1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

burns but only 80% of the disc...

Discussion in 'DVDR' started by Feud, May 3, 2005.

  1. Feud

    Feud Member

    Joined:
    May 3, 2005
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    11
    So I'm backing up using shrink to rip and nero to burn. Both latest versions. Nero completes the burn, I hit "okay" then "done" and out pops the disc. examining the disc I notice the outer ring (less than a half inch) hasn't been burned on. I threw the disc into a dvd player and sure enough it freezes towards the end.

    So I tried using my second burner. Got the same results.

    I recently installed empire earth 2 so I uninstalled and tried again. Same result.

    I did a system restore to a time before when things were working fine. Same result.

    At first I was thinking that I wore my drive out but the same thing is happeneing on both drives.

    Any Ideas???

    OS Name Microsoft Windows XP Professional
    Version 5.1.2600 Service Pack 2 Build 2600
    OS Manufacturer Microsoft Corporation
    System Name
    System Manufacturer INTEL_
    System Model D865PERL
    System Type X86-based PC
    Processor x86 Family 15 Model 2 Stepping 9 GenuineIntel ~2793 Mhz
    Processor x86 Family 15 Model 2 Stepping 9 GenuineIntel ~2793 Mhz
    BIOS Version/Date Intel Corp. RL86510A.86A.0078.P17.0405301738, 5/30/2004
    SMBIOS Version 2.3
    Windows Directory C:\WINDOWS
    System Directory C:\WINDOWS\system32
    Boot Device \Device\HarddiskVolume1
    Locale United States
    Hardware Abstraction Layer Version = "5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)"

    Time Zone Pacific Daylight Time
    Total Physical Memory 1,024.00 MB
    Available Physical Memory 701.69 MB
    Total Virtual Memory 2.00 GB
    Available Virtual Memory 1.96 GB
    Page File Space 2.40 GB
    Page File C:\pagefile.sys

    conflicts/sharing

    I/O Port 0x00000000-0x00000CF7 PCI bus
    I/O Port 0x00000000-0x00000CF7 Direct memory access controller

    I/O Port 0x000003C0-0x000003DF Intel(R) 82865G\PE\P Processor to AGP Controller - 2571
    I/O Port 0x000003C0-0x000003DF RADEON 9800 PRO

    IRQ 16 RADEON 9800 PRO
    IRQ 16 Intel(R) 82801EB USB Universal Host Controller - 24D2
    IRQ 16 Intel(R) 82801EB USB Universal Host Controller - 24DE

    IRQ 17 OHCI Compliant IEEE 1394 Host Controller
    IRQ 17 Intel(R) ICH5/ICH5-M SMBus Controller - 24D3 (Intel(R) SMBus 2.0 Driver)
    IRQ 17 SoundMAX Integrated Digital Audio

    IRQ 18 Intel(R) 82801EB USB Universal Host Controller - 24D7
    IRQ 18 Intel(R) 82801EB Ultra ATA Storage Controllers

    Memory Address 0xA0000-0xBFFFF PCI bus
    Memory Address 0xA0000-0xBFFFF Intel(R) 82865G\PE\P Processor to AGP Controller - 2571
    Memory Address 0xA0000-0xBFFFF RADEON 9800 PRO

    I/O Port 0x000003B0-0x000003BB Intel(R) 82865G\PE\P Processor to AGP Controller - 2571
    I/O Port 0x000003B0-0x000003BB RADEON 9800 PRO


    Components / Multimedia

    Drive D:
    Description CD-ROM Drive
    Media Loaded No
    Media Type CD-ROM
    Name SONY DVD RW DRU-530A
    Manufacturer (Standard CD-ROM drives)
    Status OK
    Transfer Rate Not Available
    SCSI Target ID 0
    PNP Device ID IDE\CDROMSONY_DVD_RW_DRU-530A____________________2.1C____\5&4D9CFF&C&0.0.0
    Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 48.38 KB (49,536 bytes), 8/23/2001 5:00 AM)

    Drive E:
    Description CD-ROM Drive
    Media Loaded No
    Media Type CD-ROM
    Name LITE-ON DVDRW LDW-811S
    Manufacturer (Standard CD-ROM drives)
    Status OK
    Transfer Rate Not Available
    SCSI Target ID 1
    PNP Device ID IDE\CDROMLITE-ON_DVDRW_LDW-811S__________________HS0E____\5&4D9CFF&C&0.1.0
    Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 48.38 KB (49,536 bytes), 8/23/2001 5:00 AM)


     
  2. Feud

    Feud Member

    Joined:
    May 3, 2005
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    11
    Oh and using Nero Burning Rom
     
  3. Hallywood

    Hallywood Regular member

    Joined:
    Apr 10, 2004
    Messages:
    179
    Likes Received:
    0
    Trophy Points:
    26
    When the burn is done Shrink will or should automatically eject the disc. You shouldn't have to touch anything until the disc is ejected.
    HW.
     
  4. Feud

    Feud Member

    Joined:
    May 3, 2005
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    11
    I don't have it set up that way. That's an option.
     
  5. Feud

    Feud Member

    Joined:
    May 3, 2005
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    11
    Just uninstalled completely, defragged, reinstalled and still getting same results.
     
  6. squizzle

    squizzle Active member

    Joined:
    Apr 19, 2004
    Messages:
    2,867
    Likes Received:
    0
    Trophy Points:
    66
    have you tried different media? What brand of media are you using?
     
  7. Feud

    Feud Member

    Joined:
    May 3, 2005
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    11
    Sony discs. Never had trouble before. That is not the problem.
     
  8. Feud

    Feud Member

    Joined:
    May 3, 2005
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    11
    uninstalled nero 6 ultra - installed nero 5. Same result.
     
  9. Feud

    Feud Member

    Joined:
    May 3, 2005
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    11
    Log File

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 4:06:00 AM
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.12
    Internal Version: 6, 6, 0, 12c

    Recorder: <LITE-ON DVDRW LDW-811S> Version: HS0E - HA 3 TA 1 - 6.6.0.12
    Adapter driver: <atapi> HA 3
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <SONY DVD RW DRU-530A >Version: 2.1c - HA 3 TA 0 - 6.6.0.12
    Adapter driver: <atapi> HA 3

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1200JB-00DUA3 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : IC35L060AVV207-0 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : SONY DVD RW DRU-530A atapi Port 3 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW LDW-811S atapi Port 3 ID 1 DMA: On

    === CDRom-Device-Map ===
    SONY DVD RW DRU-530A D: CDRom0
    LITE-ON DVDRW LDW-811S E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1022MB (1047192kB)
    Free physical memory: 656MB (672288kB)
    Memory in use : 35 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    4.5.2005
    UDF/ISO compilation
    6:17:57 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    6:17:58 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    6:17:58 AM #3 Text 0 File Isodoc.cpp, Line 6194
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    6:17:58 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    6:17:58 AM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    6:17:58 AM #6 Text 0 File Writer.cpp, Line 122
    Writer LITE-ON DVDRW LDW-811S running

    6:17:58 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    6:17:58 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    6:17:58 AM #9 Text 0 File Burncd.cpp, Line 3153
    Turn on Disc-At-Once, using DVD media

    6:17:58 AM #10 Text 0 File DlgWaitCD.cpp, Line 260
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286095 (508:01.20, 4465MB)

    6:17:58 AM #11 Text 0 File DlgWaitCD.cpp, Line 272
    Write in overburning mode: NO (enabled: CD)

    6:17:58 AM #12 Text 0 File DlgWaitCD.cpp, Line 2339
    Recorder: LITE-ON DVDRW LDW-811S, Media type: DVD-R
    Disc Manufacturer: SONY08 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    6:17:58 AM #13 Text 0 File DlgWaitCD.cpp, Line 438
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    6:17:58 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286096 (2286096) = #2286096/508:1.21
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286096 blocks [LITE-ON DVDRW LDW-811S]
    --------------------------------------------------------------

    6:17:58 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [LITE-ON DVDRW LDW-811S] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681924608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286096 | lead-out | 1 | 0x41 | 0x00

    6:17:58 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    6:17:58 AM #17 Text 0 File Burncd.cpp, Line 4037
    Cache writing successful.

    6:17:58 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    6:17:58 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    6:17:59 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    6:17:59 AM #21 Text 0 File DVDR.cpp, Line 2258
    Recording mode: Sequential Recording Mode

    6:17:59 AM #22 Text 0 File Mmc.cpp, Line 21356
    Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

    6:17:59 AM #23 Text 0 File DVDR.cpp, Line 2412
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    6:17:59 AM #24 Text 0 File Cdrdrv.cpp, Line 8438
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    6:18:06 AM #25 Text 0 File Cdrdrv.cpp, Line 1288
    06:18:06.734 - LITE-ON DVDRW LDW-811S\H3 T1 : Queue again later

    6:32:39 AM #26 Text 0 File WriterStatus.cpp, Line 116
    <LITE-ON DVDRW LDW-811S > start writing Lead-Out at LBA 2286096 (22E210h), lenght 0 blocks

    6:32:39 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    6:32:39 AM #28 Text 0 File DVDR.cpp, Line 2649
    EndDAO: Last written address was 2286095

    6:33:01 AM #29 Phase 37 File dlgbrnst.cpp, Line 1832
    Burn process completed successfully at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 4:06:00 AM
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  10. squizzle

    squizzle Active member

    Joined:
    Apr 19, 2004
    Messages:
    2,867
    Likes Received:
    0
    Trophy Points:
    66
    Looks like your burner doesn't like your media. A firmware update might help. I have the same burner and my firmware is HSOR, can be found here: http://codeguys.rpc1.org/firmwares.html
     
  11. davewood

    davewood Guest

    Just passing thought i would add my comment.. locking up at the back end its all down to media and speed.. sony disks are crap ive been doing dvds since they started coming out on Rs 1999 and if you burn too fast and your burn proof kicks in which some dvd players dont like then you will hit trouble, i always burn at x6 speed on x8 speed disks and never have a problem and i always use fuji dye disks there the best.. forget about ritek they are totally over rated unless you use pink aritas but you never know if its a true ritek now a days with all the 3rd Part companies any way just though i would add my comment hope you have sucess in what you do. try intervideo to rip your dvds its very fast and can do direct from your original dvd disk with anydvd running in the backround
     
  12. Feud

    Feud Member

    Joined:
    May 3, 2005
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    11
    not sure how to apply firmware upgrade - I don't have 3.5 drive.
     
  13. Feud

    Feud Member

    Joined:
    May 3, 2005
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    11
    nm - it was an .exe e/smacks head
     
  14. Feud

    Feud Member

    Joined:
    May 3, 2005
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    11
    did firmware update - still getting same results
     
  15. fasfrank

    fasfrank Active member

    Joined:
    Oct 15, 2003
    Messages:
    4,117
    Likes Received:
    0
    Trophy Points:
    66
    Please try some different media.

    I have had problems with Sony DVDs and would not be suprised if this is the problem. At least try some DVD-RW media so we can all try and figure out if the problem is media related.....You know, the process of elimination.
     
  16. Feud

    Feud Member

    Joined:
    May 3, 2005
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    11
    I just tried burning on the sony drive and it failed "power calibration"

    Here's the log

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 4:06:00 AM
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.12
    Internal Version: 6, 6, 0, 12c

    Recorder: <SONY DVD RW DRU-530A> Version: 2.1c - HA 3 TA 0 - 6.6.0.12
    Adapter driver: <atapi> HA 3
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <SONY DVD RW DRU-530A >Version: 2.1c - HA 3 TA 0 - 6.6.0.12
    Adapter driver: <atapi> HA 3

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1200JB-00DUA3 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : IC35L060AVV207-0 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : SONY DVD RW DRU-530A atapi Port 3 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW LDW-811S atapi Port 3 ID 1 DMA: On

    === CDRom-Device-Map ===
    SONY DVD RW DRU-530A D: CDRom0
    LITE-ON DVDRW LDW-811S E: CDRom3
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1022MB (1047192kB)
    Free physical memory: 644MB (659888kB)
    Memory in use : 36 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    4.5.2005
    UDF/ISO compilation
    3:02:32 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    3:02:32 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    3:02:32 PM #3 Text 0 File Isodoc.cpp, Line 6194
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    3:02:32 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    3:02:32 PM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    3:02:32 PM #6 Text 0 File Writer.cpp, Line 122
    Writer SONY DVD RW DRU-530A running

    3:02:32 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    3:02:32 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    3:02:32 PM #9 Text 0 File Burncd.cpp, Line 3153
    Turn on Disc-At-Once, using DVD media

    3:02:33 PM #10 Text 0 File DlgWaitCD.cpp, Line 260
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286095 (508:01.20, 4465MB)

    3:02:33 PM #11 Text 0 File DlgWaitCD.cpp, Line 272
    Write in overburning mode: NO (enabled: CD)

    3:02:33 PM #12 Text 0 File DlgWaitCD.cpp, Line 2339
    Recorder: SONY DVD RW DRU-530A, Media type: DVD-R
    Disc Manufacturer: SONY08 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    3:02:33 PM #13 Text 0 File DlgWaitCD.cpp, Line 438
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    3:02:33 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286096 (2286096) = #2286096/508:1.21
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286096 blocks [SONY DVD RW DRU-530A]
    --------------------------------------------------------------

    3:02:33 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [SONY DVD RW DRU-530A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681924608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286096 | lead-out | 1 | 0x41 | 0x00

    3:02:33 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    3:02:33 PM #17 Text 0 File Burncd.cpp, Line 4037
    Cache writing successful.

    3:02:33 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    3:02:33 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    3:02:33 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    3:02:33 PM #21 Text 0 File DVDR.cpp, Line 2258
    Recording mode: Sequential Recording Mode

    3:02:33 PM #22 Text 0 File Mmc.cpp, Line 21356
    Set BUFE: Power-Burn -> ON

    3:02:33 PM #23 Text 0 File DVDR.cpp, Line 2412
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    3:02:33 PM #24 Text 0 File Cdrdrv.cpp, Line 8438
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    3:03:36 PM #25 SCSI -1106 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x044A0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x03
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x73 0x03

    3:03:36 PM #26 CDR -1106 File Writer.cpp, Line 311
    Power calibration error

    3:03:36 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    3:03:36 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    3:03:36 PM #29 Text 0 File DVDR.cpp, Line 2649
    EndDAO: Last written address was 31

    3:03:36 PM #30 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 4:06:00 AM
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)



    I'm going to remove the sony drive. It's on the same chain as the lite on.
     
  17. Feud

    Feud Member

    Joined:
    May 3, 2005
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    11
    Okay unplugged the sony and successfully burned on the lite on. Burning a second right now to be sure. Looks like the Sony was the problem. Just a side note - my power supply is a Antec tru 380 which, if you see my system specs above, should be plenty to power all the components right?
     
  18. Feud

    Feud Member

    Joined:
    May 3, 2005
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    11
    Burned the second successfully. It was not the media as I had stated before but I understand "the process of elimination".

    Thank you for everyones suggestions.
     
  19. davewood

    davewood Guest

    Just a closing not for your future reference, a power calibration error on nero basically means your dvd writer failed to initialise, which means you have exceded the life of your dvd writer you can in some cases slow the burn speed down to x2 and carry on writing for another 2 months, or in some cases the drive wont work at all, but in my experience of using nero (6years) and numerous drives, this is what power calibration means.
     

Share This Page