1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

dvd shrink dual layer issue

Discussion in 'DVD Shrink forum' started by 1965cobra, Dec 17, 2007.

  1. 1965cobra

    1965cobra Member

    Joined:
    Dec 17, 2007
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    It gets past the encode then gets an error and kicks the disc out. I am using dvdshrink 3.2 have preferances set to dvd9 this is burning a dvddecryptor file. This is the first time I have attempted dual layer.
    I have a nec 2500a with updated firmware and dvdinfopro and nero tools both show the drive having dvd+RDL in both read and write catagories.

    Here is the error, I didn't copy it all, it kept on going with times and what not.

    ***serial removed***

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
    Nero API version: 6.3.1.25
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <_NEC DVD_RW ND-2500A> Version: 1.07 - HA 1 TA 0 - 6.3.1.25
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1200BB-32DWA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : Maxtor 94610U6 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LITE-ON COMBO LTC-48161H atapi Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    _NEC DVD_RW ND-2500A D: CDRom0
    LITE-ON COMBO LTC-48161H E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 121MB (124804kB)
    Memory in use : 74 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)
     
    Last edited: Dec 18, 2007
  2. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    11,493
    Likes Received:
    2
    Trophy Points:
    118
    You shouldn't even be needing DVD Shrink for a DL disc as it's primarily used as a compression tool. All you need to do is rip the movie to your HDD with DVDFab HD Decrypter and then burn with Imgburn in "build" mode. One two punch...You haven't included an entire log so we can't see what type of discs you are using, but I can tell you if you are using anything other than Verbatim DL discs you will probably continue to have problems. Also, although firmware is current, your drive is getting a little old...if you continue to have errors it might be time for a replacement.

    Imgburn "build" mode guide: http://forum.imgburn.com/index.php?showtopic=1780

    DVDFab HD Decrypter (free) ~ http://www.dvdfab.com/free.htm
    Imgburn (free) ~ http://www.imgburn.com
     
  3. 1965cobra

    1965cobra Member

    Joined:
    Dec 17, 2007
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    I am using some office depot discs that are DVD+RDL 2.4x8.5GB
    I tried the image burn but it wouldn't work that way either.
     
  4. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    11,493
    Likes Received:
    2
    Trophy Points:
    118
    More than likely due to the discs you are using or your "older" drive or a combination of the two.
     
  5. 1965cobra

    1965cobra Member

    Joined:
    Dec 17, 2007
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    here is the whole log

    Yes all my stuff is pretty stinking old, I am just waiting for a affordable HD DVD burner and will get a whole new computer then, I may be waiting awhile :)



    ***serial removed***
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
    Nero API version: 6.3.1.25
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <_NEC DVD_RW ND-2500A> Version: 1.07 - HA 1 TA 0 - 6.3.1.25
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1200BB-32DWA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : Maxtor 94610U6 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LITE-ON COMBO LTC-48161H atapi Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    _NEC DVD_RW ND-2500A D: CDRom0
    LITE-ON COMBO LTC-48161H E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 129MB (132348kB)
    Memory in use : 73 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    17.12.2007
    NeroAPI
    7:37:01 PM #1 Phase 112 File APIProgress.cpp, Line 273
    DVD-Video files reallocation started

    7:37:01 PM #2 Phase 114 File APIProgress.cpp, Line 273
    DVD-Video files reallocation completed (no file modified)

    7:37:01 PM #3 Phase 111 File APIProgress.cpp, Line 273
    DVD-Video files sorted

    7:37:01 PM #4 Text 0 File Reader.cpp, Line 126
    Reader running

    7:37:01 PM #5 Text 0 File Writer.cpp, Line 124
    Writer _NEC DVD_RW ND-2500A running

    7:37:01 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 817
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    7:37:01 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    7:37:01 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    7:37:01 PM #9 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-At-Once, using DVD media

    7:37:01 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 3894783 (865:30.33, 7606MB)
    Last address to be written: 2874047 (638:40.47, 5613MB)

    7:37:01 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO

    7:37:01 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: _NEC DVD_RW ND-2500A, Media type: DVD+R9 Double Layer

    7:37:01 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    7:37:01 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2874048 (2874048) = #2874048/638:40.48
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2874048 blocks [_NEC DVD_RW ND-2500A ]
    --------------------------------------------------------------

    7:37:01 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [_NEC DVD_RW ND-2500A ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 5886050304, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2874048 | lead-out | 1 | 0x00 | 0x41

    7:37:02 PM #16 Phase 24 File APIProgress.cpp, Line 273
    Caching of files started

    7:37:02 PM #17 Text 0 File Burncd.cpp, Line 4163
    Cache writing successful.

    7:37:02 PM #18 Phase 25 File APIProgress.cpp, Line 273
    Caching of files completed

    7:37:02 PM #19 Phase 36 File APIProgress.cpp, Line 273
    Burn process started at 2.4x (3,324 KB/s)

    7:37:02 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    7:37:02 PM #21 Text 0 File DVDPlusDualLayer.cpp, Line 408
    L0 Data Zone Capacity already set to 1947392 (1DB700h, 3803MB), requested last LBA L0 1443071 (1604FFh, 2818MB) ignored

    7:37:02 PM #22 CDR -1205 File DVDPlusDualLayer.cpp, Line 506
    Burning Layer 1

    7:37:02 PM #23 Text 0 File DVDPlusDualLayer.cpp, Line 514
    Start writing layer 1 at address 0 (0h)

    7:37:02 PM #24 SCSI -1066 File Cdrdrv.cpp, Line 1191
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06177000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    7:37:02 PM #25 Text 0 File DVDPlusRW.cpp, Line 628
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    7:37:04 PM #26 SCSI -1046 File Cdrdrv.cpp, Line 1445
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00CB0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x11
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x11

    7:37:04 PM #27 CDR -1046 File Writer.cpp, Line 304
    Illegal disc

    7:37:04 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    7:37:04 PM #29 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    7:37:04 PM #30 SCSI -1046 File Cdrdrv.cpp, Line 1191
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x11
    CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x11

    7:37:04 PM #31 SCSI -1046 File Cdrdrv.cpp, Line 1191
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x11
    CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x11

    7:37:04 PM #32 Phase 127 File APIProgress.cpp, Line 273
    Generating DVD high compatibility borders

    7:37:04 PM #33 CDR -1046 File WriterStatus.cpp, Line 164
    Illegal disc

    7:37:04 PM #34 TRANSFER -24 File WriterStatus.cpp, Line 164
    Could not perform end of Disc-at-once

    7:37:04 PM #35 Phase 38 File APIProgress.cpp, Line 273
    Burn process failed at 2.4x (3,324 KB/s)

    7:37:04 PM #36 Text 0 File AudioCompilationImpl.cpp, Line 828
    DRM: DRM burn session terminated.

    7:37:04 PM #37 Text 0 File AudioCompilationImpl.cpp, Line 857
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 9/13/2004 11:54:06 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 9/13/2004 11:54:46 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 9/13/2004 11:58:10 AM (InCD4 driver for win NT/2K/XP)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    Last edited: Dec 18, 2007
  6. 1965cobra

    1965cobra Member

    Joined:
    Dec 17, 2007
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    ok so I think it was the firmware, it would not even burn a dvd5. I changed it to v 1.09 (factory stuff) and it burned dvd5. I have tried a few versions of 1.07 beta 5 with no luck, including following the instructions on this webpage
    http://www.absoluteinsight.net/1205 I had version 5.1.2535.0 but right before I did the burn and and did the 1.07 version on the website above, So I beleive I actually downgraded, but the 5.1.2535.0 worked fine on dvd5. Does anyone know where I can get it again or a better version?
     
  7. bilbo65

    bilbo65 Regular member

    Joined:
    Feb 24, 2005
    Messages:
    2,558
    Likes Received:
    0
    Trophy Points:
    46
    You should really delete your serial number from your logs and edit them out in your previous postings....
     
  8. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    11,493
    Likes Received:
    2
    Trophy Points:
    118
    Serials removed...

    Try 1.0B from here: http://liggydee.cdfreaks.com/page/en/NEC-ND-2500A/


    This could probably be compressed easily with DVD Shrink and you could use a SL disc.


    Your drive isn't even seeing the media...there should be two more lines here that give the MID and other information about your blank. Firmware may fix this, but if it doesn't you will either need to try different media or get a new drive.

    Again, you are asking the drive to do something that it doesn't know how to do with your media. See above suggestion.

    This is Nero's own packet writing software that tends to bugger up the burning with some applications, including it's own. I would suggest removing it via this tool:

    http://www.softpedia.com/get/Tweak/Uninstallers/Nero-Clean-Tool-Bundle.shtml




     
  9. 1965cobra

    1965cobra Member

    Joined:
    Dec 17, 2007
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    thanks for the help and for deleting my serial #

    I tried to use the liggy dee firmware but when I unzip it using winrar I just get a bin file that opens up a text screen that does not update to the drive. What am I doing wrong, I would like dual layer just so I don't have to compress longer movies.
     
  10. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    11,493
    Likes Received:
    2
    Trophy Points:
    118
    Download Binflash Win32 GUI from here:

    http://binflash.cdfreaks.com/

    it will extract the .bin and flash your firmware. Make sure no discs are in the drive and you are not multitasking while you flash.
     

Share This Page