1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

DVD-RAM LG GSA-H22L CAN'T BURN - TRACK FOLLOWING ERROR, COUND NOT PERFORM ENDTRACK, HELP PLS!!!

Discussion in 'Nero discussion' started by aileenc07, Jun 17, 2007.

  1. aileenc07

    aileenc07 Guest

    I tried burning first an image to a cdr and nero express gives me a track following error,and i got the latest nero, updated the firmware, check if its in DMA and it is, here's the log:

    Windows XP 5.1
    IA32
    WinAspi: -

    NT-SPTI used
    Nero Version: 7.9.6.0
    Internal Version: 7, 9, 6, 0

    Recorder: <HL-DT-ST DVD-RAM GSA-H22L>Version: 1.02 - HA 1 TA 0 - 7.9.6.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-RAM GSA-H22L>Version: 1.02 - HA 1 TA 0 - 7.9.6.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H22L atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-RAM GSA-H22L E: CdRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 767MB (785904kB)
    Free physical memory: 488MB (500700kB)
    Memory in use : 36 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    17.6.2007
    CD Image
    2:35:54 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    2:35:55 PM #2 Text 0 File Burncd.cpp, Line 3196
    HL-DT-ST DVD-RAM GSA-H22L
    Buffer underrun protection activated

    2:35:55 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
    Image was written as DAO.
    DAOI:
    MediaCatalogNumber = ''
    TocType = 0x00
    Finalized = 1
    First/Last Track = 1 / 1
    1: ISRC = ''
    Blocksize = 2048
    TrackMode = 'TRM_DATA_MODE1'
    TrackConfig = 0x00
    First/Last Index = 0 / 1
    Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 613797888
    CUES:
    MTYP: Mediumtype = CD (old format) (0x1)
    Image file name: <C:\Documents and Settings\aileen\My Documents\My Completed Downloads\WindowsXPSP2.nrg>

    2:35:55 PM #4 Text 0 File Burncd.cpp, Line 3508
    Turn on Disc-At-Once, using CD-R/RW media

    2:35:55 PM #5 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 359848 ( 79:59.73)
    Last address to be written: 299555 ( 66:36.05)

    2:35:55 PM #6 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD DVD)

    2:35:55 PM #7 Text 0 File DlgWaitCD.cpp, Line 2964
    Recorder: HL-DT-ST DVD-RAM GSA-H22L;
    CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
    ATIP Data:
    Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
    Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 00 00 (invalid)

    2:35:55 PM #8 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    2:35:55 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - CD-ROM Mode 1, Joliet)
    2 indices, index0 (150) provided
    original disc pos #0 + 299556 (299556) = #299556/66:34.6
    not relocatable, disc pos for caching/writing not required/not required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 299556 blocks [E: HL-DT-ST DVD-RAM GSA-H22L]
    --------------------------------------------------------------

    2:35:55 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
    Prepare [E: HL-DT-ST DVD-RAM GSA-H22L] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 613797888, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    -150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 299556 | 0 | 0x00
    299556 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    2:36:15 PM #11 Text 0 File SCSIPTICommands.cpp, Line 238
    Error on LockVolume: Access is denied.


    2:36:15 PM #12 Text 0 File SCSIPTICommands.cpp, Line 288
    SPTI - Error 5 on DismountVolue: Access is denied.


    2:36:25 PM #13 Text 0 File SCSIPTICommands.cpp, Line 238
    Error on LockVolume: Access is denied.


    2:36:25 PM #14 Text 0 File Burncd.cpp, Line 4294
    Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

    2:36:25 PM #15 Phase 24 File dlgbrnst.cpp, Line 1762
    Caching of files started

    2:36:25 PM #16 Text 0 File Burncd.cpp, Line 4413
    Cache writing successful.

    2:36:25 PM #17 Phase 25 File dlgbrnst.cpp, Line 1762
    Caching of files completed

    2:36:25 PM #18 Phase 36 File dlgbrnst.cpp, Line 1762
    Burn process started at 48x (7,200 KB/s)

    2:36:25 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2721
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    2:36:25 PM #20 Text 0 File MMC.cpp, Line 17687
    StartDAO : CD-Text - Off

    2:36:25 PM #21 Text 0 File MMC.cpp, Line 22363
    Set BUFE: Buffer underrun protection -> ON

    2:36:25 PM #22 Text 0 File MMC.cpp, Line 17915
    CueData, Len=32
    41 00 00 14 00 00 00 00
    41 01 00 10 00 00 00 00
    41 01 01 10 00 00 02 00
    41 aa 01 14 00 42 24 06

    2:36:25 PM #23 Text 0 File ThreadedTransfer.cpp, Line 269
    Pipe memory size 83836800

    2:38:28 PM #24 SPTI -1119 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1119)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x09
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 00 0D 20 00 00 20 00 00 00
    Sense Area: 0x70 00 04 00 00 00 00 0E 00 00 00 00 09
    Buffer x07c71bc0: Len x10000
    0x57 FD D1 F9 AC 70 D7 12 BE 5C 3A F1 10 01 62 3C
    0x8D AC 8E 2E 3D 7F A9 FD 8E 04 FE C9 D0 54 DF F1
    0xE0 F4 39 E8 50 A3 AB 14 33 3F 07 C6 C3 55 7B 6E

    2:38:28 PM #25 CDR -1119 File Writer.cpp, Line 303
    Track following error
    E: HL-DT-ST DVD-RAM GSA-H22L

    2:38:28 PM #26 Phase 38 File dlgbrnst.cpp, Line 1762
    Burn process failed at 48x (7,200 KB/s)

    2:38:35 PM #27 Text 0 File SCSIPTICommands.cpp, Line 288
    SPTI - Error 5 on DismountVolue: Access is denied.


    2:38:40 PM #28 Text 0 File Cdrdrv.cpp, Line 11185
    DriveLocker: UnLockVolume completed

    2:38:40 PM #29 Text 0 File SCSIPTICommands.cpp, Line 424
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


    THEN I TRIED BURNING A DATA ON A DVD, IT'S ALSO GIVES AN ERROR, HERE'S THE LOG:

    Windows XP 5.1
    IA32
    WinAspi: -

    NT-SPTI used
    Nero Version: 7.9.6.0
    Internal Version: 7, 9, 6, 0
    (Nero Express)
    Recorder: <HL-DT-ST DVD-RAM GSA-H22L>Version: 1.02 - HA 1 TA 0 - 7.9.6.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-RAM GSA-H22L>Version: 1.02 - HA 1 TA 0 - 7.9.6.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H22L atapi Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-RAM GSA-H22L E: CdRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 767MB (785904kB)
    Free physical memory: 371MB (380168kB)
    Memory in use : 51 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    17.6.2007
    ISO compilation
    4:11:00 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    4:11:01 PM #2 Text 0 File Isodoc.cpp, Line 6663
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    4:11:01 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
    First writeable address = 0 (0x00000000)

    4:11:01 PM #4 Text 0 File Burncd.cpp, Line 3508
    Turn on Disc-At-Once, using DVD media

    4:11:01 PM #5 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 147135 ( 32:41.60, 287MB)

    4:11:01 PM #6 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD DVD)

    4:11:01 PM #7 Text 0 File DlgWaitCD.cpp, Line 2964
    Recorder: HL-DT-ST DVD-RAM GSA-H22L, Media type: DVD+R
    Disc Manufacturer ID: MBIPG101, Media Type ID: R05, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 7

    4:11:01 PM #8 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    4:11:01 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 147136 (147136) = #147136/32:41.61
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 147136 blocks [E: HL-DT-ST DVD-RAM GSA-H22L]
    --------------------------------------------------------------

    4:11:13 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
    Prepare [E: HL-DT-ST DVD-RAM GSA-H22L] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 301334528, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 147136 | 0 | 0x00
    147136 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    4:11:13 PM #11 Text 0 File SCSIPTICommands.cpp, Line 215
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    4:11:13 PM #12 Text 0 File Burncd.cpp, Line 4294
    Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

    4:11:13 PM #13 Phase 24 File dlgbrnst.cpp, Line 1762
    Caching of files started

    4:11:13 PM #14 Text 0 File Burncd.cpp, Line 4413
    Cache writing successful.

    4:11:13 PM #15 Phase 25 File dlgbrnst.cpp, Line 1762
    Caching of files completed

    4:11:13 PM #16 Phase 36 File dlgbrnst.cpp, Line 1762
    Burn process started at 16x (22,160 KB/s)

    4:11:13 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    4:11:13 PM #18 Text 0 File Cdrdrv.cpp, Line 9872
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: MBIPG101
    Media type ID: R05
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8
    23 54 37 13 02 50 6B 02 - 8C 63 15 15 0B 0B 08 08 #T7..Pk..c......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    4:11:13 PM #19 Text 0 File DVDR.cpp, Line 6553
    Drive: HL-DT-ST DVD-RAM GSA-H22L
    Book Type request [LG]: DVD-ROM
    Changing the Book Type was finished successfully, return code 0

    4:11:13 PM #20 CDR -1207 File DVDR.cpp, Line 6477
    Book Type automatically set to: DVD-ROM

    4:11:13 PM #21 SPTI -1066 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
    Buffer x062957c0: Len x648

    4:11:13 PM #22 Text 0 File DVDPlusRW.cpp, Line 675
    Start write address at LBA 0
    DVD high compatibility mode: No

    4:11:13 PM #23 Text 0 File ThreadedTransfer.cpp, Line 269
    Pipe memory size 83836800

    4:15:35 PM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x80
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
    Buffer x07340040: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    4:15:35 PM #25 CDR -1135 File Writer.cpp, Line 303
    Write error
    E: HL-DT-ST DVD-RAM GSA-H22L

    4:15:35 PM #26 Text 0 File DVDPlusRW.cpp, Line 935
    EndDAO: Last written address 0

    4:15:35 PM #27 Phase 38 File dlgbrnst.cpp, Line 1762
    Burn process failed at 16x (22,160 KB/s)

    4:15:47 PM #28 Text 0 File SCSIPTICommands.cpp, Line 261
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    4:15:52 PM #29 Text 0 File Cdrdrv.cpp, Line 11185
    DriveLocker: UnLockVolume completed

    4:15:52 PM #30 Text 0 File SCSIPTICommands.cpp, Line 424
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


    AND LASTLY I TRIED BURNING ON A MINIDISC, ALSO NERO GIVES ME AN ERROR:

    Windows XP 5.1
    IA32
    WinAspi: -

    NT-SPTI used
    Nero Version: 7.9.6.0
    Internal Version: 7, 9, 6, 0
    (Nero Express)
    Recorder: <HL-DT-ST DVD-RAM GSA-H22L>Version: 1.02 - HA 1 TA 0 - 7.9.6.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-RAM GSA-H22L>Version: 1.02 - HA 1 TA 0 - 7.9.6.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H22L atapi Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-RAM GSA-H22L E: CdRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 767MB (785904kB)
    Free physical memory: 377MB (386120kB)
    Memory in use : 50 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    17.6.2007
    CD-ROM (ISO)
    4:21:19 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    4:21:19 PM #2 Text 0 File Isodoc.cpp, Line 6663
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : TAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    4:21:19 PM #3 Text 0 File Burncd.cpp, Line 3196
    HL-DT-ST DVD-RAM GSA-H22L
    Buffer underrun protection activated

    4:21:19 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3343
    First writeable address = 0 (0x00000000)

    4:21:19 PM #5 Text 0 File Burncd.cpp, Line 3508
    Turn on Track-At-Once, using CD-R/RW media

    4:21:20 PM #6 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 102450 ( 22:48.00)
    Last address to be written: 91619 ( 20:23.44)

    4:21:20 PM #7 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD DVD)

    4:21:20 PM #8 Text 0 File DlgWaitCD.cpp, Line 2964
    Recorder: HL-DT-ST DVD-RAM GSA-H22L;
    CDR code: 00 97 24 11; OSJ entry from: SONY Corporation
    ATIP Data:
    Special Info [hex] 1: D0 00 98, 2: 61 18 0B (LI 97:24.11), 3: 16 30 01 (LO 22:48.01)
    Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 00 00 (invalid)

    4:21:20 PM #9 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    4:21:20 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 793
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 91620 (91620) = #91620/20:21.45
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 91618 blocks [E: HL-DT-ST DVD-RAM GSA-H22L]
    --------------------------------------------------------------

    4:21:20 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
    Prepare [E: HL-DT-ST DVD-RAM GSA-H22L] for write in TAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 187944960, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    -150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 91620 | 0 | 0x00
    91620 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    4:21:20 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1066
    Removed 2 run-out blocks from end of track 1. Length: 91620 -> 91618.

    4:21:20 PM #13 Text 0 File SCSIPTICommands.cpp, Line 215
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    4:21:20 PM #14 Text 0 File Burncd.cpp, Line 4294
    Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

    4:21:20 PM #15 Phase 24 File dlgbrnst.cpp, Line 1762
    Caching of files started

    4:21:20 PM #16 Text 0 File Burncd.cpp, Line 4413
    Cache writing successful.

    4:21:20 PM #17 Phase 25 File dlgbrnst.cpp, Line 1762
    Caching of files completed

    4:21:20 PM #18 Phase 36 File dlgbrnst.cpp, Line 1762
    Burn process started at 24x (3,600 KB/s)

    4:21:20 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2721
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    4:21:20 PM #20 Text 0 File MMC.cpp, Line 22363
    Set BUFE: Buffer underrun protection -> ON

    4:21:20 PM #21 Text 0 File ThreadedTransfer.cpp, Line 269
    Pipe memory size 83836800

    4:23:26 PM #22 SPTI -1119 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1119)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x09
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 00 0E 20 00 00 20 00 00 00
    Sense Area: 0x70 00 04 00 00 00 00 0E 00 00 00 00 09
    Buffer x07d51c80: Len x10000
    0xA0 62 E3 E7 74 A7 51 BB 8D 1E C1 D3 B4 C9 88 38
    0x58 B8 63 E5 3F CC 85 39 D0 20 49 CD F2 3B 3F D2
    0x00 00 01 99 29 DE 56 97 4F 16 22 23 4F A9 4F B6

    4:23:26 PM #23 CDR -1119 File Writer.cpp, Line 303
    Track following error
    E: HL-DT-ST DVD-RAM GSA-H22L

    4:23:26 PM #24 CDR -201 File WriterStatus.cpp, Line 195
    Invalid write state
    E: HL-DT-ST DVD-RAM GSA-H22L

    4:23:39 PM #25 TRANSFER -18 File WriterStatus.cpp, Line 195
    Could not perform EndTrack

    4:23:43 PM #26 Text 0 File MMC.cpp, Line 17131
    <HL-DT-STDVD-RAM GSA-H22L> start Close Session

    4:24:37 PM #27 Phase 38 File dlgbrnst.cpp, Line 1762
    Burn process failed at 24x (3,600 KB/s)

    4:24:53 PM #28 Text 0 File SCSIPTICommands.cpp, Line 261
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    4:24:58 PM #29 Text 0 File Cdrdrv.cpp, Line 11185
    DriveLocker: UnLockVolume completed

    4:24:58 PM #30 Text 0 File SCSIPTICommands.cpp, Line 424
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


    I'M GOING CRAZY, I CAN'T BURN ANYTHING, I'M GOING LOCO, PLS SOMEBODY HELP ME!!!!PLS
     
  2. attar

    attar Senior member

    Joined:
    Jun 17, 2005
    Messages:
    11,504
    Likes Received:
    29
    Trophy Points:
    128
    Can you make the burner the master on the secondary on the end of the cable?
    Similar to this.
    CdRomPeripheral HL-DT-ST DVD-RAM GSA-H22N atapi Port 1 ID 0 DMA: On
     
    Last edited: Jun 17, 2007

Share This Page