1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Can't transfer files with FlashFXP

Discussion in 'Xbox - General discussion' started by jxc241, Mar 28, 2004.

  1. jxc241

    jxc241 Member

    Joined:
    Dec 29, 2003
    Messages:
    40
    Likes Received:
    0
    Trophy Points:
    16
    I am having trouble transfering files over to my xbox. I am using to e cards, one on board and one PCI card. I can connect to the xbox with FlashFXP and look around the files stored on my xbox but when I go to transfer a file to the xbox it starts out at about 8 k/sec then slowly drops down to 0 k/sec and then just sits idle. I have followed the instructions setting up the network from this link http://www.xbox-scene.com/articles/network-2-cards.php
    Any ideas. Please be detailed because I'm not great with the networking stuff.
     
  2. jxc241

    jxc241 Member

    Joined:
    Dec 29, 2003
    Messages:
    40
    Likes Received:
    0
    Trophy Points:
    16
    This is some of the errors I am getting:
    WinSock 2.0
    Connecting to 192.168.0.3
    Connected to 192.168.0.3 -> IP=192.168.0.3 PORT=21
    220 Please enter your login name now.
    USER xbox
    331 Password required for xbox.
    PASS (hidden)
    230 User xbox logged in , proceed.
    SYST
    215 UNIX Type: L8
    REST 100
    502 rest is not implemented.
    This site may not allow file resuming
    PWD
    257 "/" is current directory
    TYPE A
    200 Type set to ASCII.
    PASV
    502 pasv is not implemented.
    PORT 192,168,0,1,13,81
    200 Port command ok.
    LIST
    150 Opening ASCII data connection for ls /.
    226 Transfer finished successfully. Data connection closed.
    List Complete: 385 bytes in 0.13 (0.38 KBps)
    CWD F
    250 "/F/" is current directory.
    PWD
    257 "/F/" is current directory
    PASV
    502 pasv is not implemented.
    PORT 192,168,0,1,13,84
    200 Port command ok.
    LIST
    150 Opening ASCII data connection for ls /F/.
    226 Transfer finished successfully. Data connection closed.
    List Complete: 421 bytes in 0.09 (0.41 KBps)
    CWD Pics
    250 "/F/Pics/" is current directory.
    PWD
    257 "/F/Pics/" is current directory
    PASV
    502 pasv is not implemented.
    PORT 192,168,0,1,13,85
    200 Port command ok.
    LIST
    150 Opening ASCII data connection for ls /F/Pics/.
    226 Transfer finished successfully. Data connection closed.
    List Complete: 137 bytes in 0.09 (0.13 KBps)
    PASV
    502 pasv is not implemented.
    PORT 192,168,0,1,13,89
    200 Port command ok.
    STOR evox.ini
    150 Opening BINARY data connection for F:\Pics\evox.ini
    Connection lost: 192.168.0.3
    Attempting to Reconnect.
    Connecting to 192.168.0.3 #1
    Connected to 192.168.0.3 -> IP=192.168.0.3 PORT=21
    220 Please enter your login name now.
    USER xbox
    331 Password required for xbox.
    PASS (hidden)
    230 User xbox logged in , proceed.
    SYST
    215 UNIX Type: L8
    REST 100
    502 rest is not implemented.
    This site may not allow file resuming
    PWD
    257 "/" is current directory
    CWD /F/Pics/
    250 "/F/Pics/" is current directory.
    PWD
    257 "/F/Pics/" is current directory
    List (cached)
    List Complete.
    TYPE A
    200 Type set to ASCII.
    PASV
    502 pasv is not implemented.
    PORT 192,168,0,1,13,125
    200 Port command ok.
    STOR evox.ini
    426 Connection closed , file opening failed.
    Transfer Failed!
    CWD /
    250 "/" is current directory.
    PWD
    257 "/" is current directory
    List (cached)
    List Complete.
    Transfer queue completed
    1 File failed to transfer


    The other thing is that some times I can go in through FlashFXP and see the transfered file but it just 0 Kb in size. Someone please help before I pull what little hair I have left out.
     
  3. jxc241

    jxc241 Member

    Joined:
    Dec 29, 2003
    Messages:
    40
    Likes Received:
    0
    Trophy Points:
    16
    Okay, I don't know exactly how but I figured it out. I think i just changed the IP/TCP value on the ecard on my pc. I just changed the last value in the Obtain IP.... Was 192.168.0.3 Now 192.168.0.5

    Don't know why it worked but it did.
     

Share This Page