1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

CD Loader Procedures .: help please :.

Discussion in 'PS2 - Software boot discussion' started by RomReader, May 1, 2004.

  1. RomReader

    RomReader Member

    Joined:
    Apr 20, 2004
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    11
    I have followed the procedures below to the tee but I am missing something here. I downloaded the new Hitman Contracts cd loader and cannot get it to work. can someone post a simplified method to creating and using the CD Loader ?

    Here are the procedures from swapmagicfix.com just so that everyone knows I did read it.

    1) CDLoader FiXes are images that must be burned to a CDR and swapped in-between your original Swap Magic 2.0 CD and your PS2 game back-up.
    With that being stated, insert your Swap Magic CD Disc into your PS2 and at the prompt pictured use your Flip-Top PS2 Cover or Slide Card tool
    to switch your Swap Magic CD Disc for your CDLoader CDR disc. Once the swap is made, press X on the controller to load the CDLoader software.

    2) At THIS prompt you have (2) choices: You can press X to go to an OPTiON menu used to select specific loader OPTiONs for the titles listed on our
    main page that require them, or you can use your Flip-Top PS2 Cover or Slide Card tool to switch your CDLoader CDR with your 1:1 CDR back-up
    game, followed by pressing X to load it and enjoy! For loading DVDR back-up games proceed to step #3 below without pressing anything yet.

    3) If you wish to play a 1:1 DVDR game back-up at THIS prompt you will have to press EJECT on your PS2 and then insert your Swap Magic DVD Disc
    and press X on the controller to reach THIS prompt. Now, use your Flip-Top PS2 Cover or Slide Card tool to switch your original Swap Magic DVD Disc
    with your 1:1 DVDR game back-up and press X to load it and enjoy!

    NOTE: As stated above, our CDLoader FiXes are images that must be burned to a CDR and swapped in-between your original Swap Magic 2.0 CD and your PS2
    game back-up. They can NOT be burned to the same CDR disc as your PS2 game back-up, and if you need help burning PS2 game back-ups click HERE.

     
  2. Hanedrick

    Hanedrick Regular member

    Joined:
    Apr 14, 2003
    Messages:
    845
    Likes Received:
    0
    Trophy Points:
    26
    Hey, first of all make sure you have the right cdloader for your ps2 version. If you have a version 1-6 download the version 1-6 cdloader. if you have version 7+ downloade the version 7 cdloader. when you have downloaded the cdloader you can burn it using Nero by following the guide http://www.afterdawn.com/guides/archive/bin_cue_with_nero.cfm
    once you have burned the cdloader follow these boot instructions for playing dvd-r backups:

    1. Load the swap magic cd version
    2. Once it's loaded and the disc has stopped spinning, use the slide card or fliptop to swap the swap magic disc and the cdloader.
    3. Press x and the cdloader should load
    4. Once the cdloader has loaded press eject, take out the cdloader and replace it with the swap magic dvd or a high toc DVD original. Press eject to close the cd drive.
    5. Wait 15 seconds
    6. Press X
    7. Wait another 15 seconds
    8. Now, use the slide-card or fliptop to swap the swap magic dvd or high toc original with your DVD-R backup(in your case hitman.)
    9. once the swap has been made press X
    10. If you did everything right your backup should load
     

Share This Page