1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Could not perform start of Disc-at-Once

Discussion in 'Nero discussion' started by madis, Jun 10, 2007.

  1. madis

    madis Member

    Joined:
    Jun 10, 2007
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Hi,
    I have a problem with my TSSTcorp CD/DVDW SH-S182M SCSI CdRom Device CD/DVD burning device. It's a Toshiba-Samsung product. I'm using NERO OEM 6.6.1.15 and every time i try to burn a data DVD(or any DVD) i get this error message "Could not perform start of Disc-at-Once". When i hit the Burn button the disc in the drive even doesn't spin and after few seconds drive ejects it(even on lower speeds). I am using Philips DVD+RW and also tried Platinum Plus DVD+RW.

    Everything works with CDs

    I appreciate your help.



    Here is my endless error log:

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26.10.2004 19:35:32
    Nero Version: 6.6.0.19
    Internal Version: 6, 6, 0, 19d
    (Nero Express)
    Recorder: <TSSTcorp CD/DVDW SH-S182M>Version: SB00 - HA 4 TA 1 - 6.6.0.19
    Adapter driver: <JRAID> HA 4
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <CH3277P YLU834M >Version: 1.0 - HA 5 TA 0 - 6.6.0.19
    Adapter driver: <ayd0izgb> HA 5

    === Scsi-Device-Map ===
    DiskPeripheral : SATA WDC WD2500 JRAID Port 4 ID 0 DMA: Off
    CdRomPeripheral : TSSTcorpCD/DVDW SH-S182MSB00 JRAID Port 4 ID 1 DMA: Off
    CdRomPeripheral : CH3277P YLU834M 1.0 ayd0izgb Port 5 ID 0 DMA: Off

    === CDRom-Device-Map ===
    TSSTcorp CD/DVDW SH-S182M D: CDRom0
    CH3277P YLU834M E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 2047MB (2096620kB)
    Free physical memory: 1523MB (1559724kB)
    Memory in use : 25 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    2.6.2007
    ISO compilation
    20:37:47 #1 Text 0 File Isodoc.cpp, Line 6368
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    20:37:47 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    20:37:47 #3 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    20:37:47 #4 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    20:37:48 #5 Text 0 File DlgWaitCD.cpp, Line 272
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 607 ( 0:08.07, 1MB)

    20:37:48 #6 Text 0 File DlgWaitCD.cpp, Line 284
    Write in overburning mode: NO (enabled: DVD)

    20:37:48 #7 Text 0 File DlgWaitCD.cpp, Line 2494
    Recorder: TSSTcorp CD/DVDW SH-S182M, Media type: DVD+RW
    Disc Manufacturer ID: MBIPG101, Media Type ID: W04, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 1

    20:37:48 #8 Text 0 File DlgWaitCD.cpp, Line 450
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    20:37:48 #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 608 (608) = #608/0:8.8
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 608 blocks [TSSTcorp CD/DVDW SH-S182M]
    --------------------------------------------------------------

    20:37:48 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [TSSTcorp CD/DVDW SH-S182M] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1245184, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    608 | lead-out | 1 | 0x41 | 0x00

    20:37:48 #11 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    20:37:48 #12 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    20:37:48 #13 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    20:37:48 #14 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5 540 KB/s)

    20:37:48 #15 SCSI -1066 File Cdrdrv.cpp, Line 1183
    SCSI Exec, HA 4, TA 1, LUN 0, buffer 0x03B75400
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    20:37:48 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    20:37:48 #17 Text 0 File Cdrdrv.cpp, Line 8926
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+RW (9), Part Version: 1.1x (2)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 1 h
    Disc Manufacturer ID: MBIPG101
    Media type ID: W04
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 57
    Media Specific [16..63]:
    00 00 01 4D 42 49 50 47 - 31 30 31 57 30 34 00 39 ...MBIPG101W04.9
    23 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #...............
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    20:37:48 #18 Text 0 File Cdrdrv.cpp, Line 8926
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+RW (9), Part Version: 1.1x (2)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 1 h
    Disc Manufacturer ID: MBIPG101
    Media type ID: W04
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 57
    Media Specific [16..63]:
    00 00 01 4D 42 49 50 47 - 31 30 31 57 30 34 00 39 ...MBIPG101W04.9
    23 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #...............
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    20:37:48 #19 Text 0 File Cdrdrv.cpp, Line 8926
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+RW (9), Part Version: 1.1x (2)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 1 h
    Disc Manufacturer ID: MBIPG101
    Media type ID: W04
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 57
    Media Specific [16..63]:
    00 00 01 4D 42 49 50 47 - 31 30 31 57 30 34 00 39 ...MBIPG101W04.9
    23 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #...............
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    20:37:48 #20 Text 0 File DVDR.cpp, Line 7119
    Drive: TSSTcorp CD/DVDW SH-S182M
    Book Type request [TSST]: DVD-ROM
    Changing the Book Type was finished successfully, return code 0

    20:37:48 #21 CDR -1207 File DVDR.cpp, Line 5383
    Book Type automatically set to: DVD-ROM

    20:37:48 #22 Phase 98 File dlgbrnst.cpp, Line 1832
    Start formatting disc before burning

    20:37:48 #23 SCSI -1065 File Cdrdrv.cpp, Line 1183
    SCSI Exec, HA 4, TA 1, LUN 0, buffer 0x03B75200
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x20
    Sense Qual: 0x00
    CDB Data: 0x04 0x11 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x20 0x00

    20:37:48 #24 Phase 101 File dlgbrnst.cpp, Line 1832
    Formatting disc failed

    20:37:48 #25 Text 0 File DVDPlusRW.cpp, Line 659
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    20:37:48 #26 CDR -1065 File ThreadedTransferInterface.cpp, Line 1778
    Invalid command

    20:37:48 #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778
    Could not perform start of Disc-at-once

    20:37:48 #28 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5 540 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 20.12.2004 21:37:14 (Prassi/Veritas driver for win 2K)
    File 'Drivers\jraid.sys': Ver=1.10.02.00 built by: WinDDK, size=43264 bytes, created 2.06.2006 14:49:56 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  2. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Hi madis
    Recorder: <TSSTcorp CD/DVDW SH-S182M>Version: SB00
    Update the firmware on the drive. The latest is SB04.

    Disc Manufacturer ID: MBIPG101
    Not the best. Better +RW discs would be Verbatim or Maxell.

    Formatting disc failed
    Do a full erase of the disc. If that fails then something is up with disc itself.

    DiskPeripheral : SATA WDC WD2500 JRAID Port 4 ID 0 DMA: Off
    CdRomPeripheral : TSSTcorpCD/DVDW SH-S182MSB00 JRAID Port 4 ID 1 DMA: Off
    CdRomPeripheral : CH3277P YLU834M 1.0 ayd0izgb Port 5 ID 0 DMA: Off

    You probably fine here - Nero only report DMA correctly when the drives are connected by ide. Check device manager and the controller for these drive to check and make DMA is on.
     
  3. madis

    madis Member

    Joined:
    Jun 10, 2007
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Thank you for your reply, but i haven't found a solution jet.

    I updated firmware.
    DMA is enabled(Tranfer mode: DMA if available) on all drives.

    And drive ejects the disc when i try to Full Erase it.

    Help"

     
  4. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Ok try another disc that hasn't been burned to before.
    If still a no go then switch the media to the ones above.
    Have you tried burning to non RW discs like -R or +R discs? Any problems w/ them?
     
  5. madis

    madis Member

    Joined:
    Jun 10, 2007
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Ok, I bought a Verbatim DVD+R disc and everything works just fine. It seems that my PC has problems writing RW discs. Any idea why?


    But thanks for help anyway.
     
  6. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Could just be that the 2 you've tried aren't compatible w/ the drive.
    Another option is try another burning program and see hoow that goes w/ the rw.
    Here's a good free one - ImgBurn.
    Use the build mode to add the data files or the video_ts folder to burn.
     
  7. madis

    madis Member

    Joined:
    Jun 10, 2007
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    I installed ImgBurn, built a a iso file and when i hit the burn button i got a message "The disc needs to be formatted before use...."
    I selected YES, but recived an error message "Failed to Erase Disc - Invalid Command Operation Code-Operation Failed! - Duration: 00:00:00"
     
  8. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Has this disc ever been burned too? Sounds like it has - that's why Nero & ImgBurn are trying to format then when that fails they try to erase the disc.
    have you tried one or a different brand that hasn't been burned to?
     
  9. madis

    madis Member

    Joined:
    Jun 10, 2007
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    No, the disc hasn't been burned to.
     
  10. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Ok - I'm at a loss on why this burner isn't liking the RW media.
    You still might want to try another brand besides Platinum Plus or Phillips - try Verbatim or Maxell.
     
  11. Sabben

    Sabben Member

    Joined:
    Jul 25, 2007
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    Hello,
    This is a firmware related problem. Your DVD writer is not used to newer type of DVDs. I have just solved this problem by doing this:
    1. I find out exactly what kind of DVD writer I have.
    2. I went to their site and downloaded the correct firmware, and the instruction.
    3. I followed the instruction provided.
    4. After flashing the firmware everything started to work even better than before.
    Good Luck!
    Shahab
     

Share This Page