1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

DVD Ram Drive Wont Burn To Disk

Discussion in 'Nero discussion' started by dougal79, Feb 14, 2008.

  1. dougal79

    dougal79 Regular member

    Joined:
    Aug 11, 2006
    Messages:
    483
    Likes Received:
    0
    Trophy Points:
    26
    Im trying to burn some music files to Verbatim DVD-R disks.
    Every time i try with Nero 8 i get an error saying burn failed.
    It keeps saying Burner Dirty, but its only about 3/4 months old.
    I had the same problem with my last burner as well.
    Ive tried burning them at lower speeds but it wont work.

    Below is my log from Nero.
    I'd appreciate if anyone could help.

    Neil

    1K22-2867-0K95-****-****-****-****

    Windows XP 5.1
    IA32
    WinAspi: -

    NT-SPTI used
    Nero Version: 8.0.3.0
    Internal Version: 8, 0, 3, 0
    (Nero Express)
    Recorder: <ATAPI DVD A DH20A1P> Version: 6X13 - HA 1 TA 0 - 8.0.3.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default
    CD-ROM: <ATAPI DVD A DH20A1P >Version: 6X13 - HA 1 TA 0 - 8.0.3.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : SAMSUNG SP2504C atapi Port 0 ID 0 DMA: Off
    CdRomPeripheral : ATAPI DVD A DH20A1P atapi Port 2 ID 0 DMA: On
    DiskPeripheral : WDC WD3200JB-00KFA0 atapi Port 3 ID 0 DMA: On
    CdRomPeripheral : MagicISOVirtual DVD-ROM 1.0A mcdbus Port 4 ID 0 DMA: Off
    CdRomPeripheral : LJ8331D MAP121F 1.0 au40vqns Port 5 ID 0 DMA: Off
    CdRomPeripheral : LJ8331D MAP121F 1.0 au40vqns Port 5 ID 1 DMA: Off

    === CDRom-Device-Map ===
    ATAPI DVD A DH20A1P D: CdRom0
    MagicISO Virtual DVD-ROM G: CdRom1
    LJ8331D MAP121F E: CdRom2
    LJ8331D MAP121F F: CdRom3
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 2047MB (2096368kB)
    Free physical memory: 1582MB (1619976kB)
    Memory in use : 22 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    14.2.2008
    ISO compilation
    16:04:31 #1 Text 0 File SCSIPTICommands.cpp, Line 424
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    16:04:32 #2 Text 0 File Isodoc.cpp, Line 6668
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    16:04:32 #3 ISO9660GEN -11 File Geniso.cpp, Line 3345
    First writeable address = 0 (0x00000000)

    16:04:32 #4 Text 0 File Burncd.cpp, Line 3520
    Turn on Disc-At-Once, using DVD media

    16:04:32 #5 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2031903 (451:32.03, 3968MB)

    16:04:32 #6 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD)

    16:04:32 #7 Text 0 File DlgWaitCD.cpp, Line 2972
    Recorder: ATAPI DVD A DH20A1P, Media type: DVD-R
    Disc Manufacturer: TYG03 -
    Disc Application Code: 64, Disc Physical Code: 193

    16:04:32 #8 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    16:04:32 #9 Text 0 File ThreadedTransferInterface.cpp, Line 795
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2031904 (2031904) = #2031904/451:32.4
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2031904 blocks [D: ATAPI DVD A DH20A1P]
    --------------------------------------------------------------

    16:04:32 #10 Text 0 File ThreadedTransferInterface.cpp, Line 997
    Prepare [D: ATAPI DVD A DH20A1P] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4161339392, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 2031904 | 0 | 0x00
    2031904 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    16:04:32 #11 Text 0 File SCSIPTICommands.cpp, Line 215
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    16:04:32 #12 Text 0 File Burncd.cpp, Line 4306
    Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

    16:04:32 #13 Phase 24 File dlgbrnst.cpp, Line 1762
    Caching of files started

    16:04:32 #14 Text 0 File Burncd.cpp, Line 4425
    Cache writing successful.

    16:04:32 #15 Phase 25 File dlgbrnst.cpp, Line 1762
    Caching of files completed

    16:04:32 #16 Phase 36 File dlgbrnst.cpp, Line 1762
    Burn process started at 12x (16,620 KB/s)

    16:04:33 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2723
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    16:04:33 #18 Text 0 File DVDR.cpp, Line 3227
    Recording mode: Sequential Recording Mode

    16:04:33 #19 Text 0 File DVDR.cpp, Line 3383
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    16:04:33 #20 Text 0 File Cdrdrv.cpp, Line 9918
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Revision number of maximum recording speed: 6.0
    Revision number of minimum recording speed: -
    Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
    Class: 0
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    16:04:33 #21 Text 0 File ThreadedTransfer.cpp, Line 269
    Pipe memory size 83836800

    16:05:31 #22 SPTI -1106 File SCSIPassThrough.cpp, Line 181
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x03
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
    Buffer x08d50040: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    16:05:31 #23 CDR -1106 File Writer.cpp, Line 312
    Power calibration error
    D: ATAPI DVD A DH20A1P

    16:05:32 #24 Text 0 File DVDR.cpp, Line 3785
    EndDAO: Last written address was -1 (FFFFFFFFh)

    16:05:32 #25 Phase 38 File dlgbrnst.cpp, Line 1762
    Burn process failed at 12x (16,620 KB/s)

    16:05:32 #26 Text 0 File SCSIPTICommands.cpp, Line 261
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    16:05:32 #27 Text 0 File Cdrdrv.cpp, Line 11159
    DriveLocker: UnLockVolume completed

    16:05:32 #28 Text 0 File SCSIPTICommands.cpp, Line 424
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    Last edited: Feb 16, 2008
  2. ddp

    ddp Moderator Staff Member

    Joined:
    Oct 15, 2004
    Messages:
    39,009
    Likes Received:
    77
    Trophy Points:
    128
    moved to correct forum as not a dvd rom drive issue. edit out the rest of the serial # so nobody does an offensive post about it.
     
  3. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,722
    Likes Received:
    1
    Trophy Points:
    96

    It looks like your burner does not read your discs properly, the firmware is not compatible with your media. You need a firmware uodate.

    Your drive is an OEM, DH-20A1P.The retail version, the "original" liteon drive is LH-20A1P. If you can't find firmware update from yor PC's retailer site, you can cross-flash to the retail version which has better firmware support. The warranty will be voided and there are risks involved with any cross flashing, but what use is a burner with crappy firmware anyway...
    My burner has been working for over 2 years with a cross flashed firmware....

    Read this thread to the end:

    http://forum.rpc1.org/viewtopic.php?t=42293&sid=617ce88e7b76486ead11b46bcbf17146


    http://svp.co.uk/helpdesk/index.php?_m=downloads&_a=viewdownload&downloaditemid=45

    "When you launch the firmware don't forget to TICK the UPDATE BOOT CODE box.

    Follow the prompts. You will get a few warnings but carry on.

    Job Done "
     
    Last edited: Feb 15, 2008

Share This Page