1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Can someone please take a look at this error message...

Discussion in 'DVDR' started by Vibroking, Jun 6, 2004.

  1. Vibroking

    Vibroking Member

    Joined:
    Jun 5, 2004
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    ...and tell me what's going on?
    -------------------------------------------------------
    First, thanks to Nephilim for answering my last message and getting me on track.

    I have a Teac DVD burner that lots of folks seem to have trouble with. I have just found updated firmware and installed it without incident. I am getting a different error message than I was before when I try to burn. I am hoping that I just have something set up incorrectly. Here is the error report- any idea what's wrong?

    For the record, I am trying to use DVD Shrink, DVD43 and Nero 6. My media is Verbatim. OS is XP. Lots of ram and free hard drive space.
    -------------------------------------------------------




    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:program FilesAheadNeroWnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
    Nero API version: 6.3.1.15
    Using interface version: 6.0.0.0
    Installed in: C:program FilesAheadNero
    Application: aheadNero - Burning Rom
    Recorder: <TEAC DVD+RW DV-W58E> Version: D.0J - HA 1 TA 1 - 6.3.1.15
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8483B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : TEAC DVD+RW DV-W58E atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST CD-RW GCE-8483B D: CDRom0
    TEAC DVD+RW DV-W58E E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1022MB (1047548kB)
    Free physical memory: 732MB (749612kB)
    Memory in use : 28 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    6.6.2004
    NeroAPI
    8:00:08 PM #1 Phase 111 File APIProgress.cpp, Line 273
    DVD-Video files sorted

    8:00:08 PM #2 Text 0 File Reader.cpp, Line 118
    Reader running

    8:00:08 PM #3 Text 0 File AudioCompilationImpl.cpp, Line 817
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    8:00:08 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    8:00:08 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    8:00:08 PM #6 Text 0 File Burncd.cpp, Line 3167
    Turn on Disc-At-Once, using DVD media

    8:01:44 PM #7 SCSI -1033 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x01

    8:02:17 PM #8 SCSI -1033 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x01

    8:02:26 PM #9 Text 0 File DlgWaitCD.cpp, Line 245
    Last possible write address on media: -196609 (954393:29.12, 4193919MB)
    Last address to be written: 995008 (221:06.58, 1943MB)

    8:02:26 PM #10 Text 0 File DlgWaitCD.cpp, Line 257
    Write in overburning mode: NO

    8:02:26 PM #11 Text 0 File DlgWaitCD.cpp, Line 2137
    Recorder: TEAC DVD+RW DV-W58E, Media type: DVD+RW
    Disc Manufacturer ID: , Media Type ID: , Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 0

    8:02:26 PM #12 Text 0 File DlgWaitCD.cpp, Line 418
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: unknown. Medium required by compilation: DVD+R/RW.)

    8:02:26 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 995008 (995008) = #995008/221:6.58
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 995008 blocks [TEAC DVD+RW DV-W58E ]
    1: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (0) not provided
    original disc pos #0 + 1 (1) = #1/0:0.1
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1 blocks [TEAC DVD+RW DV-W58E ]
    --------------------------------------------------------------

    8:02:26 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 983
    Prepare recorder [TEAC DVD+RW DV-W58E ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 2:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2037776384, ISRC ""
    2: TRM_DATA_MODE1, 2048/0x00, FilePos 2037776384 2037776384 2037778432, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    995008 | 2 | 0 | 0x00 | 0x41
    995008 | 2 | 1 | 0x00 | 0x41
    995009 | lead-out | 1 | 0x00 | 0x41

    8:02:26 PM #15 Phase 24 File APIProgress.cpp, Line 273
    Caching of files started

    8:02:26 PM #16 Text 0 File Burncd.cpp, Line 4177
    Cache writing successful.

    8:02:26 PM #17 Phase 25 File APIProgress.cpp, Line 273
    Caching of files completed

    8:02:26 PM #18 Phase 36 File APIProgress.cpp, Line 273
    Burn process started at 2.4x (3,324 KB/s)

    8:02:26 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2343
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    8:02:26 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2343
    Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

    8:02:26 PM #21 Text 0 File Cdrdrv.cpp, Line 8120
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-ROM (0), Part Version: 0
    Disc Size: 120 mm, Maximum Rate: 2,52 Mbps (0 h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: ?
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 0 h (?)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    8:02:26 PM #22 Phase 98 File APIProgress.cpp, Line 273
    Start formatting disc before burning

    8:02:26 PM #23 SCSI -400 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B707000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x07 (Unknown)
    Sense Code: 0x27
    Sense Qual: 0x00
    CDB Data: 0x04 0x11 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x07 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x27 0x00

    8:02:26 PM #24 Phase 101 File APIProgress.cpp, Line 273
    Formatting disc failed

    8:02:26 PM #25 Text 0 File DVDPlusRW.cpp, Line 607
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    8:02:26 PM #26 CDR -400 File ThreadedTransferInterface.cpp, Line 1613
    Unspecified target error

    8:02:26 PM #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1613
    Could not perform start of Disc-at-once

    8:02:26 PM #28 Phase 38 File APIProgress.cpp, Line 273
    Burn process failed at 2.4x (3,324 KB/s)

    8:02:26 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 828
    DRM: DRM burn session terminated.

    8:02:26 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 857
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'DriversADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 7/16/2003 12:17:57 PM
    File 'DriversPXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 6:02:00 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogonAllocateCDROMs : 0 (Security Option)
     
    Last edited: Jun 7, 2004
  2. deadcat

    deadcat Regular member

    Joined:
    Apr 12, 2004
    Messages:
    710
    Likes Received:
    0
    Trophy Points:
    26
    i would delete your nero key

    to me it looks as though it failed when you tryed to fomat a dvd-rw for rewriting??
     
  3. 321sucker

    321sucker Regular member

    Joined:
    Mar 14, 2004
    Messages:
    380
    Likes Received:
    0
    Trophy Points:
    26
    Reinstall your ASPI layer
    Heres how:

    Here is the link to the ASPI utility for WIN XP which also has the ASPI chk tool within it.
    http://adaptec.com/worldwide/suppor...em/Microsoft+Windows+XP&filekey=aspi_v471.exe

    Copy and paste these instructions to notepad and print them, since you'll have to reboot to complete the installation.

    In advance, I aplogize if my instructions seem elementary, not all are pc savvy.

    First click on the link above and download the file to the default location which will be the root of the local disk. Here is the path, depending on your drive letter, may be "c" or "d". If it is local disk d then replace the c with the d.

    C:\adaptec\aspi or D:\adaptec\aspi

    Now go to windows explorer, by right clicking the windows start button and left clicking explore.

    Look for the adaptec folder

    Double Click on the adaptec folder, and to the right, in the split window, you'll see the aspi folder, now double click it. Now you will see a multitude of files.

    Look for the "aspiinst" icon and double click it. Follow the instructions.

    DOnt worry that it doesn't mention anything about ASPI for WIN XP, its OK.. DONT WORRY it will work.. 4 SHO..

    Once rebooted go back to the aspi folder and look for the "aspichk" icon, this is the ASPI check.

    Here are the instructions to get to the folder
    Double Click on the adaptec folder, you'll see the aspi folder, now double click it.

    At the bottom in very light letters you will either see ASPI is installed and fully operational, which is what you want or ASPI error or ASPI is not functional or.. you get the point.
    At any regard, you'll want the ASPI to be installed and fully operational.
    GOOD LUCK & hope this helps
     
    Last edited: Jun 6, 2004
  4. Vibroking

    Vibroking Member

    Joined:
    Jun 5, 2004
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    OK, replaced the ASPI as per you directions (and thanks, 321). Everything was OK and functional. Still made a coaster. Here's the error log.

    -------------------------------------------------------



    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/6/2002 11:01:14 AM
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
    Nero API version: 6.3.1.15
    Using interface version: 6.0.0.0
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <TEAC DVD+RW DV-W58E> Version: D.0J - HA 1 TA 1 - 6.3.1.15
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8483B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : TEAC DVD+RW DV-W58E atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST CD-RW GCE-8483B D: CDRom0
    TEAC DVD+RW DV-W58E E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1022MB (1047548kB)
    Free physical memory: 740MB (758432kB)
    Memory in use : 27 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    6.6.2004
    NeroAPI
    10:34:27 PM #1 Phase 111 File APIProgress.cpp, Line 273
    DVD-Video files sorted

    10:34:27 PM #2 Text 0 File Reader.cpp, Line 118
    Reader running

    10:34:27 PM #3 Text 0 File AudioCompilationImpl.cpp, Line 817
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    10:34:27 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    10:34:27 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    10:34:27 PM #6 Text 0 File Burncd.cpp, Line 3167
    Turn on Disc-At-Once, using DVD media

    10:35:03 PM #7 SCSI -1033 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x01

    10:35:36 PM #8 SCSI -1033 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x01

    10:37:00 PM #9 SCSI -1033 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x01

    10:37:33 PM #10 SCSI -1033 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x01

    10:37:43 PM #11 Text 0 File DlgWaitCD.cpp, Line 245
    Last possible write address on media: -196609 (954393:29.12, 4193919MB)
    Last address to be written: 995008 (221:06.58, 1943MB)

    10:37:43 PM #12 Text 0 File DlgWaitCD.cpp, Line 257
    Write in overburning mode: NO

    10:37:43 PM #13 Text 0 File DlgWaitCD.cpp, Line 2137
    Recorder: TEAC DVD+RW DV-W58E, Media type: DVD+RW
    Disc Manufacturer ID: , Media Type ID: , Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 0

    10:37:43 PM #14 Text 0 File DlgWaitCD.cpp, Line 418
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: unknown. Medium required by compilation: DVD+R/RW.)
    Disc not empty. Insert empty disc.
    (Medium in drive: DVD+R. Medium required by compilation: DVD+R/RW.)

    10:37:43 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 995008 (995008) = #995008/221:6.58
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 995008 blocks [TEAC DVD+RW DV-W58E ]
    1: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (0) not provided
    original disc pos #0 + 1 (1) = #1/0:0.1
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1 blocks [TEAC DVD+RW DV-W58E ]
    --------------------------------------------------------------

    10:37:43 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 983
    Prepare recorder [TEAC DVD+RW DV-W58E ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 2:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2037776384, ISRC ""
    2: TRM_DATA_MODE1, 2048/0x00, FilePos 2037776384 2037776384 2037778432, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    995008 | 2 | 0 | 0x00 | 0x41
    995008 | 2 | 1 | 0x00 | 0x41
    995009 | lead-out | 1 | 0x00 | 0x41

    10:37:43 PM #17 Phase 24 File APIProgress.cpp, Line 273
    Caching of files started

    10:37:43 PM #18 Text 0 File Burncd.cpp, Line 4177
    Cache writing successful.

    10:37:43 PM #19 Phase 25 File APIProgress.cpp, Line 273
    Caching of files completed

    10:37:43 PM #20 Phase 36 File APIProgress.cpp, Line 273
    Burn process started at 2.4x (3,324 KB/s)

    10:37:43 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2343
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    10:37:43 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2343
    Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

    10:37:43 PM #23 Text 0 File Cdrdrv.cpp, Line 8120
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-ROM (0), Part Version: 0
    Disc Size: 120 mm, Maximum Rate: 2,52 Mbps (0 h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: ?
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 0 h (?)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    10:37:43 PM #24 Phase 98 File APIProgress.cpp, Line 273
    Start formatting disc before burning

    10:37:43 PM #25 SCSI -400 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B707000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x07 (Unknown)
    Sense Code: 0x27
    Sense Qual: 0x00
    CDB Data: 0x04 0x11 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x07 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x27 0x00

    10:37:43 PM #26 Phase 101 File APIProgress.cpp, Line 273
    Formatting disc failed

    10:37:43 PM #27 Text 0 File DVDPlusRW.cpp, Line 607
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    10:37:43 PM #28 CDR -400 File ThreadedTransferInterface.cpp, Line 1613
    Unspecified target error

    10:37:43 PM #29 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1613
    Could not perform start of Disc-at-once

    10:37:43 PM #30 Phase 38 File APIProgress.cpp, Line 273
    Burn process failed at 2.4x (3,324 KB/s)

    10:37:43 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 828
    DRM: DRM burn session terminated.

    10:37:43 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 857
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 7/16/2003 12:17:57 PM
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/6/2002 11:01:08 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 6:02:00 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    Last edited: Jun 7, 2004
  5. Vibroking

    Vibroking Member

    Joined:
    Jun 5, 2004
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    Oh yeah- forgot to add. Got the famous "this disc is not empty" message again. Stuck it back in after it was ejected and then got the error message.
     
  6. Nephilim

    Nephilim Moderator Staff Member

    Joined:
    Feb 13, 2003
    Messages:
    14,942
    Likes Received:
    0
    Trophy Points:
    116
    I would highly recommend installing ASPI ver. 4.60. 4.71 is known to cause many problems whereas 4.60 is generally regarded as the most stable and compatible version.

    Here's a link for the download and a good informative guide:

    http://www.hazza.dsl.pipex.com/faq.htm#ASPI
     
  7. Nephilim

    Nephilim Moderator Staff Member

    Joined:
    Feb 13, 2003
    Messages:
    14,942
    Likes Received:
    0
    Trophy Points:
    116
    Vibroking,

    See the string of numbers at the very top of your logs? That's the serial # for your copy of Nero and it would be appreciated if you use the edit feature (the little pencil and paper pic at the top right of your posts) to remove it. Thanks :)
    _X_X_X_X_X_[small][​IMG]
    JMLS-166S/Plextor PX-708A/Plextor Premium[/small]
     
    Last edited: Jun 6, 2004
  8. 321sucker

    321sucker Regular member

    Joined:
    Mar 14, 2004
    Messages:
    380
    Likes Received:
    0
    Trophy Points:
    26
    Yes, please remove that serial number.

    WHat brand of media are you using?

     
    Last edited: Jun 6, 2004
  9. brobear

    brobear Guest

    Here is just an idea. Hope you're using XP as the operating system. Didn't see it mentioned. Sometimes we forget to do all the windows updates we should. SP1 (Service Pack One) doesn't come preinstalled. SP1 contains all the drivers one will normally need. I have SP1 and have never had to add ASPI or another of the often requested drivers, Patin Couffin. Windows Update should be set up for automatic notification of critical updates and the site should be visited on a scheduled basis to see whats new in downloads for windows.

    I would suggest using a RW disc until you get your problem resolved, saves damaging discs that can't be reused. Overlooked where it said failure to format. If things work properly, even if you have data on a RW, the system should quick format an RW if needed and record.

    What were you doing with the Nero when you got the error?

    Nephilim was right, Never put your serial out in the public domain. You should go back and edit it out.
    _X_X_X_X_X_[small][bold]'brobear'[/bold]

    [​IMG][/small]
     
    Last edited by a moderator: Jun 6, 2004
  10. brobear

    brobear Guest

    8:02:26 PM #12 Text 0 File DlgWaitCD.cpp, Line 418
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: unknown. Medium required by compilation: DVD+R/RW.)

    Also noticed the above, What media did you put in the disc drive?
     
  11. Nephilim

    Nephilim Moderator Staff Member

    Joined:
    Feb 13, 2003
    Messages:
    14,942
    Likes Received:
    0
    Trophy Points:
    116
    That's part of his problem. He's got a new Dell that came with a Teac W58 DVD +R/RW single format and from what I've been discovering online the things burn to +RW like a charm but they have a bad habit of choking on +R. I was at the Dell forum and there were a lot of pissed off people ranting about it.

    http://forums.afterdawn.com/thread_view.cfm/88037
     
  12. Vibroking

    Vibroking Member

    Joined:
    Jun 5, 2004
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    Serial number removed, didn't realize it was there.

    Media used is Verbatim.

    Windows is XP and is upto date.

    From all the reading I've been doing, I'm realizing that I am not the only one with this drive that has problems. It is a Dell and it doesn't look like they are going to do anything about the bum drives they are selling.

    Thank you for all your help. At this point I am considering the drive defective and cutting my losses.
     
  13. brobear

    brobear Guest

    Well, if they burn well with +RW and choke on +R, then it sounds like it's time to call in a tech. In one section the log said the disc wasn't recognized and in another wouldn't format. I was wondering if it was a +R or +RW in the drive when the problem occurred. Did you get the same error using both types of disc?

    The XP with SP1 eliminates the need for ASPI downloads with Nero. You obviously have SP1, considering you're all up to date.
     

Share This Page