home 4C82-0010-8011-0000-3140-9596-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.7.5.1 Internal Version: 7, 7, 5, 1 (Nero Express) Recorder: <HP DVD Writer 420n> Version: 1.33 - HA 1 TA 2 - 7.7.5.1 Adapter driver: <USB 2.0> HA 1 Drive buffer : 2048kB Bus Type : set to ATAPI (3) -> ATAPI, detected: ? CD-ROM: <TOSHIBA CDW/DVD SD-R1612>Version: TB02 - HA 1 TA 0 - 7.7.5.1 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y060P0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6L300R0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : TOSHIBA CDW/DVD SD-R1612 atapi Port 1 ID 0 DMA: On CdRomPeripheral : TE3642C VEA811D 1.0 dtscsi Port 2 ID 0 DMA: Off === CDRom-Device-Map === TOSHIBA CDW/DVD SD-R1612 D: CDRom0 HP DVD Writer 420n F: CDRom2 TE3642C VEA811D G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 371MB (380024kB) Memory in use : 63 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 29.1.2007 DVD-Copy on the fly 10:58:53 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 10:58:53 PM #2 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 10:58:54 PM #3 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:58:54 PM #4 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xBB 00 FF FF FF FF 00 00 00 00 00 00 Sense Area: 0xF0 00 05 00 00 00 00 0A 00 00 00 00 24 10:58:54 PM #5 Text 0 File DVDCopy.cpp, Line 319 DVD Track-Information from source disc: Media Type: DVD-R S01 T01 Con 0x14 Start 0 Len 2080399 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 10:58:54 PM #6 Text 0 File DVDCopy.cpp, Line 434 Max -1 tracks of 1 allowed to copy 1: 0 - 2080399 = 2080399, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 10:58:54 PM #7 Text 0 File Burncd.cpp, Line 3465 Turn on Disc-At-Once, using DVD media 10:58:54 PM #8 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2080398 (462:18.48, 4063MB) 10:58:54 PM #9 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 10:58:54 PM #10 Text 0 File DlgWaitCD.cpp, Line 2912 Recorder: HP DVD Writer 420n, Media type: DVD-R Disc Manufacturer: MJC M0 - 05 Disc Application Code: 64, Disc Physical Code: 193 10:58:54 PM #11 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:58:54 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 823 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2080399 (2080399) = #2080399/462:18.49 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2080399 blocks [F: HP DVD Writer 420n] -------------------------------------------------------------- 10:58:54 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1026 Prepare [F: HP DVD Writer 420n] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4260657152, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2080399 | 2080399 | 0x00 0 | 1 | 1 | 0x41 | 2080399 | 2080399 | 0x00 2080399 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 10:58:54 PM #14 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:58:54 PM #15 Phase 36 File dlgbrnst.cpp, Line 1760 Burn process started at 2x (2,770 KB/s) 10:58:55 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2764 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:58:55 PM #17 Text 0 File DVDR.cpp, Line 3070 Recording mode: Sequential Recording Mode 10:58:55 PM #18 Text 0 File DVDR.cpp, Line 3226 Start write address at LBA 0 DVD high compatibility mode: Yes 10:58:55 PM #19 Text 0 File Cdrdrv.cpp, Line 9288 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:58:55 PM #20 SPTI -1046 File SCSIPassThrough.cpp, Line 179 CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x11 CDB Data: 0x53 00 00 00 00 00 1F BE 90 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 11 10:58:55 PM #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1785 Illegal disc F: HP DVD Writer 420n 10:58:55 PM #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1785 Could not perform start of Disc-at-once 10:58:55 PM #23 Phase 38 File dlgbrnst.cpp, Line 1760 Burn process failed at 2x (2,770 KB/s) 10:58:55 PM #24 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:58:55 PM #25 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 10:58:55 PM #26 Text 0 File Cdrdrv.cpp, Line 10529 DriveLocker: UnLockVolume completed 10:58:55 PM #27 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:58:58 PM #28 Text 0 File Cdrdrv.cpp, Line 10529 DriveLocker: UnLockVolume completed 10:58:58 PM #29 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) I dunno what to do. Everytime I try backing up a DVD in Nero I ALWAYS get this error. And everytime I try using Alcohol 120 it keeps getting all these disk errors. -Thanks
1....You are burning on the fly..... not recommended..... 2.....shut down some of your programs that you don't need while burning, no internet, no multi tasking.... too much memory being used 3......your media is not even listed so I must presume that you are using crappy media...... MJC is a code I don't even see anywhere... use better media like Taiyo Yuden, Sony, Maxell.....made in Japan media... or Verbatim.... top of the line media so you'll have a better chance of success. 4......burning your media too slowly is just as bad as burning too fast! I recommend burning at 4x up to 8x depending on the rated speed of the media being used. Keep in mind that your burner's last firmware update is 2 yrs old now.... I recommend using 8x media and burning at 4x! 5......also your version of Nero might be buggy.... but for copying a DVD it should have worked! I use Nero 6.6.0.18 the best version of Nero 6 and I don't know what is good for version 7 anymore because Nero updates like changing your underware so I can't really recommend a stable version on Nero 7. try using the adjustments 1-4 that I recommend to do and see if you have better results. one more thing...... I hope you're not trying to back up a store bought DVD through Nero alone.... you will need a program like AnyDVd or some other program to break the encryptions that prevent copying. If you are just backing up a copy of a copy or backing up data or backing up home made movies then Nero should have done the job! but as far as copying a store bought DVD movie.... there are plenty of programs out there that can break the encryptions on a DVD and then you can use Nero to burn! I recommend a free program called RipIt4Me, just download the programs and follow the guide: http://www.ripit4me.org/guide.html#start
Hi xHybridx, I am using nero from the years of CD writers born (Writer with 2x/4x max speed). Present stable version, I am using, is Nero7 premium reloaded 7.5.9.0A(file dt 27th Nov 2006). Doing CD, DVD copying, conversion, making movies etc. without any problems.Believe, you can download it from here itself - afterdawn.com Version 7.7.5.1 (dt Jan ? 2007) and 7.8.5.0 (dt 20th Mar 2007) are not working properly for DVD files.
Thanks for the help guys, I decided to just stop using Nero for now and switch to Alcohol 120 since that seems to be alot faster and easier. But yeah..I'll try those ideas you gave me and see if it will do anything to help my situation with Nero in the future. See ya