1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

DVD Burn Errors SCSI_ERR and / or KEY_HARDWARE_ERROR

Discussion in 'DVD±R for advanced users' started by arkraider, Jun 16, 2004.

  1. arkraider

    arkraider Guest

    I have an IOMEGA DVDRW4224INQ-D and a
    DVD-ROM LTD-16X5H. I am using Windows XP, AMD 2800, 512mb RAM with a WD 120gig SATA hard drive with an 8meg cache. I was using a Pentium III 866 with 389 meg RAM, a 40 gig hard drive, the same burner and ROM, same operating system and am still having the same errors as you can see below.
    [bold]With Nero[/bold]
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:program FilesAheadNeroWnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 8:18:06 PM
    Nero API version: 6.3.1.15
    Using interface version: 6.0.0.0
    Installed in: C:program FilesAheadNero
    Application: aheadNero - Burning Rom
    Recorder: <IOMEGA DVDRW4224INQ-D> Version: A110 - HA 1 TA 0 - 6.3.1.15
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    CdRomPeripheral : IOMEGA DVDRW4224INQ-D atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : DVD-ROM LTD-16X5H atapi Port 1 ID 1 DMA: On
    DiskPeripheral : WDC WD1200JD-00GBB0 02.0 si3112 Port 2 ID 0 DMA: Off
    DiskPeripheral : ST340016A 3.75 iteraid Port 3 ID 0 DMA: Off

    === CDRom-Device-Map ===
    IOMEGA DVDRW4224INQ-D D: CDRom0
    DVD-ROM LTD-16X5H E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 191MB (195992kB)
    Memory in use : 62 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    14.6.2004
    NeroAPI
    12:33:10 PM #1 Phase 111 File APIProgress.cpp, Line 273
    DVD-Video files sorted

    12:33:11 PM #2 Text 0 File Reader.cpp, Line 118
    Reader running

    12:33:11 PM #3 Text 0 File AudioCompilationImpl.cpp, Line 817
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    12:33:11 PM #4 Text 0 File Writer.cpp, Line 124
    Writer IOMEGA DVDRW4224INQ-D running

    12:33:11 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    12:33:11 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    12:33:11 PM #7 Text 0 File Burncd.cpp, Line 3167
    Turn on Disc-At-Once, using DVD media

    12:33:11 PM #8 Text 0 File DlgWaitCD.cpp, Line 245
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286095 (508:01.20, 4465MB)

    12:33:11 PM #9 Text 0 File DlgWaitCD.cpp, Line 257
    Write in overburning mode: NO

    12:33:11 PM #10 Text 0 File DlgWaitCD.cpp, Line 2137
    Recorder: IOMEGA DVDRW4224INQ-D, Media type: DVD-R
    Disc Manufacturer: PRINCO -
    Disc Application Code: 64, Disc Physical Code: 193

    12:33:11 PM #11 Text 0 File DlgWaitCD.cpp, Line 418
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    12:33:11 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286096 (2286096) = #2286096/508:1.21
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286096 blocks [IOMEGA DVDRW4224INQ-D ]
    --------------------------------------------------------------

    12:33:11 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 983
    Prepare recorder [IOMEGA DVDRW4224INQ-D ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681924608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2286096 | lead-out | 1 | 0x00 | 0x41

    12:33:11 PM #14 Phase 24 File APIProgress.cpp, Line 273
    Caching of files started

    12:33:11 PM #15 Text 0 File Burncd.cpp, Line 4177
    Cache writing successful.

    12:33:11 PM #16 Phase 25 File APIProgress.cpp, Line 273
    Caching of files completed

    12:33:11 PM #17 Phase 36 File APIProgress.cpp, Line 273
    Burn process started at 2x (2,770 KB/s)

    12:33:11 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2343
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:33:11 PM #19 Text 0 File DVDR.cpp, Line 1840
    Recording mode: Sequential Recording Mode for Multisession

    12:33:11 PM #20 Text 0 File Mmc.cpp, Line 20239
    Set BUFE: supported -> ON

    12:33:11 PM #21 Text 0 File DVDR.cpp, Line 1981
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    12:33:11 PM #22 Text 0 File Cdrdrv.cpp, Line 8120
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    12:56:54 PM #23 SCSI -1039 File Cdrdrv.cpp, Line 1442
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00CF0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x09
    Sense Qual: 0x01
    CDB Data: 0x2A 0x00 0x00 0x1D 0x39 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
    0x32 0x34 0x04 0x0C 0x09 0x01

    12:56:54 PM #24 CDR -1039 File Writer.cpp, Line 304
    Focus or tracking error

    12:56:54 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    12:56:54 PM #26 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    12:56:55 PM #27 Text 0 File DVDR.cpp, Line 2215
    EndDAO: Last written address was 1915359

    12:56:59 PM #28 Phase 133 File APIProgress.cpp, Line 273
    Writing short lead-out

    12:57:10 PM #29 SCSI -1093 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
    0x30 0x3C 0x00 0x0C 0x02 0x00

    12:57:10 PM #30 SCSI -1176 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x04
    CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
    0x5B 0x01 0x00 0x0C 0x72 0x04

    12:57:10 PM #31 CDR -1093 File WriterStatus.cpp, Line 164
    No seek complete
    IOMEGA DVDRW4224INQ-DH1 T0

    12:57:10 PM #32 TRANSFER -24 File WriterStatus.cpp, Line 164
    Could not perform end of Disc-at-once

    12:57:10 PM #33 Phase 38 File APIProgress.cpp, Line 273
    Burn process failed at 2x (2,770 KB/s)

    12:57:10 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 828
    DRM: DRM burn session terminated.

    12:57:10 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 857
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'DriversASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 7:06:00 PM
    File 'DriversInCDfs.SYS': Ver=4, 2, 9, 1, size=90880 bytes, created 24/05/2004 1:57:34 PM (InCD4 driver for win NT/2K/XP)
    File 'DriversInCDpass.SYS': Ver=4, 2, 9, 1, size=25600 bytes, created 24/05/2004 1:57:52 PM (InCD4 driver for win NT/2K/XP)
    File 'DriversInCDrec.SYS': Ver=4, 2, 9, 1, size=5760 bytes, created 24/05/2004 1:59:24 PM (InCD4 driver for win NT/2K/XP)

    Registry Keys:
    HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogonAllocateCDROMs : 0 (Security Option)



    [bold]Name Of the following program = Img Tool Burn 1.1.1[/bold]

    Can't open INI file (C:program FilesImgTool BurnImgTool.ini),
    using default settings...
    Opening NeroAPI.DLL
    Nero API version 6.3.1.15
    Initialization of the NeroAPI successful.
    Found the following devices:
    IOMEGA DVDRW4224INQ-D
    Image Recorder
    =========================================
    Starting Burn Process...
    =========================================
    Using Device"IOMEGA DVDRW4224INQ-D "
    Using ISO Flags: ISO UDF Realloc
    ==============================
    try to building DVD ISO Tree...
    ==============================
    Start path: "C:Burning File Temp"
    AUDIO_TS dir is not present, try to create one...
    VIDEO_TS dir is not present, try to create one...
    ==============================
    building VIDEO_TS Tree...
    ==============================
    Adding VIDEO_TS.IFO
    Adding VIDEO_TS.VOB
    Adding VIDEO_TS.BUP
    Adding VTS_01_0.IFO
    Adding VTS_01_0.VOB
    Adding VTS_01_1.VOB
    Adding VTS_01_2.VOB
    Adding VTS_01_3.VOB
    Adding VTS_01_0.BUP
    Adding VTS_02_0.IFO
    Adding VTS_02_0.VOB
    Adding VTS_02_1.VOB
    Adding VTS_02_0.BUP
    Adding VTS_03_0.IFO
    Adding VTS_03_0.VOB
    Adding VTS_03_1.VOB
    Adding VTS_03_0.BUP
    Writing on DVD Media...
    Using Speed: 2.4x (3324kB/s)
    ===> DVD-Video files reallocation started
    ===> DVD-Video files reallocation completed (no file modified)
    ===> DVD-Video files sorted
    => Reading directories
    => Creating directories
    => Finishing
    => Reading directories
    => Creating directories
    => Checking discs
    ===> Can only write at 2x (2,770 KB/s) instead of 2.4x (3,324 KB/s) to current disc.
    => Writing to cache
    ===> Caching of files started
    ===> Caching of files completed
    => Writing to disc
    ===> Burn process started at 2x (2,770 KB/s)
    => Writing Lead-in
    => Writing tracks
    ===> Focus or tracking error
    ===> Writing short lead-out
    ===> No seek complete
    IOMEGA DVDRW4224INQ-DH1 T0
    ===> Could not perform end of Disc-at-once
    ===> Burn process failed at 2x (2,770 KB/s)
    1A23-0055-3030-1833-4027-0229

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:program FilesAheadNeroWnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 8:18:06 PM
    Nero API version: 6.3.1.15
    Using interface version: 6.0.0.0
    Installed in: C:program FilesAheadNero
    Application: aheadNero - Burning Rom
    Recorder: <IOMEGA DVDRW4224INQ-D> Version: A110 - HA 1 TA 0 - 6.3.1.15
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    CdRomPeripheral : IOMEGA DVDRW4224INQ-D atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : DVD-ROM LTD-16X5H atapi Port 1 ID 1 DMA: On
    DiskPeripheral : WDC WD1200JD-00GBB0 02.0 si3112 Port 2 ID 0 DMA: Off
    DiskPeripheral : ST340016A 3.75 iteraid Port 3 ID 0 DMA: Off

    === CDRom-Device-Map ===
    IOMEGA DVDRW4224INQ-D D: CDRom0
    DVD-ROM LTD-16X5H E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 180MB (184984kB)
    Memory in use : 64 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    14.6.2004
    NeroAPI
    9:36:51 PM #1 Phase 112 File APIProgress.cpp, Line 273
    DVD-Video files reallocation started

    9:36:51 PM #2 Phase 114 File APIProgress.cpp, Line 273
    DVD-Video files reallocation completed (no file modified)

    9:36:51 PM #3 Phase 111 File APIProgress.cpp, Line 273
    DVD-Video files sorted

    9:36:51 PM #4 Text 0 File Reader.cpp, Line 118
    Reader running

    9:36:51 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    9:36:51 PM #6 Text 0 File Writer.cpp, Line 124
    Writer IOMEGA DVDRW4224INQ-D running

    9:36:51 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    9:36:51 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    9:36:51 PM #9 Text 0 File Burncd.cpp, Line 3167
    Turn on Disc-At-Once, using DVD media

    9:36:51 PM #10 Text 0 File DlgWaitCD.cpp, Line 245
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286095 (508:01.20, 4465MB)

    9:36:51 PM #11 Text 0 File DlgWaitCD.cpp, Line 257
    Write in overburning mode: NO

    9:36:51 PM #12 Text 0 File DlgWaitCD.cpp, Line 2137
    Recorder: IOMEGA DVDRW4224INQ-D, Media type: DVD-R
    Disc Manufacturer: PRINCO -
    Disc Application Code: 64, Disc Physical Code: 193

    9:36:51 PM #13 Text 0 File DlgWaitCD.cpp, Line 418
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:36:51 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286096 (2286096) = #2286096/508:1.21
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286096 blocks [IOMEGA DVDRW4224INQ-D ]
    --------------------------------------------------------------

    9:36:51 PM #15 Text 0 File Burncd.cpp, Line 3891
    Can only write at 2x (2,770 KB/s) instead of 2.4x (3,324 KB/s) to current disc.

    9:36:51 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 983
    Prepare recorder [IOMEGA DVDRW4224INQ-D ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681924608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2286096 | lead-out | 1 | 0x00 | 0x41

    9:36:51 PM #17 Phase 24 File APIProgress.cpp, Line 273
    Caching of files started

    9:36:51 PM #18 Text 0 File Burncd.cpp, Line 4177
    Cache writing successful.

    9:36:51 PM #19 Phase 25 File APIProgress.cpp, Line 273
    Caching of files completed

    9:36:51 PM #20 Phase 36 File APIProgress.cpp, Line 273
    Burn process started at 2x (2,770 KB/s)

    9:36:52 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2343
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    9:36:52 PM #22 Text 0 File DVDR.cpp, Line 1840
    Recording mode: Sequential Recording Mode for Multisession

    9:36:52 PM #23 Text 0 File Mmc.cpp, Line 20239
    Set BUFE: supported -> ON

    9:36:52 PM #24 Text 0 File DVDR.cpp, Line 1981
    Start write address at LBA 0
    DVD high compatibility mode: No

    9:36:52 PM #25 Text 0 File Cdrdrv.cpp, Line 8120
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    10:00:33 PM #26 SCSI -1039 File Cdrdrv.cpp, Line 1442
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02190000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x09
    Sense Qual: 0x01
    CDB Data: 0x2A 0x00 0x00 0x1D 0x3B 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
    0x32 0x34 0x04 0x0C 0x09 0x01

    10:00:33 PM #27 CDR -1039 File Writer.cpp, Line 304
    Focus or tracking error

    10:00:33 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    10:00:33 PM #29 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    10:00:33 PM #30 Text 0 File DVDR.cpp, Line 2215
    EndDAO: Last written address was 1915647

    10:00:38 PM #31 Phase 133 File APIProgress.cpp, Line 273
    Writing short lead-out

    10:00:49 PM #32 SCSI -1093 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
    0x30 0x3C 0x00 0x0C 0x02 0x00

    10:00:49 PM #33 SCSI -1176 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x04
    CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
    0x5B 0x01 0x00 0x0C 0x72 0x04

    10:00:49 PM #34 CDR -1093 File WriterStatus.cpp, Line 164
    No seek complete
    IOMEGA DVDRW4224INQ-DH1 T0

    10:00:49 PM #35 TRANSFER -24 File WriterStatus.cpp, Line 164
    Could not perform end of Disc-at-once

    10:00:49 PM #36 Phase 38 File APIProgress.cpp, Line 273
    Burn process failed at 2x (2,770 KB/s)

    10:00:49 PM #37 Text 0 File AudioCompilationImpl.cpp, Line 828
    DRM: DRM burn session terminated.

    10:00:49 PM #38 Text 0 File AudioCompilationImpl.cpp, Line 857
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'DriversASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 7:06:00 PM
    File 'DriversInCDfs.SYS': Ver=4, 2, 9, 1, size=90880 bytes, created 24/05/2004 1:57:34 PM (InCD4 driver for win NT/2K/XP)
    File 'DriversInCDpass.SYS': Ver=4, 2, 9, 1, size=25600 bytes, created 24/05/2004 1:57:52 PM (InCD4 driver for win NT/2K/XP)
    File 'DriversInCDrec.SYS': Ver=4, 2, 9, 1, size=5760 bytes, created 24/05/2004 1:59:24 PM (InCD4 driver for win NT/2K/XP)

    Registry Keys:
    HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogonAllocateCDROMs : 0 (Security Option)

    Error: Burn failed.

    If anything the only thing I have changed so far beside the computer is the newer version of NERO. I have tried Alohol 120%, Clone DVD, DVD Decrypter (Works beutifully decrypting but still errors on burn), DVD Shrink , DVD Fab an older and current version of Nero. I have updated my firmware on the DVD burner, I am yet to find out what my DVD Rom acually is in order to upgrade the frimware. I have viewed and checked and double checked forums all over and still have not seen a fixable solution to this extremely frustrating problem I seem to be having. I am desperately hoping someone can help me with this before I do something drastic....!!!!!!
     
  2. 321sucker

    321sucker Regular member

    Joined:
    Mar 14, 2004
    Messages:
    380
    Likes Received:
    0
    Trophy Points:
    26
    Try this:

    Here is the link to the ASPI utility for WIN XP which also has the ASPI chk tool within it.
    http://adaptec.com/worldwide/suppor...em/Microsoft+Windows+XP&filekey=aspi_v471.exe

    Copy and paste these instructions to notepad and print them, since you'll have to reboot to complete the installation.

    In advance, I aplogize if my instructions seem elementary, not all are pc savvy.

    First click on the link above and download the file to the default location which will be the root of the local disk. Here is the path, depending on your drive letter, may be "c" or "d". If it is local disk d then replace the c with the d.

    C:\adaptec\aspi or D:\adaptec\aspi

    Now go to windows explorer, by right clicking the windows start button and left clicking explore.

    Look for the adaptec folder

    Double Click on the adaptec folder, and to the right, in the split window, you'll see the aspi folder, now double click it. Now you will see a multitude of files.

    Look for the "aspiinst" icon and double click it. Follow the instructions.

    DOnt worry that it doesn't mention anything about ASPI for WIN XP, its OK.. DONT WORRY it will work.. 4 SHO..

    Once rebooted go back to the aspi folder and look for the "aspichk" icon, this is the ASPI check.

    Here are the instructions to get to the folder
    Double Click on the adaptec folder, you'll see the aspi folder, now double click it.

    At the bottom in very light letters you will either see ASPI is installed and fully operational, which is what you want or ASPI error or ASPI is not functional or.. you get the point.
    At any regard, you'll want the ASPI to be installed and fully operational.
    GOOD LUCK & hope this helps..... 321sucker
     
  3. Veblin

    Veblin Active member

    Joined:
    Feb 27, 2003
    Messages:
    1,241
    Likes Received:
    0
    Trophy Points:
    66
    I would think that DMA should be on for hard disk drives.

    InCD is known to cause DVD burning problems on many systems. Try uninstalling InCD.
     
  4. arkraider

    arkraider Guest

    Thanks Veblin, I have already tried removing INCD and was not overly excited by the result...lol... I am interested with the change of DMA changing to on, however I ave not been succesful tonight to change the paramater.. can you tell me where and how by chance... Thanks all for your help....
     
  5. Veblin

    Veblin Active member

    Joined:
    Feb 27, 2003
    Messages:
    1,241
    Likes Received:
    0
    Trophy Points:
    66
  6. arkraider

    arkraider Guest

    Thanks for the help so far guys.... keep it coming.. I have removed INCD software and removed AnyDVD also. Nothing happening still. I have contacted Iomega support they said try with out any other software running in start up through MSCONFIG. Did that also... Failed again. I am currently trying different DVD media. My next step will be to uninstall all burning software and then only install one at a time, remove it if it doesn't work and install another and keep going to see if one works... Has anyone else got any other ideas so far for me. I tried DMA switching also, but that has not made the difference I was hoping for unfortunately. PC's fault no one elses, thanks heaps for the assistance so far guys...
     
  7. 321sucker

    321sucker Regular member

    Joined:
    Mar 14, 2004
    Messages:
    380
    Likes Received:
    0
    Trophy Points:
    26
    Good eye but it has nothing to do with the burn error that arkraider is having, it will effect the burn / rip speed.

    Tru, InCD can cause conflicts with other burning software but if you are using nero to burn, InCD wont effect your burning, being it is part of the Nero suite. I dont think Nero would add a software that conflicts with itself.


    I currently have Nero ultimate edition without InCD due to Xcopy conflict,Xcopy Platinum,DVD Decyptor, Shrink, Adobe Encore DVD, and several others and have no problems ripping or burning.
    I use Ridata G04 silver matte 4x media

    Be certain you have all Windows updates and SP's
    Have you updated the ASPI on the pc?
     
    Last edited: Jun 18, 2004
  8. arkraider

    arkraider Guest

    321.... Thanks for the info so far... I don't know enough about "aspi" to know what it is let alone updateing it or any destructive qualities it may have if something goes wrong with the update... Can you offer advice on how to update and what it does... Thanks...
     
  9. 321sucker

    321sucker Regular member

    Joined:
    Mar 14, 2004
    Messages:
    380
    Likes Received:
    0
    Trophy Points:
    26
    Did you totally ignore my first post to this thread, wow Im crushed. sniff,sniff.
    Full instructions are there.

    And, ASPI ius the communications layer between the OS and the burner, if this is corrupted, bad burns or rips.
     
    Last edited: Jun 18, 2004
  10. arkraider

    arkraider Guest

    321.... No... No ignoring here... I went and looked for those files. Anything with adaptec in the description and found nothing.... even did my own search for it (without Windows so called assistance) and still didn't find anything with the mention of adaptec or aspi....nothing in my C, F, G, or H drive for adaptec....
     
  11. arkraider

    arkraider Guest

    downloaded aspi layer, followed all instruction to the letter and tried burning again this morning... Error.... nothing wrong with aspi all fine... but still got error... will try again and again..also tried other media called "Ever Media" from Nan Ya Optical. problem was drive could not focus or something like that for error... still looking for hope to be again able to burn when ever I like instead of when the pc decides it would like to burn!!!!!
     
  12. arkraider

    arkraider Guest

    Just looked inside pc case and have noticed on my Gigabyte GA-7N400 Pro2 mother board there are 4 IDE slots and my IDE hard drive is plugged into IDE slot 3 and my burner and ROM are plugged into IDE slot 2 The other drive is SATA so that is ok in another slot. But shouldn't the IDE drives be in Slot 1 and two and then any other addon go to remaining. Shouldn't something be at least plugged into slot 1???
     
  13. Nephilim

    Nephilim Moderator Staff Member

    Joined:
    Feb 13, 2003
    Messages:
    14,942
    Likes Received:
    0
    Trophy Points:
    116
    The SCSI error is a most compelling reason to still look at the ASPI.

    4.71 is the least stable and compatible version of the bunch. Most give ver. 4.60 the highest marks although ver. 4.71.2 is a very good performer (I've had the best results with 4.71.2 myself).

    It may do some good to download ForceASPI 1.7. Once extracted to a folder there are a couple steps to take.

    1) Look for a batch file called KILLASPI. Run it then reboot. This will wipe your ASPI completely and give you a clean slate to start from.

    2) Now look for a batch file called INSTASPI. Run it then reboot. This will install ver. 4.60 on your system.

    Once this is done you can use ASPICHK to verify your install. All four entries should read ver. 4.60. Here's a link to ASPICHK if you don't have it already:

    http://www.adaptec.com/worldwide/su...oduct/EZ-SCSI_5.0&filekey=aspichk.exe&sess=no
     
  14. Nephilim

    Nephilim Moderator Staff Member

    Joined:
    Feb 13, 2003
    Messages:
    14,942
    Likes Received:
    0
    Trophy Points:
    116
    By "4 IDE slots" you're referring to the number of connectors on the cables, correct?

    Most motherboards (there are exceptions) have 2 IDE ports with one being the Primary and the other being the Secondary. I believe Gigabyte color codes theirs.

    It would help to know which drives are on the very end connector of each cable (Master) and which drives are on the middle connector of the cable (Slave).

    Hard drives are best on the Primary channel and set to master and the burner would be best on the Secondary channel set to Master. The ROM would be fine set to Slave on either channel. Of course the proper jumper settings are required too :)
    _X_X_X_X_X_[small][​IMG]
    JMLS-166S/Plextor PX-708A/Plextor Premium

    My Movies! http://www.intervocative.com/dvdcollection.aspx/Rephaim[/small]
     
    Last edited: Jun 18, 2004
  15. arkraider

    arkraider Guest

    Nephilim, Thanks for the advice, I have done all the Chk, Kill and isntall Aspi things as mentioned. Was running ver 6 on pc anyway, when I checked it before doing anything else.Tried again with and with out. A mate asked if I had the windows SP.1 on PC, I said no.... I have now and am having a little more luck but still crashing the burn with the same error. Not quite as frequent though.
    I am still trying to burn and also I am unable to get over 2x speed no matter what software, type of DVD + or - R doesn't seem to care.
    Also regarding IDE slots, I am referring to slots on Motherboard. There are 4 slots. My DVD drives are running as they should be on the cable and set up slave / master correct. My 40 gig hard drive is in Slot 3 on MB and DVD drives are on slot 2 on MB. Shouldn't really make a difference I gues seeing as I am ripping to my SATA drive I suppose. But I thought I should ask the question anyway.
     
    Last edited by a moderator: Jun 22, 2004
  16. arkraider

    arkraider Guest

    Just rying to Use DVD decrypter and this is the following error I received at 84% complete.
    I/O Error
    Device: [1:0:0]IOMEGA DVDRW 4224INQ-D A110(D:)

    Scsi Status: 0x02
    Interpretation: Check Condition
    CDB: 2A 00 00 1D 58 20 00 00 10 00
    Interpretaion: Write(10)- Sectors:1923104-1923119

    Sense Area: 70 00 04 00 00 00 00 10 32 34 04 0C 09 01 00 00 00 00 00 01 00 00 00 00
    Interpretation: Tracking Servo Failure
    Retry OR Cancel

    Upon pressing retry I get the following.
    I/O Error
    Device: [1:0:0]IOMEGA DVDRW 4224INQ-D A110(D:)

    Scsi Status: 0x02
    Interpretation: Check Condition
    CDB: 2A 00 00 1D 58 20 00 00 10 00
    Interpretaion: Write(10)- Sectors:1923104-1923119
    Sense Area: 70 00 05 00 00 00 00 10 2A 00 00 0C 30 05 00 00 00 00 00 00 00 00 00 00
    Interpretation: Cannot Write Medium - Incompatable Format

    Tracking Servo... I think my burner has issues.... I may need to try another burner perhaps... Any ideas other than the one never buy Iomega Burners.....
     
  17. Nephilim

    Nephilim Moderator Staff Member

    Joined:
    Feb 13, 2003
    Messages:
    14,942
    Likes Received:
    0
    Trophy Points:
    116
    You got it - it's a bum drive.


    LOL, good one! Plextor and Pioneer are about as good as it gets but with the Pioneer 107 going for $90 now it's a no-brainer as to which is the best deal :)
    _X_X_X_X_X_[small][​IMG]
    JMLS-166S/Plextor PX-708A/Plextor Premium

    My Movies! http://www.intervocative.com/dvdcollection.aspx/Rephaim[/small]
     
    Last edited: Jun 22, 2004
  18. 321sucker

    321sucker Regular member

    Joined:
    Mar 14, 2004
    Messages:
    380
    Likes Received:
    0
    Trophy Points:
    26
    Most DVD writers have a 2x limitation on ripping, but liteon drives dont. With other burners, you'll need an addition DVD-reader to rip any faster, but not with lite-on dirves, one drive does it all.
    Try NewEgg

    the 851s goes for around 80 bucks, its a no brainer, pal.
     
  19. arkraider

    arkraider Guest

    Well boys and girls... it is official.... I can now bag the crap out of Iomega hardware... Do not... I repeat.... Do not buy Iomega Super DVD burner... It is only a waist of your hard earned money.. If you feel you must waist it.. Then I will gladly accept all donations my way...I have now tried it not only with multiple types of disks and software... but also on three different PC's..... all come up with nearly all the same error essages.... regardles... does not burn video to DVD format of any type.... Not in Australia anyway.......I do have one piece of advice for all who burn... and that is make sure you have you Service Pack installed for Windows XP if you expect them to work....
    Also can anyone tell me about this DVD (NEC DVD_RW ND-2500A)writer and whether it is a good buy for $100.00 AUSD????
     
  20. 321sucker

    321sucker Regular member

    Joined:
    Mar 14, 2004
    Messages:
    380
    Likes Received:
    0
    Trophy Points:
    26
    I have an NEC 2500a as well as the Liteon 451s flashed to 851s.
    I've updated the NEC's firmaware to ver 1.07 and it rips and burns flawlesslt using Ridata G04 -R media.
    I've heard that NEC's and -R dont agree, but contrar, tis not true.

    My liteon is great as well. If I had to choose I'd take the liteon, its a bit noisy, but a great ripper and can burn most 4x media at 8x on the +R side.
     

Share This Page