I'm unable to install the ASPI drivers on my computer. I have Windows XP Pro, a TDK 12/10/32 CD-burner, and a Lite-on 16x DVD-Rom. I don't know if this is important but the TDK drive is on Primary IDE by itself, the Lite-On is on Secondary IDE by itself, and the hard drive is connected to a Promise Ultra 100 TX2 controller card. I used the ASPI drivers from the DVD2SVCD.org website and I've also tried using ForceASPI 1.7 as well (both are Adaptec 4.60). The first thing I did was use ASPIcheck. It showed my OS as Windows NT and everything was marked "N/A". It said, "ASPI is not properly installed. One or more components have been replaced with older versions of the software". Then I proceeded to install ASPI. I opened the Aspi.bat and when it tried to copy the files it said the "system cannot find the path specified". When I used ForceASPI it said the files were installed, but after rebooting and using ASPIcheck I still get N/A for everything and the same message. I have CloneCD and Nero and they both work fine. But I can't use the DVD2SVCD or DVDx ripping programs. What's wrong?