a problem with burning onto any type of media, and i already have 120 dvd's burnt and they work just great