we, i have dont the alchcol guide and uninstalled, reinstalled, changed burner, changed around ide from an secondary to on the hd with primary as slave, and still get the same error. here is my log maby someone can figure it out, motherboard is a Biostar p4m80prom7 thanks mj mj Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.7.5.1 Internal Version: 7, 7, 5, 1 Recorder: <LITE-ON DVDRW LH-20A1P> Version: KL02 - HA 1 TA 0 - 7.7.5.1 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <LITE-ON DVDRW LH-20A1P >Version: KL02 - HA 1 TA 0 - 7.7.5.1 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD2000JB-00EVA0 15.0 viadsk Port 2 ID 0 DMA: Off CdRomPeripheral : LITE-ON DVDRW LH-20A1P KL02 viadsk Port 2 ID 1 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW LH-20A1P D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2096620kB) Free physical memory: 1627MB (1666560kB) Memory in use : 20 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 28.2.2007 Burn DVD Image 2:58:47 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 2:58:48 PM #2 Text 0 File Burncd.cpp, Line 3465 Turn on Disc-At-Once, using DVD media 2:58:48 PM #3 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1797905 (399:32.05, 3511MB) 2:58:48 PM #4 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 2:58:48 PM #5 Text 0 File DlgWaitCD.cpp, Line 2912 Recorder: LITE-ON DVDRW LH-20A1P, Media type: DVD-R Disc Manufacturer: Prodis - cF02 Disc Application Code: 64, Disc Physical Code: 193 2:58:48 PM #6 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:58:48 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 823 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet) 2 indices, index0 (150) not provided original disc pos #0 + 1797906 (1797906) = #1797906/399:32.6 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1797756 blocks [D: LITE-ON DVDRW LH-20A1P] -------------------------------------------------------------- 2:58:48 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 1026 Prepare [D: LITE-ON DVDRW LH-20A1P] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3682111488, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 1797906 | 1797756 | 0x00 0 | 1 | 1 | 0x41 | 1797906 | 1797756 | 0x00 1797906 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 2:58:48 PM #9 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 2:58:48 PM #10 Phase 36 File dlgbrnst.cpp, Line 1760 Burn process started at 8x (11,080 KB/s) 3:01:39 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 2764 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 3:01:39 PM #12 Text 0 File DVDR.cpp, Line 3070 Recording mode: Sequential Recording Mode 3:01:39 PM #13 Text 0 File DVDR.cpp, Line 3226 Start write address at LBA 0 DVD high compatibility mode: Yes 3:01:39 PM #14 Text 0 File Cdrdrv.cpp, Line 9288 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 3:01:43 PM #15 SPTI -31 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x00) WinError(87) NeroError(-31) Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x22040040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 3:01:43 PM #16 SPTI -31 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x00) WinError(87) NeroError(-31) Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x06406c80: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 3:01:43 PM #17 Text 0 File MMC.cpp, Line 19969 Writer-Buffer for D: LITE-ON DVDRW LH-20A1P reduced to 32768Bytes 3:01:43 PM #18 SPTI -31 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x00) WinError(87) NeroError(-31) Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 00 00 00 00 10 00 00 00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x06406c80: Len x8000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 3:01:43 PM #19 CDR -31 File Writer.cpp, Line 301 Buffer too large D: LITE-ON DVDRW LH-20A1P 3:01:43 PM #20 Text 0 File DVDR.cpp, Line 3446 EndDAO: Last written address was -1 3:01:43 PM #21 Phase 38 File dlgbrnst.cpp, Line 1760 Burn process failed at 8x (11,080 KB/s) 3:01:44 PM #22 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 3:01:45 PM #23 Text 0 File Cdrdrv.cpp, Line 10529 DriveLocker: UnLockVolume completed 3:01:45 PM #24 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
loaded alcohol 1.9.6 4719 and it durned the dvd, (wouldnt the other day) so Im getting closer, but need Nero. thanks mj
I am not sure who your responses are for. My information was about the Via drivers for your motherboard.
Firmware update KLO5 available from here http://www.liteonit.com/DOWNLOADS/ODD/LH-20A1P/firmware/DR20KL05.zip DMA needs to be on, heres a guide to turn back on http://forums.afterdawn.com/thread_view.cfm/260038 Poor quality discs, try Verbatim or Sony (made in japan) Slow burn to 4X
ok, my system says DMA if avail on ide channels, (i have uninstalled let windows put back) I also updated dvd burner, and here is my latest log, thanks for all the help. I am confused why the log says dma off??? Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.7.5.1 Internal Version: 7, 7, 5, 1 Recorder: <LITE-ON DVDRW LH-20A1P> Version: KL0A - HA 1 TA 3 - 7.7.5.1 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <LITE-ON DVDRW LH-20A1P >Version: KL0A - HA 1 TA 3 - 7.7.5.1 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD2000JB-00EVA0 15.0 viadsk Port 2 ID 0 DMA: Off DiskPeripheral : MDT MD200EB-00CSF0 04.0 viadsk Port 2 ID 1 DMA: Off CdRomPeripheral : LITE-ON DVDRW LH-20A1P KL0A viadsk Port 3 ID 0 DMA: Off CdRomPeripheral : LITE-ON DVDRW SHW-160P6SPS0B viadsk Port 3 ID 1 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW LH-20A1P F: CDRom3 LITE-ON DVDRW SHW-160P6S G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2096620kB) Free physical memory: 1630MB (1669940kB) Memory in use : 20 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 2.3.2007 Burn DVD Image 8:54:34 AM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 8:54:35 AM #2 Text 0 File Burncd.cpp, Line 3465 Turn on Disc-At-Once, using DVD media 8:54:35 AM #3 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1797905 (399:32.05, 3511MB) 8:54:35 AM #4 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 8:54:35 AM #5 Text 0 File DlgWaitCD.cpp, Line 2912 Recorder: LITE-ON DVDRW LH-20A1P, Media type: DVD-R Disc Manufacturer: Prodis - cF02 Disc Application Code: 64, Disc Physical Code: 193 8:54:35 AM #6 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:54:35 AM #7 Text 0 File ThreadedTransferInterface.cpp, Line 823 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet) 2 indices, index0 (150) not provided original disc pos #0 + 1797906 (1797906) = #1797906/399:32.6 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1797756 blocks [F: LITE-ON DVDRW LH-20A1P] -------------------------------------------------------------- 8:54:35 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 1026 Prepare [F: LITE-ON DVDRW LH-20A1P] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3682111488, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 1797906 | 1797756 | 0x00 0 | 1 | 1 | 0x41 | 1797906 | 1797756 | 0x00 1797906 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 8:54:35 AM #9 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 8:54:35 AM #10 Phase 36 File dlgbrnst.cpp, Line 1760 Burn process started at 4x (5,540 KB/s) 8:55:46 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 2764 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 8:55:46 AM #12 Text 0 File DVDR.cpp, Line 3070 Recording mode: Sequential Recording Mode 8:55:46 AM #13 Text 0 File DVDR.cpp, Line 3226 Start write address at LBA 0 DVD high compatibility mode: Yes 8:55:46 AM #14 Text 0 File Cdrdrv.cpp, Line 9288 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:55:47 AM #15 SPTI -31 File SCSIPassThrough.cpp, Line 179 CdRom3: SCSIStatus(x00) WinError(87) NeroError(-31) Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x077b0040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8:55:47 AM #16 SPTI -31 File SCSIPassThrough.cpp, Line 179 CdRom3: SCSIStatus(x00) WinError(87) NeroError(-31) Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x06909e00: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8:55:47 AM #17 Text 0 File MMC.cpp, Line 19969 Writer-Buffer for F: LITE-ON DVDRW LH-20A1P reduced to 32768Bytes 8:55:47 AM #18 SPTI -31 File SCSIPassThrough.cpp, Line 179 CdRom3: SCSIStatus(x00) WinError(87) NeroError(-31) Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 00 00 00 00 10 00 00 00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x06909e00: Len x8000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8:55:47 AM #19 CDR -31 File Writer.cpp, Line 301 Buffer too large F: LITE-ON DVDRW LH-20A1P 8:55:47 AM #20 Text 0 File DVDR.cpp, Line 3446 EndDAO: Last written address was -1 8:55:47 AM #21 Phase 38 File dlgbrnst.cpp, Line 1760 Burn process failed at 4x (5,540 KB/s) 8:55:48 AM #22 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 8:55:49 AM #23 Text 0 File Cdrdrv.cpp, Line 10529 DriveLocker: UnLockVolume completed 8:55:49 AM #24 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
ok, I removed my VIA drivers through add and remove programs as suggested in the other forum thread, windows put its drivers in and now in the device advanced settings UNDER(dma if availible)it says udma mode 2, instead of not applicable and now i am burning a DVD with nero. I to have hours in this and a pile of dvds and i am pissed at the motherboard and nero, because Alcohol 120 burner DVDs but i need Nero to do my backups. and want to THANK everyone here for the great help. THAAANNNNNKKKKKSSSSS