1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

DVD Shrink Error

Discussion in 'DVD Shrink forum' started by audstuen, Feb 8, 2005.

  1. audstuen

    audstuen Member

    Joined:
    Feb 8, 2005
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    I burned Die Another Day (James Bond film) and in some spots there is a little camera that pops up for a while when I'm watching the movie. Everything else works great, the picture is phenomenal, sound is awesome as well. The only bad side to it, is that I played this on my high dollar Surround Sound system. I went into my bedroom to play on that dvd player, and It wont read at all. The surround sound one is a five disc pioneer and the one in my room is a Koss. I know it isn't an expensive DVD player, but shouldn't it still play regardless of the quality? Let me know if I messed up. After all, it only is my first time doing it :p

    thanks
     
  2. saugmon

    saugmon Senior member

    Joined:
    Oct 9, 2004
    Messages:
    6,064
    Likes Received:
    1
    Trophy Points:
    116
    Usually a better quality media helps out on the stand alone players.Also too fast burn speed can cause some players not to play.

    Also formats can screw the stand alone players up.Here's a few tips,I have about 15 stand alone players that my backups play on.Only 1 had a format problem.

    1)high quality media
    2)sensible 4x max burn speed,you may have to go slower.
    3)dual format burner
    4)no paper/stick on labels

    The no disc error you get on the cheaper stand alone may be fixed by good media and slow burn speed.If not,try using the opposite format if your burner is capable.
    Sometimes there is something about the laser on your burner that a certain stand alone will not play no matter what you change. Let's hope it is not that.

    Please list your media<example sony -4x> and also your burner brand and model#

    Good Luck
     
    Last edited: Feb 9, 2005
  3. audstuen

    audstuen Member

    Joined:
    Feb 8, 2005
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    At first I was using a verbatim 4x now i switched to a sony. this time im burning attack of the clones and it pops back out saying it has an error, and then lists a bunch of thing im not familiar with. could this be burn speed, the media is already copied on, or a problem with the attack of the clones disc? thanks for the help

    my drive is a liteon 8x drive dual format
     
  4. ScubaBud

    ScubaBud Regular member

    Joined:
    Dec 29, 2004
    Messages:
    2,305
    Likes Received:
    0
    Trophy Points:
    46
    What program did you use to burn this DVD?
     
  5. audstuen

    audstuen Member

    Joined:
    Feb 8, 2005
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    newest version of shrink with the brand new nero....shouldnt that work?
     
  6. ScubaBud

    ScubaBud Regular member

    Joined:
    Dec 29, 2004
    Messages:
    2,305
    Likes Received:
    0
    Trophy Points:
    46
    Yes it should. Many who use DVDxCopy platforms find out that some of the players out there don't like the format they used. I have 3 PC's and one laptop and the laptop would do what you mentioned above.
     
  7. audstuen

    audstuen Member

    Joined:
    Feb 8, 2005
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    hmm interesting. attack of the clones is now at 95% encoded, so by the time you reply i may have started burning. another thing i dont know is how can you control the burn speed through Shrink. it does it at 4x and i wouldnt mind going slower. Also, the last few times i tried attack of the clones i left the encoding to stay unchanged instead of letting Shrink make it us, canada only (should that make a difference?) i dont know. thanks for all the help, hopefully ill be going great soon.
     
  8. audstuen

    audstuen Member

    Joined:
    Feb 8, 2005
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    didnt work....heresn the error. anyone with experience can tell me what this is id appreciate that. looks like i just wasted 3 dvds...

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:21:30 PM
    Nero API version: 6.6.0.6
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <LITE-ON DVDRW SOHW-812S> Version: US0A - HA 1 TA 1 - 6.6.0.6
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1200JB-00EVA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW SOHW-812S atapi Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    LITE-ON DVDRW SOHW-812S D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1022MB (1047276kB)
    Free physical memory: 594MB (608780kB)
    Memory in use : 41 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    9.2.2005
    NeroAPI
    12:56:06 PM #1 Phase 112 File APIProgress.cpp, Line 276
    DVD-Video files reallocation started

    12:56:07 PM #2 Phase 114 File APIProgress.cpp, Line 276
    DVD-Video files reallocation completed (no file modified)

    12:56:07 PM #3 Phase 111 File APIProgress.cpp, Line 276
    DVD-Video files sorted

    12:56:07 PM #4 Text 0 File Reader.cpp, Line 127
    Reader running

    12:56:07 PM #5 Text 0 File Writer.cpp, Line 122
    Writer LITE-ON DVDRW SOHW-812S running

    12:56:07 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    12:56:07 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    12:56:07 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    12:56:07 PM #9 Text 0 File Burncd.cpp, Line 3155
    Turn on Disc-At-Once, using DVD media

    12:56:37 PM #10 Text 0 File DlgWaitCD.cpp, Line 257
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286127 (508:01.52, 4465MB)

    12:56:37 PM #11 Text 0 File DlgWaitCD.cpp, Line 269
    Write in overburning mode: NO

    12:56:37 PM #12 Text 0 File DlgWaitCD.cpp, Line 2311
    Recorder: LITE-ON DVDRW SOHW-812S, Media type: DVD-R
    Disc Manufacturer: MCC 01 - RG20
    Disc Application Code: 64, Disc Physical Code: 193

    12:56:37 PM #13 Text 0 File DlgWaitCD.cpp, Line 431
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

    12:56:37 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 829
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [LITE-ON DVDRW SOHW-812S]
    --------------------------------------------------------------

    12:56:37 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1042
    Prepare recorder [LITE-ON DVDRW SOHW-812S] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286128 | lead-out | 1 | 0x41 | 0x00

    12:56:37 PM #16 Phase 24 File APIProgress.cpp, Line 276
    Caching of files started

    12:56:37 PM #17 Text 0 File Burncd.cpp, Line 4042
    Cache writing successful.

    12:56:37 PM #18 Phase 25 File APIProgress.cpp, Line 276
    Caching of files completed

    12:56:37 PM #19 Phase 36 File APIProgress.cpp, Line 276
    Burn process started at 4x (5,540 KB/s)

    12:56:37 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2604
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:57:08 PM #21 Text 0 File DVDR.cpp, Line 2300
    Recording mode: Sequential Recording Mode

    12:57:08 PM #22 Text 0 File Mmc.cpp, Line 21079
    Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

    12:57:08 PM #23 Text 0 File DVDR.cpp, Line 2441
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    12:57:08 PM #24 Text 0 File Cdrdrv.cpp, Line 8332
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    12:57:21 PM #25 Text 0 File Cdrdrv.cpp, Line 1284
    12:57:21.671 - LITE-ON DVDRW SOHW-812S\H1 T1 : Queue again later

    12:59:37 PM #26 SCSI -1135 File Cdrdrv.cpp, Line 1432
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x013D0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x02 0x64 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    12:59:37 PM #27 CDR -1135 File Writer.cpp, Line 311
    Write error

    12:59:37 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    12:59:37 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    12:59:37 PM #30 Text 0 File DVDR.cpp, Line 2682
    EndDAO: Last written address was 156671

    12:59:37 PM #31 Phase 38 File APIProgress.cpp, Line 276
    Burn process failed at 4x (5,540 KB/s)

    12:59:37 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    12:59:37 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=6.0.0.171 , size=24839 bytes, created 1/13/2003 10:19:26 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 2/7/2005 6:54:52 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
  9. saugmon

    saugmon Senior member

    Joined:
    Oct 9, 2004
    Messages:
    6,064
    Likes Received:
    1
    Trophy Points:
    116
    Hey audstuen, Your media code on those discs are mcc 01-rg20. I have just ran into a 5 pack of verbatim -4x digital movie quality to try out,with that same code #.Very nice cases. I am very disappointed with these discs. The first one i used was ok, but I tried to do notebook this morning,and when I woke up,I had a burn error.This is the first actual burn error I had in the last 200 burns,including many re-rips of my backups.The very few errors I get are usually black screens of death,lol

    That media code would not let me lower the burn speed,4x only. I have got 3 more left and I won't expect much out of them.

    Try some maxell's -4x yellow tops, They haven't disappointed me yet.
    Also try out some maxell +4x.
     
    Last edited: Feb 9, 2005
  10. audstuen

    audstuen Member

    Joined:
    Feb 8, 2005
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    ok so the theres a sony -4x i tried too and it did the same thing. all im doing...is popping the disc in, letting it do its analysis, and then backing up, then burning, it wont let me do anything without having DVD43 running, but thats what i did with my james bond movie and its fine. i JUST tried doing antwone fisher and it wont work. should i just wait til i get my yellow topped maxell's or am i screwing something up. Also which region setting should i choose (leave the RCE setting alone, or specify option)? thanks
     
  11. saugmon

    saugmon Senior member

    Joined:
    Oct 9, 2004
    Messages:
    6,064
    Likes Received:
    1
    Trophy Points:
    116
    With some of the newer encryptions, anydvd has been working to help pull off the encryptions for dvd shrink,like The Grudge. It's a free 21 day trial.

    I leave all my backups "region-free" in dvd shrink.These should be viewable anywhere in the world.

    Sony -4x, I am not particularly fond of,some of them are made in austria,"the colored ones".The + 1-8x's are a lot better,the ones manufactured in japan are ty's. These give me a range of 2.4x to 16x on them.

    If you could pick up some Rw's to practice on to save on the coasters,but stand alones seem to have more trouble playing them.

    Lower that backup target,open dvd shrink,edit,preferences, set it from dvd-5 to custom,enter 4300 mbs,and hit OK. This reduced target can save on coasters.
     
  12. audstuen

    audstuen Member

    Joined:
    Feb 8, 2005
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    thanks a lot! I think i may have an rw or two laying around. the -r's i have are colored sonys...theyre 4x and i hve a purple and a yellow one. my verbatims are the flat grey color with a film strip across them. they all work great for burning my home movies off of my handycam, but i guess this is another story. my friend works at the local radioshack and im always in there buying stuff, but neither he or i can remember which brand they have. im going to try maxell and memorex, and that japanese brand TY. one last ? would the rw play in a dvd player? thanks
     
  13. jim_dandy

    jim_dandy Active member

    Joined:
    Jan 9, 2004
    Messages:
    2,493
    Likes Received:
    0
    Trophy Points:
    66
    Ive been using the verbatim digital movie disc for several months and ive never had a problem with them.
    I guess there are bad batches of any kind of media,good or bad.
    Ive heard some people having trouble with the maxell yellow tops,so i guess you never really know for sure.
    It might be more about the burner than the media when it comes to the good stuff.
     
    Last edited: Feb 9, 2005
  14. audstuen

    audstuen Member

    Joined:
    Feb 8, 2005
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    well tomorrow im going to buy the new discs...if that doesnt help im going to have my friend burn a copy of icopydvd's2 for me. he uses dvd43 and i copy and burned animal house for me. we'll see i suppose
     
  15. saugmon

    saugmon Senior member

    Joined:
    Oct 9, 2004
    Messages:
    6,064
    Likes Received:
    1
    Trophy Points:
    116
    Those colored sony -4x'x are probably made in austria.I think yellow,purple,and red. I had a 5 pack given to me and I burned them as slow as possible just to keep the possibility of errors.I also didn't put anything important on them.

    Beware of memmorex, unless you get the ones produced by "prodisc"the more likely you'll get c-mags.That's why I refer maxell's.The 4 different manufacturers are pretty good quality:hitachi,ty,ricohjpn,and ritek.Those yellow tops are made by all of them except for ricohjpn.Ricohjpn made all of their + media that I have used,appox 100 with only 1 coaster.

    Ty's are said to be the best,but beware of fakes. It's said there are a lot of fake ty's floating around.

    Those verbatim with the film spool,"digital movie quality", are working great on the + format. The - format gave me 1 coaster out of the first 2 burns.I'm glad i got only 1 - 5-pack.

    Since you get your media at radio shack, if you have a staples,best buy,or office depot around,they always have some pretty good media on sale. This week sucked,only memorex at staples and phillips at office depot. I don't pay more than 40 cents apiece for them when they are on sale.I just picked up 350 sony +1-8x at staples a few weeks ago made by ty. That is why I look for made in japan on those wrappers.They let me go 16x if I don't double check those settings.I still only burn at 4x.

    Rw's are great to practice with when you run into trouble,however stand alone players seem to have more trouble playing those burns.Since you have 1 or 2 laying around,try them out.

    Also on why your burn can be a certain speed only,like those verb -4x: Your burner's firmware controls the speed.Firmware is the program that tells your burner what media is inserted "manufacturers code" and all the ranges it will burn. That's why I can get 16x out of the sony +1-8x and only 4x on those verbatim -4x.

    The quality of media is the most critical part of the dvd burning process. Later
     
  16. audstuen

    audstuen Member

    Joined:
    Feb 8, 2005
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    i have all of those stores within 15 minutes of my house but i dont feel like driving there. plus i know my friend bob will give me his discount....ill get a ten pack of memorex for like 6.50 with the cases. usually he sells stuff to me at ten percent above cost. ill remember maxell. but yeah can a dvdrw play in a regular player. i also only have -r's right now
     
  17. saugmon

    saugmon Senior member

    Joined:
    Oct 9, 2004
    Messages:
    6,064
    Likes Received:
    1
    Trophy Points:
    116
    rw's can be trickier.Like I stated before,they are great to practice with,view them on your pc,but not reliable to view on certain stand alone players.Stand alone player's lasers have a harder time reading them compared to a standard dvd-r.That's the case in all my stand alone players,tv home burner, and both pc burners.I have more issues on the rw's compared to my + or - r's.
     

Share This Page