1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Could not perform end of disk-at-once

Discussion in 'DVDR' started by J273, Jan 7, 2007.

  1. J273

    J273 Guest

    Hi guys

    Im trying to backup a dual layer disk.....Ive just got jold of some disks but the problem ive got is everytime i try to burn thr image ive created with either Nero or alcohol i get the same error....Could not perform end of disk-at-once..Ive tried extracting the image and creating a new .UDF image but still get the same problem....This is the log from nero

    NT-SPTI used
    Nero Version: 7.2.3.2
    Internal Version: 7, 2, 3, 2

    Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 0 - 7.2.3.2
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 0 - 7.2.3.2
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-106 atapi Port 0 ID 1 DMA: On
    DiskPeripheral : WDC WD3200JS-00PDB0 atapi Port 1 ID 0 DMA: On
    DiskPeripheral : ST3808110AS atapi Port 3 ID 0 DMA: On
    DiskPeripheral : SAMSUNG SP2004C atapi Port 4 ID 0 DMA: On
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 6 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVDRAM GSA-4163B M: CDRom0
    PIONEER DVD-ROM DVD-106 N: CDRom1
    AXV CD/DVD-ROM O: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 1022MB (1046960kB)
    Free physical memory: 373MB (382828kB)
    Memory in use : 63 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    7.1.2007
    UDF compilation
    19:13:50 #1 Text 0 File Isodoc.cpp, Line 6427
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : TRUE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    UDF Mode : pure
    UDF Options : automatic
    UDF Revision : 1.02
    UDF Partition Type : physical

    19:13:50 #2 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 81920KB of Memory

    19:13:50 #3 Text 0 File Reader.cpp, Line 124
    Reader running

    19:13:50 #4 Text 0 File Writer.cpp, Line 113
    Writer M: HL-DT-ST DVDRAM GSA-4163B running

    19:13:50 #5 Text 0 File Burncd.cpp, Line 3400
    Turn on Disc-At-Once, using DVD media

    19:13:50 #6 Text 0 File DlgWaitCD.cpp, Line 289
    Last possible write address on media: 4173823 (927:30.73, 8151MB)
    Last address to be written: 4160735 (924:36.35, 8126MB)

    19:13:50 #7 Text 0 File DlgWaitCD.cpp, Line 301
    Write in overburning mode: NO (enabled: CD)

    19:13:50 #8 Text 0 File DlgWaitCD.cpp, Line 2715
    Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R9 Double Layer
    Disc Manufacturer ID: RICOHJPN, Media Type ID: D01, Product revision number: 2
    Disc Application Code: 0, Extended Information Indicators: 3

    19:13:50 #9 Text 0 File DlgWaitCD.cpp, Line 473
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    19:13:50 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 4160736 (4160736) = #4160736/924:36.36
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4160736 blocks [M: HL-DT-ST DVDRAM GSA-4163B]
    --------------------------------------------------------------

    19:13:50 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [M: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8521187328, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    4160736 | lead-out | 1 | 0x41 | 0x00

    19:13:50 #12 Text 0 File SCSIPassThrough.cpp, Line 39
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    19:13:50 #13 Text 0 File SCSIPassThrough.cpp, Line 84
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    19:13:50 #14 Phase 24 File dlgbrnst.cpp, Line 1730
    Caching of files started

    19:13:50 #15 Text 0 File Burncd.cpp, Line 4231
    Cache writing successful.

    19:13:50 #16 Phase 25 File dlgbrnst.cpp, Line 1730
    Caching of files completed

    19:13:50 #17 Phase 28 File dlgbrnst.cpp, Line 1730
    Speed measurement started

    19:13:51 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2707
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    19:16:00 #19 Text 0 File WriterStatus.cpp, Line 116
    <M: HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 4160736 (3F7CE0h), length 0 blocks

    19:16:00 #20 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    19:16:00 #21 Phase 29 File dlgbrnst.cpp, Line 1679
    Speed measurement completed: 46.5x (64,266 KB/s)

    19:16:00 #22 Phase 36 File dlgbrnst.cpp, Line 1730
    Burn process started at 2.4x (3,324 KB/s)

    19:16:01 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    19:16:01 #24 Text 0 File DVDPlusDualLayer.cpp, Line 646
    L0 Data Zone Capacity not set.
    Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)

    19:16:01 #25 CDR -1205 File DVDPlusDualLayer.cpp, Line 662
    Burning Layer 1

    19:16:01 #26 Text 0 File DVDPlusDualLayer.cpp, Line 672
    Start writing layer 1 at address 0 (0h)
    Recording mode: unknown Recording Mode

    19:16:01 #27 Text 0 File Cdrdrv.cpp, Line 8995
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R DL (14), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
    Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: FCFFFF h
    End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: D01
    Product revision number: 2
    Number of Physical format information bytes in use in ADIP up to byte 63: 64
    Media Specific [16..63]:
    00 00 03 52 49 43 4F 48 - 4A 50 4E 44 30 31 02 40 ...RICOHJPND01.@
    25 25 37 10 00 2C 6C 00 - 2C 6C 20 1F 0C 0C 14 14 %%7..,l.,l......
    02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................

    19:16:01 #28 Text 0 File DVDR.cpp, Line 5941
    Drive: HL-DT-ST DVDRAM GSA-4163B
    Book Type request [LG]: DVD-ROM
    Changing the Book Type was finished successfully, return code 0

    19:16:01 #29 CDR -1207 File DVDR.cpp, Line 5871
    Book Type automatically set to: DVD-ROM

    19:16:01 #30 Text 0 File DVDPlusRW.cpp, Line 650
    Start write address at LBA 0
    DVD high compatibility mode: No

    19:16:02 #31 SPTI -1135 File SCSIPassThrough.cpp, Line 291
    M: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 00 00 40 00 00 20 00 00 00
    Sense Area: 0x71 00 03 00 00 00 00 10 35 2D 00 0E 0C
    Buffer x037a0000: Len x10000
    0x09 00 02 00 F1 00 01 00 08 27 76 00 40 00 00 00
    0x00 10 D7 07 01 07 13 0D 32 00 00 00 01 00 00 00
    0x00 00 00 00 00 00 00 00 E2 02 00 00 00 00 00 00

    19:16:02 #32 CDR -1135 File Writer.cpp, Line 302
    Write error
    M: HL-DT-ST DVDRAM GSA-4163B

    19:16:02 #33 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    19:16:02 #34 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    19:16:08 #35 CDR -1135 File WriterStatus.cpp, Line 167
    Write error
    M: HL-DT-ST DVDRAM GSA-4163B

    19:16:08 #36 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    19:16:08 #37 Phase 38 File dlgbrnst.cpp, Line 1730
    Burn process failed at 2.4x (3,324 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 25/08/2006 03:47:00
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02
    File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 25/08/2006 03:47:00 (Prassi/Veritas driver for win 2K)


    And this is some info on the media:
    ----------------------------------------------------------------------------
    Unique Disc Identifier : [DVD+R-DL:RICOHJPN-D01-002]
    ----------------------------------------------------------------------------
    Disc & Book Type : [DVD+R DL] - [DVD+R DL]
    Manufacturer Name : [Ricoh Co. Ltd.]
    Manufacturer ID : [RICOHJPN]
    Media Type ID : [D01]
    Product Revision : [002]
    Blank Disc Capacity : [Not Supported By Method 2]
    Recording Speeds : [2.4x , 3.3x-8x]
    [Method 2 Might Not Always Detect All Speeds]

    The drives an LG GSA 4163B with latest firmware.


    Does anyione have any ideas as to what the problem could be ?


    Thanks alot
     
  2. fasfrank

    fasfrank Active member

    Joined:
    Oct 15, 2003
    Messages:
    4,117
    Likes Received:
    0
    Trophy Points:
    66
    Your firmware is one version behind:
    http://forum.rpc1.org/dl_firmware.php?download_id=1973

    I'd update Nero to the newest version.

    Not quite sure why you are using UDF format although it does seem to be working up to the point you try to burn.

    This is the error:
    Normally this is a sign of poor or incompatable media. I'm not a D/L burner so I have not used the media you are using. You may want to look in the media forum and see what is currently the best.

    I would try updating Nero and then double checking that UDF format you are using. I may be way off here but that seems wrong.
    I would try a single layer burn just to see if you can get that to work. That would tell us if it's media related or not.

    You could also give ImgBurn a try. It's one of the best DL burners available and it's free.
    http://www.imgburn.com/
     
  3. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Hi J273
    Here's a few suggestions:
    Nero Version: 7.2.3.2
    Update Nero to the latest 7.5.0.9a.

    Another free good burn program to try would be ImgBurn. Burns iso's or you can use the build mode for other formats.

    File 'Drivers\CDRALW2K.SYS'
    Roxio and Nero don't always play well. So uninstall Roxio and run the Zap Tool.

    The burn fails right off the bat - what are you trying to burn - like data or a dvd?

    edit to add: Hi fasfrank - ya beat me :)
     
    Last edited: Jan 7, 2007
  4. J273

    J273 Guest

  5. J273

    J273 Guest

    Just tried imgburn....seems a pretty good app


    Still get an error though do you guys make anything of this from the log?

    I 22:26:54 ImgBurn Version 2.1.0.0 started!
    I 22:26:54 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)
    W 22:26:54 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!
    I 22:26:54 Initialising SPTI...
    I 22:26:54 Searching for SCSI / ATAPI devices...
    I 22:26:54 Found 2 DVD-ROMs and 1 DVD±RW/RAM!
    W 22:27:49 User accepted disc space warning and is attempting to overburn!
    I 22:27:49 Operation Started!
    I 22:27:49 Source File: C:\Documents and Settings\Jamie\Desktop\CNDV_60M_EW_2_A.mds
    I 22:27:49 Source File Sectors: 4,160,480 (MODE1/2048)
    I 22:27:49 Source File Size: 8,520,663,040 bytes
    I 22:27:49 Source File Volume Identifier: CNDV_60M_EW_2_A
    I 22:27:49 Source File File System(s): ISO9660, UDF (1.02)
    I 22:27:49 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-4163B A106 (M:) (ATA)
    I 22:27:49 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-02) (Speeds: 2.4x)
    I 22:27:49 Destination Media Sectors: 3,460,736
    I 22:27:49 Write Mode: DVD
    I 22:27:49 Write Type: DAO
    I 22:27:49 Write Speed: 1x
    I 22:27:49 Link Size: Auto
    I 22:27:49 Test Mode: No
    I 22:27:49 BURN-Proof: Enabled
    I 22:27:50 Optimal L0 Data Zone Capacity: 2,080,240
    I 22:27:50 Optimal L0 Data Zone Method: ECC Block Boundary
    I 22:27:54 Filling Buffer...
    I 22:27:54 Writing LeadIn...
    W 22:27:54 Failed to Write Sectors 64 - 95 - Write Error
    W 22:27:54 Retrying (1 of 20)...
    W 22:27:54 Retry Failed - Invalid Address For Write
    W 22:27:54 Retrying (2 of 20)...
    W 22:27:54 Retry Failed - Invalid Address For Write
    W 22:27:54 Retrying (3 of 20)...
    W 22:27:54 Retry Failed - Invalid Address For Write
    W 22:27:54 Retrying (4 of 20)...
    W 22:27:54 Retry Failed - Invalid Address For Write
    W 22:27:54 Retrying (5 of 20)...
    W 22:27:54 Retry Failed - Invalid Address For Write
    W 22:27:54 Retrying (6 of 20)...
    W 22:27:54 Retry Failed - Invalid Address For Write
    W 22:27:54 Retrying (7 of 20)...
    W 22:27:54 Retry Failed - Invalid Address For Write
    W 22:27:54 Retrying (8 of 20)...
    W 22:27:54 Retry Failed - Invalid Address For Write
    W 22:27:54 Retrying (9 of 20)...
    W 22:27:54 Retry Failed - Invalid Address For Write
    W 22:27:54 Retrying (10 of 20)...
    W 22:27:54 Retry Failed - Invalid Address For Write
    W 22:27:54 Retrying (11 of 20)...
    W 22:27:54 Retry Failed - Invalid Address For Write
    W 22:27:54 Retrying (12 of 20)...
    W 22:27:54 Retry Failed - Invalid Address For Write
    W 22:27:54 Retrying (13 of 20)...
    W 22:27:54 Retry Failed - Invalid Address For Write
    W 22:27:54 Retrying (14 of 20)...
    W 22:27:54 Retry Failed - Invalid Address For Write
    W 22:27:54 Retrying (15 of 20)...
    W 22:27:54 Retry Failed - Invalid Address For Write
    W 22:27:54 Retrying (16 of 20)...
    W 22:27:54 Retry Failed - Invalid Address For Write
    W 22:27:54 Retrying (17 of 20)...
    W 22:27:54 Retry Failed - Invalid Address For Write
    W 22:27:54 Retrying (18 of 20)...
    W 22:27:54 Retry Failed - Invalid Address For Write
    W 22:27:54 Retrying (19 of 20)...
    W 22:27:54 Retry Failed - Invalid Address For Write
    W 22:27:54 Retrying (20 of 20)...
    W 22:27:54 Retry Failed - Invalid Address For Write
    E 22:27:55 Failed to Write Sectors 64 - 95 - Write Error
    I 22:27:55 Synchronising Cache...
    I 22:27:56 Closing Track...
    I 22:28:01 Finalising Disc...
    W 22:28:03 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Write Error
    E 22:28:07 Finalise Disc Failed! - Reason: Write Error
    E 22:28:07 Failed to Write Image!
    E 22:28:07 Operation Failed! - Duration: 00:00:17
    I 22:28:07 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x)
    I 22:30:03 Operation Started!
    I 22:30:03 Source File: C:\Documents and Settings\Jamie\Desktop\CNDV_60M_EW_2_A.mds
    I 22:30:03 Source File Sectors: 4,160,480 (MODE1/2048)
    I 22:30:03 Source File Size: 8,520,663,040 bytes
    I 22:30:03 Source File Volume Identifier: CNDV_60M_EW_2_A
    I 22:30:03 Source File File System(s): ISO9660, UDF (1.02)
    I 22:30:03 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-4163B A106 (M:) (ATA)
    I 22:30:03 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-02) (Speeds: 2.4x)
    I 22:30:03 Destination Media Sectors: 4,173,824
    I 22:30:03 Write Mode: DVD
    I 22:30:03 Write Type: DAO
    I 22:30:03 Write Speed: 1x
    I 22:30:03 Link Size: Auto
    I 22:30:03 Test Mode: No
    I 22:30:03 BURN-Proof: Enabled
    I 22:30:04 Optimal L0 Data Zone Capacity: 2,080,256
    I 22:30:04 Optimal L0 Data Zone Method: Copied From Original Disc
    I 22:30:23 Filling Buffer...
    I 22:30:24 Writing LeadIn...
    W 22:30:24 Failed to Write Sectors 32 - 63 - Invalid Address For Write
    W 22:30:24 Retrying (1 of 20)...
    W 22:30:24 Retry Failed - Invalid Address For Write
    W 22:30:24 Retrying (2 of 20)...
    W 22:30:24 Retry Failed - Invalid Address For Write
    W 22:30:24 Retrying (3 of 20)...
    W 22:30:24 Retry Failed - Invalid Address For Write
    W 22:30:24 Retrying (4 of 20)...
    W 22:30:24 Retry Failed - Invalid Address For Write
    W 22:30:24 Retrying (5 of 20)...
    W 22:30:24 Retry Failed - Invalid Address For Write
    W 22:30:24 Retrying (6 of 20)...
    W 22:30:24 Retry Failed - Invalid Address For Write
    W 22:30:24 Retrying (7 of 20)...
    W 22:30:24 Retry Failed - Invalid Address For Write
    W 22:30:24 Retrying (8 of 20)...
    W 22:30:24 Retry Failed - Invalid Address For Write
    W 22:30:24 Retrying (9 of 20)...
    W 22:30:24 Retry Failed - Invalid Address For Write
    W 22:30:24 Retrying (10 of 20)...
    W 22:30:24 Retry Failed - Invalid Address For Write
    W 22:30:24 Retrying (11 of 20)...
    W 22:30:24 Retry Failed - Invalid Address For Write
    W 22:30:24 Retrying (12 of 20)...
    W 22:30:24 Retry Failed - Invalid Address For Write
    W 22:30:24 Retrying (13 of 20)...
    W 22:30:24 Retry Failed - Invalid Address For Write
    W 22:30:24 Retrying (14 of 20)...
    W 22:30:24 Retry Failed - Invalid Address For Write
    W 22:30:24 Retrying (15 of 20)...
    W 22:30:24 Retry Failed - Invalid Address For Write
    W 22:30:24 Retrying (16 of 20)...
    W 22:30:24 Retry Failed - Invalid Address For Write
    W 22:30:24 Retrying (17 of 20)...
    W 22:30:24 Retry Failed - Invalid Address For Write
    W 22:30:24 Retrying (18 of 20)...
    W 22:30:24 Retry Failed - Invalid Address For Write
    W 22:30:24 Retrying (19 of 20)...
    W 22:30:24 Retry Failed - Invalid Address For Write
    W 22:30:24 Retrying (20 of 20)...
    W 22:30:24 Retry Failed - Invalid Address For Write
    E 22:30:25 Failed to Write Sectors 32 - 63 - Invalid Address For Write
    E 22:30:25 Next Writable Address: 0
    I 22:30:25 Synchronising Cache...
    I 22:30:26 Closing Track...
    I 22:30:30 Finalising Disc...


    Thanks

     
  6. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Still looking like the media. Ricoh has decent single layer media but dual layer is a different story.
    For dual layer use Verbatim only.

    What are you trying to burn? And how did you create the image to burn?
    Trying to rule that out too.
     
  7. J273

    J273 Guest

    Im tying to backup a car navigation cd as mines getting a little tatty.

    Ive tried creating the image with alcohol /nero and am just trying dvd decrypter

    Ive also tried it just on my lappy with a dual layer burner and get the same rsults so must be media.


    Think ill go with Verbatim then have heard good things about this media

    Thanks for th ideas info guys
     
  8. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Ah a car navigation dvd. This might be part of the problem too.
    They can be a little tricky but I can't be of any help w/ them cause I've never done one. They contain data & video.
    Tried to find some other threads on how to back up them up but couldn't right off the bat.

    I'd still switch to the Verbs - best dual layer media.

    Try those Ricoh on a dvd (movie) and see how that goes.
     

Share This Page