1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

DVD Burning Problem

Discussion in 'DVD±R media' started by antoniomc, Oct 6, 2004.

  1. antoniomc

    antoniomc Member

    Joined:
    Oct 6, 2004
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    11
    Hi all
    I hope some one of you can help me
    I'm having problems burning DVD's. During the burning process I have no errors, but after that, when the files are verified against the original ones, I have errors. The files are different...
    I have two DVD burners. The same happens with both.

    DVD burners I have: LG GSA-4081B and a Samsung TS-H552B
    The Software I tested: Nero and Roxio and WriteMAster from Pinnacle
    I have only one burning software installed at a time

    What have I done with no results:
    Updated my motherboard bios
    Formatted my PC and installed Windows XP SP2 and made all the updates
    Upgraded the firmware of the drives
    Used the latest drivers to XP
    Tested different brands of blank DVD's
    Tested all kinds of DVD's (+/-R and RAM in the LG)
    Tested different burning software
    Tested in low burning speeds
    Changed the transfer mode from DMA to "PIO Only" of the DVD drives
    Tested the LG GSA-4081B in another PC
    And I bought a gun to shoot my PC (kidding)

    I think that it's very unlikely to be a DVD burner defect, because the same thing happens with both DVD burners, and the same thing happened in the other PC with the LG GSA-4081B

    I'm in a dead end.... HELP!!!

    Thanks
    António
     
  2. Nephilim

    Nephilim Moderator Staff Member

    Joined:
    Feb 13, 2003
    Messages:
    14,942
    Likes Received:
    0
    Trophy Points:
    116
    Can you post a log?
     
  3. DogBomb

    DogBomb Regular member

    Joined:
    Jun 18, 2003
    Messages:
    856
    Likes Received:
    0
    Trophy Points:
    26
    Try burning at the slowest speed. I've had that problem before, and burning at a slower speed usually helps. I have a feeling it's cheap media, but you don't give much in details.
     
  4. antoniomc

    antoniomc Member

    Joined:
    Oct 6, 2004
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    11
    Nephilim, sorry, a Log from the DVD burner software?
    I'm not sure if NERO makes such logs...

    DogBomb as I said, I tryed burning in low speeds, but no better results...
     
  5. Nephilim

    Nephilim Moderator Staff Member

    Joined:
    Feb 13, 2003
    Messages:
    14,942
    Likes Received:
    0
    Trophy Points:
    116
    Nero should automatically save the log whether you choose to or not. This from Ahead's site about where to find the logs:

    If you forgot to save the logfile, there is a NeroHistoryLog in the C:\Program Files\Ahead\Nero (or NeroExpress) directory. It is automatically created by our software and will also help to solve your problem. For Nero Vision Express if there is an error message save the logfile, please name it nerovision.txt and save it to your desktop.
     
  6. antoniomc

    antoniomc Member

    Joined:
    Oct 6, 2004
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    11
    Here is the last part of the Nero History Log File
    The file is a bit long, I can send you the full file via mail, but i do not know your mail address...


    ***************************************
    22:05:33 #17 Text 0 File Cdrdrv.cpp, Line 8230
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: VDSPMSAB
    Media type ID: 001
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 56 44 53 50 4D - 53 41 42 30 30 31 01 38 ...VDSPMSAB001.8
    23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T..............
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    22:05:33 #18 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 20:07,589 (1207589ms) -> OK

    22:05:33 #19 Text 0 File DVDPlusRW.cpp, Line 628
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    22:25:18 #20 Text 0 File WriterStatus.cpp, Line 115
    <TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 1922928 (1D5770h), lenght 0 blocks

    22:25:18 #21 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    22:25:50 #22 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    22:25:50 #23 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    22:25:50 #24 Phase 37 File dlgbrnst.cpp, Line 1855
    Burn process completed successfully at 2.4x (3.324 KB/s)

    22:25:50 #25 Phase 78 File dlgbrnst.cpp, Line 1855
    Data verification started

    22:27:47 #26 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\Adobe Encore DVD\Library Content\Menu Templates\PAL\PAL_Scientific Menu.psd
    Adobe Encore DVD\Library Content\Menu Templates\PAL\PAL_Scientific Menu.psd

    22:32:26 #27 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\Diciopedia 2004\D2004_CD2.B5I
    Diciopedia 2004\D2004_CD2.B5I

    22:32:34 #28 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\Diciopedia 2004\D2004_CD3.B5I
    Diciopedia 2004\D2004_CD3.B5I

    22:37:57 #29 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\Sonic.DVDit.Special.Edition.v2.5-PARADOX\data2.cab
    Sonic.DVDit.Special.Edition.v2.5-PARADOX\data2.cab

    22:38:06 #30 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\SonicReelDVD v3.0.3\Sonic CinePlayer 1.5 Install\Sonic CinePlayer 1.5 Install.exe
    SonicReelDVD v3.0.3\Sonic CinePlayer 1.5 Install\Sonic CinePlayer 1.5 Install.exe

    22:39:39 #31 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\Ulead.dvd.moviefactory.v3.disc.creator-tda\tda-udm3.014
    ULEAD.DVD.MOVIEFACTORY.V3.DISC.CREATOR-TDA\tda-udm3.014

    22:39:48 #32 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\Ulead.dvd.moviefactory.v3.disc.creator-tda\tda-udm3.016
    ULEAD.DVD.MOVIEFACTORY.V3.DISC.CREATOR-TDA\tda-udm3.016

    22:40:32 #33 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\Ulead.dvd.moviefactory.v3.disc.creator-tda\tda-udm3.023
    ULEAD.DVD.MOVIEFACTORY.V3.DISC.CREATOR-TDA\tda-udm3.023

    22:40:34 #34 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\Ulead.dvd.moviefactory.v3.disc.creator-tda\tda-udm3.024
    ULEAD.DVD.MOVIEFACTORY.V3.DISC.CREATOR-TDA\tda-udm3.024

    22:40:42 #35 VERIFYERR 13 File UDFCompilationImpl.cpp, Line 1385
    Status summary
    Total files=311, identical=302, different=9, inaccessible=0, skipped=0.

    22:40:42 #36 Phase 81 File dlgbrnst.cpp, Line 1855
    Data verification failed


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04-08-2004 2:07:00 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  7. bytor

    bytor Member

    Joined:
    Sep 17, 2004
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    I think is the media that you are using. I had the same problem with that media (VDSPMSAB 001). Nero would burn it fine, but it would give me errors when verifying. Anyway, it did play in my DVD player.

    That is probably the worst media i've ever tried. It will not last long.
     
  8. Nephilim

    Nephilim Moderator Staff Member

    Joined:
    Feb 13, 2003
    Messages:
    14,942
    Likes Received:
    0
    Trophy Points:
    116
    Can you list the brand/type of all the media you've tried?

    Have you updated the firmware to the latest revision for both your drives?

    Are you multitasking while burning?
     
  9. antoniomc

    antoniomc Member

    Joined:
    Oct 6, 2004
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    11
    Yes, the firmware in both drives are updated

    I've tested Verbitin, TDK, Swisstec, Sky, Emtec brands

    The Verbitin and the TDK were the most expencive one...
    Same result
     
  10. Nephilim

    Nephilim Moderator Staff Member

    Joined:
    Feb 13, 2003
    Messages:
    14,942
    Likes Received:
    0
    Trophy Points:
    116
    Hmmm, it would help to have a full log. Don't worry about the length :)
     
  11. antoniomc

    antoniomc Member

    Joined:
    Oct 6, 2004
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    11
    Here is the full log:

    Team ETH0
    serial removed
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22-07-2004 17:33:44
    Nero version: 6.3.1.25
    Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A104 - HA 0 TA 1 - 6.3.1.25
    Adapter driver: <atapi> HA 0
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <HL-DT-ST DVDRAM GSA-4081B>Version: A104 - HA 0 TA 1 - 6.3.1.25
    Adapter driver: <atapi> HA 0

    === Scsi-Device-Map ===
    DiskPeripheral : SAMSUNG SP1203N atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVDRAM GSA-4081 F: CDRom0
    TSSTcorp CD/DVDW TS-H552 G: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 128MB (131588kB)
    Memory in use : 74 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    3.10.2004
    ISO compilation
    18:45:01 #1 Text 0 File Isodoc.cpp, Line 6083
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    18:45:01 #2 Text 0 File Reader.cpp, Line 126
    Reader running

    18:45:01 #3 Text 0 File Writer.cpp, Line 124
    Writer HL-DT-ST DVDRAM GSA-4081B running

    18:45:01 #4 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    18:45:01 #5 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-at-once, using DVD media

    18:45:01 #6 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2236703 (497:02.53, 4368MB)
    Last address to be written: 1922927 (427:19.02, 3755MB)

    18:45:01 #7 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    18:45:01 #8 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: HL-DT-ST DVDRAM GSA-4081B, Media type: DVD-RAM

    18:45:01 #9 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    18:45:01 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1922928 (1922928) = #1922928/427:19.3
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1922928 blocks [HL-DT-ST DVDRAM GSA-4081B]
    --------------------------------------------------------------

    18:45:02 #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3938156544, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1922928 | lead-out | 1 | 0x00 | 0x41

    18:45:02 #12 Phase 24 File dlgbrnst.cpp, Line 1855
    Caching of files started

    18:45:04 #13 Text 0 File Burncd.cpp, Line 4163
    Cache writing successful.

    18:45:04 #14 Phase 25 File dlgbrnst.cpp, Line 1855
    Caching of files completed

    18:45:04 #15 Phase 36 File dlgbrnst.cpp, Line 1855
    Burn process started at 3x (4.155 KB/s)

    18:45:04 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    18:45:04 #17 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 15:57,213 (957213ms) -> OK

    18:45:04 #18 Text 0 File DVDR.cpp, Line 2000
    Recording mode: DVD-RAM Mode

    18:45:04 #19 Text 0 File DVDR.cpp, Line 2141
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    18:45:04 #20 Text 0 File Cdrdrv.cpp, Line 8230
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-RAM (1), Part Version: 6
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
    Linear Density: 0,280-0,291 um/bit, Track Density: 0,615 um/track
    Starting Physical Sector Number of Data Area: 31000 h (DVD-RAM)
    End Physical Sector Number of Data Area: 265F5F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) exist
    Media Specific [16..63]:
    80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    10 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    19:25:12 #21 Text 0 File WriterStatus.cpp, Line 115
    <HL-DT-ST DVDRAM GSA-4081B> start writing Lead-Out at LBA 1922928 (1D5770h), lenght 0 blocks

    19:25:12 #22 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    19:25:12 #23 Text 0 File DVDR.cpp, Line 2383
    EndDAO: Last written address was 1922927

    19:25:12 #24 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    19:25:12 #25 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    19:25:12 #26 Phase 37 File dlgbrnst.cpp, Line 1855
    Burn process completed successfully at 3x (4.155 KB/s)

    19:25:12 #27 Phase 78 File dlgbrnst.cpp, Line 1855
    Data verification started

    19:31:03 #28 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\Diciopedia 2004\D2004_CD2.B5I
    Diciopedia 2004\D2004_CD2.B5I

    19:32:01 #29 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\Diciopedia 2004\D2004_CD3.B5I
    Diciopedia 2004\D2004_CD3.B5I

    19:36:27 #30 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\Sonic.DVDit.Special.Edition.v2.5-PARADOX\data2.cab
    Sonic.DVDit.Special.Edition.v2.5-PARADOX\data2.cab

    19:38:12 #31 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\Ulead.dvd.moviefactory.v3.disc.creator-tda\tda-udm3.019
    ULEAD.DVD.MOVIEFACTORY.V3.DISC.CREATOR-TDA\tda-udm3.019

    19:38:42 #32 VERIFYERR 13 File UDFCompilationImpl.cpp, Line 1385
    Status summary
    Total files=311, identical=307, different=4, inaccessible=0, skipped=0.

    19:38:42 #33 Phase 81 File dlgbrnst.cpp, Line 1855
    Data verification failed


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04-08-2004 2:07:00 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======

    Team ETH0
    serial removed

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22-07-2004 17:33:44
    Nero version: 6.3.1.25
    Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS04 - HA 1 TA 0 - 6.3.1.25
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <HL-DT-ST DVDRAM GSA-4081B>Version: A104 - HA 0 TA 1 - 6.3.1.25
    Adapter driver: <atapi> HA 0

    === Scsi-Device-Map ===
    DiskPeripheral : SAMSUNG SP1203N atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 0 ID 1 DMA: Off
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVDRAM GSA-4081 F: CDRom0
    TSSTcorp CD/DVDW TS-H552 G: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 154MB (158664kB)
    Memory in use : 69 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    5.10.2004
    ISO compilation
    17:28:30 #1 Text 0 File Isodoc.cpp, Line 6083
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    17:28:30 #2 Text 0 File Reader.cpp, Line 126
    Reader running

    17:28:30 #3 Text 0 File Writer.cpp, Line 124
    Writer TSSTcorp CD/DVDW TS-H552B running

    17:28:30 #4 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    17:28:30 #5 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-at-once, using DVD media

    17:28:52 #6 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1922959 (427:19.34, 3755MB)

    17:28:52 #7 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    17:28:52 #8 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
    Disc Manufacturer: VDSPMS - AB 01
    Disc Application Code: 64, Disc Physical Code: 193

    17:28:52 #9 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert the disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD+R9 Double Layer.)

    17:28:52 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1922960 (1922960) = #1922960/427:19.35
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1922960 blocks [TSSTcorp CD/DVDW TS-H552B]
    --------------------------------------------------------------

    17:29:09 #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3938222080, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1922960 | lead-out | 1 | 0x00 | 0x41

    17:29:09 #12 Phase 24 File dlgbrnst.cpp, Line 1855
    Caching of files started

    17:29:10 #13 Text 0 File Burncd.cpp, Line 4163
    Cache writing successful.

    17:29:10 #14 Phase 25 File dlgbrnst.cpp, Line 1855
    Caching of files completed

    17:29:10 #15 Phase 36 File dlgbrnst.cpp, Line 1855
    Burn process started at 2x (2.770 KB/s)

    17:29:10 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    17:29:10 #17 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 23:53,343 (1433343ms) -> OK

    17:29:10 #18 Text 0 File DVDR.cpp, Line 2000
    Recording mode: Sequential Recording Mode

    17:29:10 #19 Text 0 File Mmc.cpp, Line 20660
    Set BUFE: Super Link -> ON

    17:29:10 #20 Text 0 File DVDR.cpp, Line 2141
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    17:29:10 #21 Text 0 File Cdrdrv.cpp, Line 8230
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    17:29:17 #22 Text 0 File Cdrdrv.cpp, Line 1297
    17:29:17.234 - TSSTcorp CD/DVDW TS-H552B\H1 T0 : Queue again later

    17:52:14 #23 SCSI -1135 File Cdrdrv.cpp, Line 1445
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03D80000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x1B 0x72 0x80 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    17:52:14 #24 CDR -1135 File Writer.cpp, Line 304
    Write error

    17:52:14 #25 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    17:52:14 #26 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    17:52:15 #27 Text 0 File DVDR.cpp, Line 2383
    EndDAO: Last written address was 1798783

    17:52:18 #28 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    17:52:18 #29 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    17:52:18 #30 Phase 38 File dlgbrnst.cpp, Line 1855
    Burn process failed at 2x (2.770 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04-08-2004 2:07:00 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======

    Team ETH0
    serial removed

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22-07-2004 17:33:44
    Nero version: 6.3.1.25
    Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS04 - HA 1 TA 0 - 6.3.1.25
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <HL-DT-ST DVDRAM GSA-4081B>Version: A104 - HA 0 TA 1 - 6.3.1.25
    Adapter driver: <atapi> HA 0

    === Scsi-Device-Map ===
    DiskPeripheral : SAMSUNG SP1203N atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 0 ID 1 DMA: Off
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVDRAM GSA-4081 F: CDRom0
    TSSTcorp CD/DVDW TS-H552 G: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 114MB (117188kB)
    Memory in use : 77 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    5.10.2004
    ISO compilation
    17:55:58 #1 Text 0 File Isodoc.cpp, Line 6083
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    17:55:58 #2 Text 0 File Reader.cpp, Line 126
    Reader running

    17:55:58 #3 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    17:55:58 #4 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-at-once, using DVD media

    17:55:58 #5 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1922959 (427:19.34, 3755MB)

    17:55:58 #6 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    17:55:58 #7 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
    Disc Manufacturer: VDSPMS - AB 01
    Disc Application Code: 64, Disc Physical Code: 193

    17:55:58 #8 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    17:55:58 #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1922960 (1922960) = #1922960/427:19.35
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1922960 blocks [TSSTcorp CD/DVDW TS-H552B]
    --------------------------------------------------------------


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04-08-2004 2:07:00 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======

    Team ETH0
    serial removed

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22-07-2004 17:33:44
    Nero version: 6.3.1.25
    Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS04 - HA 1 TA 0 - 6.3.1.25
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <HL-DT-ST DVDRAM GSA-4081B>Version: A104 - HA 0 TA 1 - 6.3.1.25
    Adapter driver: <atapi> HA 0

    === Scsi-Device-Map ===
    DiskPeripheral : SAMSUNG SP1203N atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 0 ID 1 DMA: Off
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVDRAM GSA-4081 F: CDRom0
    TSSTcorp CD/DVDW TS-H552 G: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 14MB (14476kB)
    Memory in use : 97 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    5.10.2004
    ISO compilation
    17:56:28 #1 Text 0 File Isodoc.cpp, Line 6083
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    17:56:28 #2 Text 0 File Reader.cpp, Line 126
    Reader running

    17:56:28 #3 Text 0 File Writer.cpp, Line 124
    Writer TSSTcorp CD/DVDW TS-H552B running

    17:56:28 #4 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    17:56:29 #5 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-at-once, using DVD media

    17:56:47 #6 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1922927 (427:19.02, 3755MB)

    17:56:47 #7 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    17:56:48 #8 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
    Disc Manufacturer: VDSPMS - AB 01
    Disc Application Code: 64, Disc Physical Code: 193

    17:56:48 #9 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD+R9 Double Layer.)

    17:56:48 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1922928 (1922928) = #1922928/427:19.3
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1922928 blocks [TSSTcorp CD/DVDW TS-H552B]
    --------------------------------------------------------------

    17:56:48 #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3938156544, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1922928 | lead-out | 1 | 0x00 | 0x41

    17:56:48 #12 Phase 24 File dlgbrnst.cpp, Line 1855
    Caching of files started

    17:56:49 #13 Text 0 File Burncd.cpp, Line 4163
    Cache writing successful.

    17:56:49 #14 Phase 25 File dlgbrnst.cpp, Line 1855
    Caching of files completed

    17:56:49 #15 Phase 36 File dlgbrnst.cpp, Line 1855
    Burn process started at 2x (2.770 KB/s)

    17:56:49 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    17:56:49 #17 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 23:53,320 (1433320ms) -> OK

    17:56:49 #18 Text 0 File DVDR.cpp, Line 2000
    Recording mode: Sequential Recording Mode

    17:56:49 #19 Text 0 File Mmc.cpp, Line 20660
    Set BUFE: Super Link -> ON

    17:56:49 #20 Text 0 File DVDR.cpp, Line 2141
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    17:56:49 #21 Text 0 File Cdrdrv.cpp, Line 8230
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    17:56:55 #22 Text 0 File Cdrdrv.cpp, Line 1297
    17:56:55.765 - TSSTcorp CD/DVDW TS-H552B\H1 T0 : Queue again later

    18:20:20 #23 SCSI -1135 File Cdrdrv.cpp, Line 1445
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03300000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x1B 0xED 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    18:20:20 #24 CDR -1135 File Writer.cpp, Line 304
    Write error

    18:20:20 #25 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    18:20:20 #26 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    18:20:20 #27 Text 0 File DVDR.cpp, Line 2383
    EndDAO: Last written address was 1830303

    18:20:20 #28 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    18:20:20 #29 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    18:20:20 #30 Phase 38 File dlgbrnst.cpp, Line 1855
    Burn process failed at 2x (2.770 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04-08-2004 2:07:00 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======

    Team ETH0
    serial removed

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22-07-2004 17:33:44
    Nero version: 6.3.1.25
    CD-ROM: <HL-DT-ST DVDRAM GSA-4081B>Version: A104 - HA 0 TA 1 - 6.3.1.25
    Adapter driver: <atapi> HA 0

    === Scsi-Device-Map ===
    DiskPeripheral : SAMSUNG SP1203N atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 0 ID 1 DMA: Off
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVDRAM GSA-4081 F: CDRom0
    TSSTcorp CD/DVDW TS-H552 G: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 122MB (125892kB)
    Memory in use : 75 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    5.10.2004
    CD-ROM (ISO)

    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04-08-2004 2:07:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======

    Team ETH0
    serial removed

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22-07-2004 17:33:44
    Nero version: 6.3.1.25
    Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A104 - HA 0 TA 1 - 6.3.1.25
    Adapter driver: <atapi> HA 0
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <HL-DT-ST DVDRAM GSA-4081B>Version: A104 - HA 0 TA 1 - 6.3.1.25
    Adapter driver: <atapi> HA 0

    === Scsi-Device-Map ===
    DiskPeripheral : SAMSUNG SP1203N atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 0 ID 1 DMA: Off
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVDRAM GSA-4081 F: CDRom0
    TSSTcorp CD/DVDW TS-H552 G: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 110MB (112868kB)
    Memory in use : 78 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    5.10.2004
    ISO compilation
    19:05:16 #1 Text 0 File Isodoc.cpp, Line 6083
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    19:05:16 #2 Text 0 File Reader.cpp, Line 126
    Reader running

    19:05:16 #3 Text 0 File Writer.cpp, Line 124
    Writer HL-DT-ST DVDRAM GSA-4081B running

    19:05:16 #4 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    19:05:16 #5 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-at-once, using DVD media

    19:05:40 #6 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1922927 (427:19.02, 3755MB)

    19:05:40 #7 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    19:05:40 #8 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: HL-DT-ST DVDRAM GSA-4081B, Media type: DVD-R
    Disc Manufacturer: VDSPMS - AB 01
    Disc Application Code: 64, Disc Physical Code: 193

    19:05:40 #9 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    19:05:40 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1922928 (1922928) = #1922928/427:19.3
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1922928 blocks [HL-DT-ST DVDRAM GSA-4081B]
    --------------------------------------------------------------

    19:05:40 #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3938156544, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1922928 | lead-out | 1 | 0x00 | 0x41

    19:05:40 #12 Phase 24 File dlgbrnst.cpp, Line 1855
    Caching of files started

    19:05:42 #13 Text 0 File Burncd.cpp, Line 4163
    Cache writing successful.

    19:05:42 #14 Phase 25 File dlgbrnst.cpp, Line 1855
    Caching of files completed

    19:05:42 #15 Phase 36 File dlgbrnst.cpp, Line 1855
    Burn process started at 2x (2.770 KB/s)

    19:05:43 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    19:05:43 #17 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 23:53,320 (1433320ms) -> OK

    19:05:43 #18 Text 0 File DVDR.cpp, Line 2000
    Recording mode: Sequential Recording Mode

    19:05:43 #19 Text 0 File Mmc.cpp, Line 20660
    Set BUFE: supported -> ON

    19:05:43 #20 Text 0 File DVDR.cpp, Line 2141
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    19:05:43 #21 Text 0 File Cdrdrv.cpp, Line 8230
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    19:05:51 #22 Text 0 File Cdrdrv.cpp, Line 1297
    19:05:51.078 - HL-DT-ST DVDRAM GSA-4081B\H0 T1 : Queue again later

    19:30:14 #23 Text 0 File WriterStatus.cpp, Line 115
    <HL-DT-ST DVDRAM GSA-4081B> start writing Lead-Out at LBA 1922928 (1D5770h), lenght 0 blocks

    19:30:15 #24 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    19:30:15 #25 Text 0 File DVDR.cpp, Line 2383
    EndDAO: Last written address was 1922927

    19:31:22 #26 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    19:31:22 #27 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    19:31:22 #28 Phase 37 File dlgbrnst.cpp, Line 1855
    Burn process completed successfully at 2x (2.770 KB/s)

    19:31:22 #29 Phase 78 File dlgbrnst.cpp, Line 1855
    Data verification started

    19:37:27 #30 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\Diciopedia 2004\D2004_CD1.B5I
    Diciopedia 2004\D2004_CD1.B5I

    19:40:53 #31 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\Diciopedia 2004\D2004_CD2.B5I
    Diciopedia 2004\D2004_CD2.B5I

    19:41:34 #32 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\Diciopedia 2004\D2004_CD3.B5I
    Diciopedia 2004\D2004_CD3.B5I

    19:49:33 #33 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\SonicReelDVD v3.0.3\Sonic CinePlayer 1.5 Install\Sonic CinePlayer 1.5 Install.exe
    SonicReelDVD v3.0.3\Sonic CinePlayer 1.5 Install\Sonic CinePlayer 1.5 Install.exe

    19:53:03 #34 VERIFYERR 13 File UDFCompilationImpl.cpp, Line 1385
    Status summary
    Total files=311, identical=307, different=4, inaccessible=0, skipped=0.

    19:53:03 #35 Phase 81 File dlgbrnst.cpp, Line 1855
    Data verification failed


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04-08-2004 2:07:00 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======

    Team ETH0
    serial removed

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22-07-2004 17:33:44
    Nero version: 6.3.1.25
    Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS04 - HA 1 TA 0 - 6.3.1.25
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <HL-DT-ST DVDRAM GSA-4081B>Version: A104 - HA 0 TA 1 - 6.3.1.25
    Adapter driver: <atapi> HA 0

    === Scsi-Device-Map ===
    DiskPeripheral : SAMSUNG SP1203N atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 0 ID 1 DMA: Off
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVDRAM GSA-4081 F: CDRom0
    TSSTcorp CD/DVDW TS-H552 G: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 212MB (217364kB)
    Memory in use : 58 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    5.10.2004
    ISO compilation
    21:57:17 #1 Text 0 File Isodoc.cpp, Line 6083
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    21:57:17 #2 Text 0 File Reader.cpp, Line 126
    Reader running

    21:57:17 #3 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    21:57:18 #4 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-at-once, using DVD media

    21:57:47 #5 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1922959 (427:19.34, 3755MB)

    21:57:47 #6 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    21:57:47 #7 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
    Disc Manufacturer: GRUPO - CONDOR
    Disc Application Code: 64, Disc Physical Code: 193

    21:57:47 #8 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert the disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD+R9 Double Layer.)

    21:57:47 #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1922960 (1922960) = #1922960/427:19.35
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1922960 blocks [TSSTcorp CD/DVDW TS-H552B]
    --------------------------------------------------------------


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04-08-2004 2:07:00 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======

    Team ETH0
    serial removed
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22-07-2004 17:33:44
    Nero version: 6.3.1.25
    Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS04 - HA 1 TA 0 - 6.3.1.25
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <HL-DT-ST DVDRAM GSA-4081B>Version: A104 - HA 0 TA 1 - 6.3.1.25
    Adapter driver: <atapi> HA 0

    === Scsi-Device-Map ===
    DiskPeripheral : SAMSUNG SP1203N atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 0 ID 1 DMA: Off
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVDRAM GSA-4081 F: CDRom0
    TSSTcorp CD/DVDW TS-H552 G: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 223MB (228408kB)
    Memory in use : 56 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    5.10.2004
    ISO compilation
    22:00:56 #1 Text 0 File Isodoc.cpp, Line 6083
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    22:00:56 #2 Text 0 File Reader.cpp, Line 126
    Reader running

    22:00:56 #3 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    22:00:56 #4 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-at-once, using DVD media

    22:00:56 #5 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1922959 (427:19.34, 3755MB)

    22:00:56 #6 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    22:00:56 #7 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
    Disc Manufacturer: GRUPO - CONDOR
    Disc Application Code: 64, Disc Physical Code: 193

    22:00:56 #8 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    22:00:56 #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1922960 (1922960) = #1922960/427:19.35
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1922960 blocks [TSSTcorp CD/DVDW TS-H552B]
    --------------------------------------------------------------


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04-08-2004 2:07:00 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======

    Team ETH0
    serial removed

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22-07-2004 17:33:44
    Nero version: 6.3.1.25
    Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS04 - HA 1 TA 0 - 6.3.1.25
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <HL-DT-ST DVDRAM GSA-4081B>Version: A104 - HA 0 TA 1 - 6.3.1.25
    Adapter driver: <atapi> HA 0

    === Scsi-Device-Map ===
    DiskPeripheral : SAMSUNG SP1203N atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 0 ID 1 DMA: Off
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVDRAM GSA-4081 F: CDRom0
    TSSTcorp CD/DVDW TS-H552 G: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 153MB (156752kB)
    Memory in use : 70 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    5.10.2004
    ISO compilation
    22:01:34 #1 SCSI -1033 File Cdrdrv.cpp, Line 1191
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x01

    22:01:34 #2 SCSI -1033 File Cdrdrv.cpp, Line 1191
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x01

    22:01:36 #3 Text 0 File Isodoc.cpp, Line 6083
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    22:01:36 #4 Text 0 File Reader.cpp, Line 126
    Reader running

    22:01:36 #5 Text 0 File Writer.cpp, Line 124
    Writer TSSTcorp CD/DVDW TS-H552B running

    22:01:36 #6 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    22:01:36 #7 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-at-once, using DVD media

    22:01:40 #8 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1922927 (427:19.02, 3755MB)

    22:01:40 #9 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    22:01:40 #10 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
    Disc Manufacturer: GRUPO - CONDOR
    Disc Application Code: 64, Disc Physical Code: 193

    22:01:40 #11 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    22:01:40 #12 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1922928 (1922928) = #1922928/427:19.3
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1922928 blocks [TSSTcorp CD/DVDW TS-H552B]
    --------------------------------------------------------------

    22:01:45 #13 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3938156544, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1922928 | lead-out | 1 | 0x00 | 0x41

    22:01:45 #14 Phase 24 File dlgbrnst.cpp, Line 1855
    Caching of files started

    22:01:47 #15 Text 0 File Burncd.cpp, Line 4163
    Cache writing successful.

    22:01:47 #16 Phase 25 File dlgbrnst.cpp, Line 1855
    Caching of files completed

    22:01:47 #17 Phase 36 File dlgbrnst.cpp, Line 1855
    Burn process started at 2x (2.770 KB/s)

    22:01:47 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    22:01:47 #19 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 23:53,320 (1433320ms) -> OK

    22:01:47 #20 Text 0 File DVDR.cpp, Line 2000
    Recording mode: Sequential Recording Mode for Multisession

    22:01:47 #21 Text 0 File Mmc.cpp, Line 20660
    Set BUFE: Super Link -> ON

    22:01:47 #22 Text 0 File DVDR.cpp, Line 2141
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    22:01:47 #23 Text 0 File Cdrdrv.cpp, Line 8230
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    22:01:53 #24 Text 0 File Cdrdrv.cpp, Line 1297
    22:01:53.890 - TSSTcorp CD/DVDW TS-H552B\H1 T0 : Queue again later

    22:02:02 #25 SCSI -1135 File Cdrdrv.cpp, Line 1445
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x032E0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x0D 0x40 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    22:02:02 #26 CDR -1135 File Writer.cpp, Line 304
    Write error

    22:02:02 #27 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    22:02:02 #28 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    22:02:03 #29 Text 0 File DVDR.cpp, Line 2383
    EndDAO: Last written address was 3391

    22:02:03 #30 Phase 133 File dlgbrnst.cpp, Line 1855
    Writing short lead-out

    22:03:56 #31 SCSI -1176 File Cdrdrv.cpp, Line 1191
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x72
    Sense Qual: 0x00
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x72 0x00

    22:04:05 #32 SCSI -1176 File Cdrdrv.cpp, Line 1191
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x72
    Sense Qual: 0x02
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x72 0x02

    22:04:05 #33 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    22:04:05 #34 CDR -1176 File WriterStatus.cpp, Line 164
    Session fixation error

    22:04:05 #35 TRANSFER -24 File WriterStatus.cpp, Line 164
    Could not perform end of Disc-at-once

    22:04:05 #36 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    22:04:05 #37 Phase 38 File dlgbrnst.cpp, Line 1855
    Burn process failed at 2x (2.770 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04-08-2004 2:07:00 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======

    Team ETH0
    serial removed

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22-07-2004 17:33:44
    Nero version: 6.3.1.25
    Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS04 - HA 1 TA 0 - 6.3.1.25
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <HL-DT-ST DVDRAM GSA-4081B>Version: A104 - HA 0 TA 1 - 6.3.1.25
    Adapter driver: <atapi> HA 0

    === Scsi-Device-Map ===
    DiskPeripheral : SAMSUNG SP1203N atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 0 ID 1 DMA: Off
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVDRAM GSA-4081 F: CDRom0
    TSSTcorp CD/DVDW TS-H552 G: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 106MB (109360kB)
    Memory in use : 79 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    5.10.2004
    ISO compilation
    22:05:32 #1 Text 0 File Isodoc.cpp, Line 6083
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    22:05:32 #2 Text 0 File Reader.cpp, Line 126
    Reader running

    22:05:32 #3 Text 0 File Writer.cpp, Line 124
    Writer TSSTcorp CD/DVDW TS-H552B running

    22:05:32 #4 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    22:05:33 #5 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-at-once, using DVD media

    22:05:33 #6 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 1922927 (427:19.02, 3755MB)

    22:05:33 #7 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    22:05:33 #8 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD+R
    Disc Manufacturer ID: VDSPMSAB, Media Type ID: 001, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 3

    22:05:33 #9 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    22:05:33 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1922928 (1922928) = #1922928/427:19.3
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1922928 blocks [TSSTcorp CD/DVDW TS-H552B]
    --------------------------------------------------------------

    22:05:33 #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3938156544, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1922928 | lead-out | 1 | 0x00 | 0x41

    22:05:33 #12 Phase 24 File dlgbrnst.cpp, Line 1855
    Caching of files started

    22:05:33 #13 Text 0 File Burncd.cpp, Line 4163
    Cache writing successful.

    22:05:33 #14 Phase 25 File dlgbrnst.cpp, Line 1855
    Caching of files completed

    22:05:33 #15 Phase 36 File dlgbrnst.cpp, Line 1855
    Burn process started at 2.4x (3.324 KB/s)

    22:05:33 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    22:05:33 #17 Text 0 File Cdrdrv.cpp, Line 8230
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: VDSPMSAB
    Media type ID: 001
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 56 44 53 50 4D - 53 41 42 30 30 31 01 38 ...VDSPMSAB001.8
    23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T..............
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    22:05:33 #18 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 20:07,589 (1207589ms) -> OK

    22:05:33 #19 Text 0 File DVDPlusRW.cpp, Line 628
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    22:25:18 #20 Text 0 File WriterStatus.cpp, Line 115
    <TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 1922928 (1D5770h), lenght 0 blocks

    22:25:18 #21 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    22:25:50 #22 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    22:25:50 #23 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    22:25:50 #24 Phase 37 File dlgbrnst.cpp, Line 1855
    Burn process completed successfully at 2.4x (3.324 KB/s)

    22:25:50 #25 Phase 78 File dlgbrnst.cpp, Line 1855
    Data verification started

    22:27:47 #26 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\Adobe Encore DVD\Library Content\Menu Templates\PAL\PAL_Scientific Menu.psd
    Adobe Encore DVD\Library Content\Menu Templates\PAL\PAL_Scientific Menu.psd

    22:32:26 #27 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\Diciopedia 2004\D2004_CD2.B5I
    Diciopedia 2004\D2004_CD2.B5I

    22:32:34 #28 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\Diciopedia 2004\D2004_CD3.B5I
    Diciopedia 2004\D2004_CD3.B5I

    22:37:57 #29 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\Sonic.DVDit.Special.Edition.v2.5-PARADOX\data2.cab

    Sonic.DVDit.Special.Edition.v2.5-PARADOX\data2.cab

    22:38:06 #30 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\SonicReelDVD v3.0.3\Sonic CinePlayer 1.5 Install\Sonic CinePlayer 1.5 Install.exe
    SonicReelDVD v3.0.3\Sonic CinePlayer 1.5 Install\Sonic CinePlayer 1.5 Install.exe

    22:39:39 #31 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\Ulead.dvd.moviefactory.v3.disc.creator-tda\tda-udm3.014
    ULEAD.DVD.MOVIEFACTORY.V3.DISC.CREATOR-TDA\tda-udm3.014

    22:39:48 #32 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\Ulead.dvd.moviefactory.v3.disc.creator-tda\tda-udm3.016
    ULEAD.DVD.MOVIEFACTORY.V3.DISC.CREATOR-TDA\tda-udm3.016

    22:40:32 #33 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\Ulead.dvd.moviefactory.v3.disc.creator-tda\tda-udm3.023
    ULEAD.DVD.MOVIEFACTORY.V3.DISC.CREATOR-TDA\tda-udm3.023

    22:40:34 #34 VERIFYERR 1 File UDFCompilationImpl.cpp, Line 1695
    Files are different
    E:\Share\Videos\_dvd_gravar2\Ulead.dvd.moviefactory.v3.disc.creator-tda\tda-udm3.024
    ULEAD.DVD.MOVIEFACTORY.V3.DISC.CREATOR-TDA\tda-udm3.024

    22:40:42 #35 VERIFYERR 13 File UDFCompilationImpl.cpp, Line 1385
    Status summary
    Total files=311, identical=302, different=9, inaccessible=0, skipped=0.

    22:40:42 #36 Phase 81 File dlgbrnst.cpp, Line 1855
    Data verification failed


    Existing drivers:
    File 'Drivers\
     
    Last edited: Oct 9, 2004
  12. Nephilim

    Nephilim Moderator Staff Member

    Joined:
    Feb 13, 2003
    Messages:
    14,942
    Likes Received:
    0
    Trophy Points:
    116
    That makes my brain hurt.

    Let me see if ccampbell can make some sense of it :)
     
  13. antoniomc

    antoniomc Member

    Joined:
    Oct 6, 2004
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    11
    I really hope so, because I'm completly out of ideas...

    I thank you for your effort to trying to help me.
     
  14. ccampbell

    ccampbell Regular member

    Joined:
    Mar 24, 2004
    Messages:
    757
    Likes Received:
    0
    Trophy Points:
    26
    Hi Antoniomc,

    In one of the log files, it shows a write error has occured.

    Just as a test, though it may not help any, try with DVD High compatibility mode disabled. To do this from Nero Burning ROM, just go to Recorder->Choose Recorder and click on the Options button and there you can disable this feature.

    In Nero Express, in the Final Burn Settings window, you can select the Options button and disable the feature there.

    One question though. Have you tried reading or playing those disc you are getting the Verify error messages on? Just to see if they are usable? I've seen on occastion when a verify failed but the CD/DVD was still usable.

    Regards,

    Craig

    Ahead Software
    USA
     
  15. antoniomc

    antoniomc Member

    Joined:
    Oct 6, 2004
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    11
    I will try now to burn a DVD without the DVD High compatibility enabled, and post here the results.

    About using the DVD after burning, I can't.
    Because some files are really different.
    For example, RAR files in the DVD give me CRC errors while extracting the files from them, and some of them just don't open.
    The original RAR file is OK.

    I've used also the "FC" command from line prompt to compare the files. The FC command also says they are different
     

Share This Page