1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

DVD is written, but cannot be read

Discussion in 'DVDR' started by pete_m, Oct 11, 2007.

  1. pete_m

    pete_m Member

    Joined:
    Oct 11, 2007
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    OK, I've found several threads with this topic, but most taper off to say "use better media" or "your dvd drive is bad".

    I use Taio Yuden DVDs exclusively. My DVD burner is a BenQ 1655. I have made dozens of working DVDs with this combo, using Nero 6, DVDCrypt, DVDShrink in various combinations. Now, all of a sudden, when I write a blank DVD using either Nero or ImgBurn, I cannot read the resulting disc. Many times, Nero reports a successful burn, sometimes it reports a write failure. Write speed seems not an issue, as I have used 2.4x, 4x, 8x, and even 16x getting "success" reports. I have tried removing INCD from my system (Windows XP), but that seems to make no difference.

    Want a typical Nero log entry? Here:
    ------------------------
    ====== *** Nero-Burning Rom, History File *** ======

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 6.6.1.15
    Internal Version: 6, 6, 1, 15

    Recorder: <BENQ DVD LS DW1655> Version: BCGB - HA 1 TA 1 - 6.6.1.15
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <NERO IMAGEDRIVE2 >Version: 2.26 - HA 1 TA 2 - 6.6.1.15
    Adapter driver: <SCSI> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600JS-75NCB1 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CD-R/RW SW-224B atapi Port 3 ID 0 DMA: On
    CdRomPeripheral : BENQ DVD LS DW1655 atapi Port 3 ID 1 DMA: On
    CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 4 ID 0 DMA: Off
    CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 4 ID 1 DMA: Off

    === CDRom-Device-Map ===
    BENQ DVD LS DW1655 D: CDRom1
    SAMSUNG CD-R/RW SW-224B E: CDRom0
    NERO IMAGEDRIVE2 H: CDRom2
    NERO IMAGEDRIVE2 I: CDRom3
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1023MB (1048044kB)
    Free physical memory: 617MB (632248kB)
    Memory in use : 39
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.10.2007
    UDF/ISO compilation
    5:34:07 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    5:34:07 PM #2 Phase 112 File dlgbrnst.cpp, Line 1685
    DVD-Video files reallocation started

    5:34:07 PM #3 Phase 114 File dlgbrnst.cpp, Line 1685
    DVD-Video files reallocation completed (no file modified)

    5:34:07 PM #4 Text 0 File Isodoc.cpp, Line 6494
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : TRUE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Options : automatic
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : FALSE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    5:34:07 PM #5 Phase 111 File dlgbrnst.cpp, Line 1685
    DVD-Video files sorted

    5:34:07 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    5:34:07 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    5:34:07 PM #8 Text 0 File Burncd.cpp, Line 3316
    Turn on Disc-At-Once, using DVD media

    5:34:07 PM #9 Text 0 File DlgWaitCD.cpp, Line 281
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2088783 (464:10.33, 4079MB)

    5:34:07 PM #10 Text 0 File DlgWaitCD.cpp, Line 293
    Write in overburning mode: NO (enabled: CD)

    5:34:07 PM #11 Text 0 File DlgWaitCD.cpp, Line 2616
    Recorder: BENQ DVD LS DW1655, Media type: DVD-R
    Disc Manufacturer: TYG03 -
    Disc Application Code: 64, Disc Physical Code: 193

    5:34:07 PM #12 Text 0 File DlgWaitCD.cpp, Line 459
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    5:34:07 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 814
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2088784 (2088784) = #2088784/464:10.34
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2088784 blocks [BENQ DVD LS DW1655 ]
    --------------------------------------------------------------

    5:34:07 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1013
    Prepare recorder [BENQ DVD LS DW1655] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4277829632, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2088784 | lead-out | 1 | 0x41 | 0x00

    5:34:07 PM #15 Text 0 File SCSIPTICommands.cpp, Line 208
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    5:34:07 PM #16 Phase 24 File dlgbrnst.cpp, Line 1685
    Caching of files started

    5:34:07 PM #17 Text 0 File Burncd.cpp, Line 4158
    Cache writing successful.

    5:34:07 PM #18 Phase 25 File dlgbrnst.cpp, Line 1685
    Caching of files completed

    5:34:07 PM #19 Phase 28 File dlgbrnst.cpp, Line 1685
    Speed measurement started

    5:34:07 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2717
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    5:35:33 PM #21 Text 0 File WriterStatus.cpp, Line 113
    <BENQ DVD LS DW1655 > start writing Lead-Out at LBA 2088784 (1FDF50h), length 0 blocks

    5:35:33 PM #22 Phase 29 File dlgbrnst.cpp, Line 1634
    Speed measurement completed: 35.4x (48,878 KB/s)

    5:35:33 PM #23 Phase 32 File dlgbrnst.cpp, Line 1685
    Simulation started at 16x (22,160 KB/s)

    5:35:39 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2717
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    5:35:39 PM #25 Text 0 File DVDR.cpp, Line 2846
    Recording mode: Sequential Recording Mode

    5:35:39 PM #26 Text 0 File DVDR.cpp, Line 3002
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    5:35:39 PM #27 Text 0 File Cdrdrv.cpp, Line 8737
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    5:40:32 PM #28 Text 0 File WriterStatus.cpp, Line 113
    <BENQ DVD LS DW1655 > start writing Lead-Out at LBA 2088784 (1FDF50h), length 0 blocks

    5:40:32 PM #29 Text 0 File DVDR.cpp, Line 3246
    EndDAO: Last written address was 2088783

    5:41:11 PM #30 Phase 33 File dlgbrnst.cpp, Line 1685
    Simulation completed successfully at 16x (22,160 KB/s)

    5:41:12 PM #31 Phase 36 File dlgbrnst.cpp, Line 1685
    Burn process started at 16x (22,160 KB/s)

    5:41:12 PM #32 Text 0 File ThreadedTransferInterface.cpp, Line 2717
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    5:41:12 PM #33 Text 0 File DVDR.cpp, Line 2846
    Recording mode: Sequential Recording Mode

    5:41:12 PM #34 Text 0 File DVDR.cpp, Line 3002
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    5:41:12 PM #35 Text 0 File Cdrdrv.cpp, Line 8737
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    5:47:41 PM #36 Text 0 File WriterStatus.cpp, Line 113
    <BENQ DVD LS DW1655 > start writing Lead-Out at LBA 2088784 (1FDF50h), length 0 blocks

    5:47:41 PM #37 Text 0 File DVDR.cpp, Line 3246
    EndDAO: Last written address was 2088783

    5:48:04 PM #38 Phase 37 File dlgbrnst.cpp, Line 1685
    Burn process completed successfully at 16x (22,160 KB/s)

    5:48:05 PM #39 Text 0 File SCSIPTICommands.cpp, Line 253
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    5:48:09 PM #40 Text 0 File Cdrdrv.cpp, Line 9945
    DriveLocker: UnLockVolume completed

    5:48:09 PM #41 Text 0 File SCSIPTICommands.cpp, Line 403
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:
    File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 5:00:00 AM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    ---------

    And here is an "unsuccessful report" (note that the writer speed is only 2.4X):

    -----------

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 6.6.1.15
    Internal Version: 6, 6, 1, 15

    Recorder: <BENQ DVD LS DW1655> Version: BCGB - HA 1 TA 5 - 6.6.1.15
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <NERO IMAGEDRIVE2 >Version: 2.26 - HA 1 TA 2 - 6.6.1.15
    Adapter driver: <SCSI> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600JS-75NCB1 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CD-R/RW SW-224B atapi Port 3 ID 0 DMA: On
    CdRomPeripheral : BENQ DVD LS DW1655 atapi Port 3 ID 1 DMA: On
    CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 4 ID 0 DMA: Off
    CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 4 ID 1 DMA: Off

    === CDRom-Device-Map ===
    BENQ DVD LS DW1655 D: CDRom5
    SAMSUNG CD-R/RW SW-224B E: CDRom0
    NERO IMAGEDRIVE2 H: CDRom2
    NERO IMAGEDRIVE2 I: CDRom3
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1023MB (1048044kB)
    Free physical memory: 454MB (465344kB)
    Memory in use : 55 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    7.10.2007
    UDF/ISO compilation
    8:11:18 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    8:11:19 PM #2 Phase 112 File dlgbrnst.cpp, Line 1685
    DVD-Video files reallocation started

    8:11:19 PM #3 Phase 114 File dlgbrnst.cpp, Line 1685
    DVD-Video files reallocation completed (no file modified)

    8:11:19 PM #4 Text 0 File Isodoc.cpp, Line 6494
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Options : automatic
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    8:11:19 PM #5 Phase 111 File dlgbrnst.cpp, Line 1685
    DVD-Video files sorted

    8:11:19 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    8:11:19 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    8:11:19 PM #8 Text 0 File Burncd.cpp, Line 3316
    Turn on Disc-At-Once, using DVD media

    8:11:19 PM #9 Text 0 File DlgWaitCD.cpp, Line 281
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286127 (508:01.52, 4465MB)

    8:11:19 PM #10 Text 0 File DlgWaitCD.cpp, Line 293
    Write in overburning mode: NO (enabled: CD)

    8:11:19 PM #11 Text 0 File DlgWaitCD.cpp, Line 2616
    Recorder: BENQ DVD LS DW1655, Media type: DVD-R
    Disc Manufacturer: TYG02 -
    Disc Application Code: 64, Disc Physical Code: 193

    8:11:19 PM #12 Text 0 File DlgWaitCD.cpp, Line 459
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    8:11:19 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 814
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [BENQ DVD LS DW1655 ]
    --------------------------------------------------------------

    8:11:19 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1013
    Prepare recorder [BENQ DVD LS DW1655] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286128 | lead-out | 1 | 0x41 | 0x00

    8:11:19 PM #15 Text 0 File SCSIPTICommands.cpp, Line 208
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    8:11:19 PM #16 Phase 24 File dlgbrnst.cpp, Line 1685
    Caching of files started

    8:11:19 PM #17 Text 0 File Burncd.cpp, Line 4158
    Cache writing successful.

    8:11:19 PM #18 Phase 25 File dlgbrnst.cpp, Line 1685
    Caching of files completed

    8:11:19 PM #19 Phase 36 File dlgbrnst.cpp, Line 1685
    Burn process started at 2.4x (3,324 KB/s)

    8:11:19 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2717
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    8:11:19 PM #21 Text 0 File DVDR.cpp, Line 2846
    Recording mode: Sequential Recording Mode

    8:11:19 PM #22 Text 0 File DVDR.cpp, Line 3002
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    8:11:19 PM #23 Text 0 File Cdrdrv.cpp, Line 8737
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    8:11:45 PM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 178
    CdRom5: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 00 15 20 00 00 20 00 00 00
    Sense Area: 0x71 00 03 00 00 00 00 12 00 00 00 00 0C
    Buffer x05be2a80: Len x10000
    0x00 00 01 BA 44 01 74 4E 9D D9 01 89 C3 F8 00 00
    0x01 E0 07 EC 81 00 00 0B 01 9C 79 AB 1D 20 49 FE
    0x2C 33 3E 5E 3E B9 F0 2B B8 DC 24 75 97 96 5B A9

    8:11:45 PM #25 CDR -1135 File Writer.cpp, Line 281
    Write error
    D: BENQ DVD LS DW1655

    8:11:45 PM #26 Text 0 File DVDR.cpp, Line 3246
    EndDAO: Last written address was 5407

    8:11:46 PM #27 Phase 38 File dlgbrnst.cpp, Line 1685
    Burn process failed at 2.4x (3,324 KB/s)

    8:11:46 PM #28 Text 0 File SCSIPTICommands.cpp, Line 253
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    8:11:50 PM #29 Text 0 File Cdrdrv.cpp, Line 9945
    DriveLocker: UnLockVolume completed

    8:11:50 PM #30 Text 0 File SCSIPTICommands.cpp, Line 403
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 9/13/2004 11:54:06 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 9/13/2004 11:54:46 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 9/13/2004 11:58:10 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 5:00:00 AM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)

    ------------------------


    So, I am going nuts with more than 12 coasters at this point, using different burn pgms and speeds. What is not understood is that my system worked perfectly until about 3 weeks ago. As Curly (of the 3 Stooges) once said: "What Happened!?"
     
  2. pete_m

    pete_m Member

    Joined:
    Oct 11, 2007
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11

    Oh yeah, a little more data for you:

    I have a Panasonic 80MB HDD / DVD recorder attached to my TV set (about 4 years old and working just fine).

    Sometimes, if I try to put one of the "successful" coasters into this unit, I get a message that reads: "Incorrect region, cannot play disc."

    Of course, the region coding was removed from the video tracks before burining, so something is really munged here....

     

Share This Page